Shape Optimization of Pin-Fins by Free-Form Deformation and Active Learning Surrogate Model

被引:1
|
作者
Yang, Fan [1 ]
Chen, Zhaolin [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Nanjing 210016, Peoples R China
关键词
HEAT-TRANSFER; MULTIOBJECTIVE OPTIMIZATION; SINKS; PERFORMANCE; SURFACES; FLOW;
D O I
10.2514/1.T6687
中图分类号
O414.1 [热力学];
学科分类号
摘要
The shapes of pin-fins play an essential role in enhancing overall and local forced convective heat removal. This study presents a new design optimization scheme based on the free shape deformation method, which gives rise to nonuniform pin-fin shapes depending on local flow structures interacting with each local pin-fin. The grid of pin-fins is embedded in a parameter space formed by basic function and control points. By moving the position of the control points, the shapes of the pin-fins and the neighborhood grid are deformed during optimization. The optimization objective function is the heat transfer coefficient of the pin-fin arrays at a limited pressure drop to ensure cycle efficiency. In addition, to reduce the computational resources, the active learning surrogate model for constraint global optimization is adopted, which is combined with computationally expensive computational fluid dynamics simulations. To exemplify the effectiveness of the proposed method on optimizing the pin-fin shape, two-dimensional pin-fins in inline arrangements are considered. Finally, an improvement in the heat transfer of 33.4% is achieved as compared to the baseline. Therefore, the proposed method of pin-fin optimization is effective in improving thermal performance.
引用
收藏
页码:448 / 456
页数:9
相关论文
共 50 条
  • [41] Research on free-form surface optimization method based on surface shape transformation
    Li Junyang
    Li Zhuo
    Zhou Liang
    Liu Longfei
    Long You
    AOPC 2021: OPTICAL SENSING AND IMAGING TECHNOLOGY, 2021, 12065
  • [42] Shape optimization of free-form shell structures combining static and dynamic behaviors
    Jiang, Baoshi
    Zhang, Jingyao
    Ohsaki, Makoto
    STRUCTURES, 2021, 29 : 1791 - 1807
  • [43] Multi-objective free-form shape optimization of a synchronous reluctance machine
    Gangl, Peter
    Koethe, Stefan
    Mellak, Christiane
    Cesarano, Alessio
    Muetze, Annette
    COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2022, 41 (05) : 1849 - 1864
  • [44] Free-Form Shape Optimization of Advanced High-Strength Steel Members
    Yin, Lingfeng
    Deng, Tianyang
    Niu, Yu
    Li, Zhanjie
    BUILDINGS, 2022, 12 (12)
  • [45] Analysis Driven Shape Design using Free-form Deformation of Parametric CAD Geometry
    Gomez, Marlena C.
    Galbraith, Marshall C.
    AIAA SCITECH 2024 FORUM, 2024,
  • [46] Free-form optimization of pattern shape for improving mechanical characteristics of a concentric tube
    Song, Hyunggwi
    Park, Eunjeong
    Kim, Hong Jae
    Park, Chung-Il
    Kim, Taek-Soo
    Kim, Yoon Young
    Ryu, Seunghwa
    MATERIALS & DESIGN, 2023, 230
  • [47] Two-step shape optimization methodology for designing free-form shells
    Liu, Yang
    Shimoda, Masatoshi
    INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, 2015, 23 (01) : 1 - 15
  • [48] Iterative, simulation-based shape modification by free-form deformation of the NC programs
    Sacharow, A.
    Odendahl, S.
    Peuker, A.
    Biermann, D.
    Surmann, T.
    Zabel, A.
    ADVANCES IN ENGINEERING SOFTWARE, 2013, 56 : 63 - 71
  • [49] Aerothermal optimization of a turbine rotor tip configuration based on free-form deformation approach
    Tao, Zhi
    Li, Weiqi
    Guo, Zhendong
    Chen, Yun
    Song, Liming
    Li, Jun
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2024, 110
  • [50] AERODYNAMIC DESIGN OPTIMIZATION OF CENTRIFUGAL COMPRESSOR BLADE USING PARAMETERIZED FREE-FORM DEFORMATION
    Xu, Dongqiang
    Yu, Jianyang
    Shen, Jinsong
    Li, Ning
    Song, Yanping
    Yang, Xinlong
    PROCEEDINGS OF ASME TURBO EXPO 2024: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2024, VOL 12D, 2024,