Shape Optimization of Pin-Fins by Free-Form Deformation and Active Learning Surrogate Model

被引:1
|
作者
Yang, Fan [1 ]
Chen, Zhaolin [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Nanjing 210016, Peoples R China
关键词
HEAT-TRANSFER; MULTIOBJECTIVE OPTIMIZATION; SINKS; PERFORMANCE; SURFACES; FLOW;
D O I
10.2514/1.T6687
中图分类号
O414.1 [热力学];
学科分类号
摘要
The shapes of pin-fins play an essential role in enhancing overall and local forced convective heat removal. This study presents a new design optimization scheme based on the free shape deformation method, which gives rise to nonuniform pin-fin shapes depending on local flow structures interacting with each local pin-fin. The grid of pin-fins is embedded in a parameter space formed by basic function and control points. By moving the position of the control points, the shapes of the pin-fins and the neighborhood grid are deformed during optimization. The optimization objective function is the heat transfer coefficient of the pin-fin arrays at a limited pressure drop to ensure cycle efficiency. In addition, to reduce the computational resources, the active learning surrogate model for constraint global optimization is adopted, which is combined with computationally expensive computational fluid dynamics simulations. To exemplify the effectiveness of the proposed method on optimizing the pin-fin shape, two-dimensional pin-fins in inline arrangements are considered. Finally, an improvement in the heat transfer of 33.4% is achieved as compared to the baseline. Therefore, the proposed method of pin-fin optimization is effective in improving thermal performance.
引用
收藏
页码:448 / 456
页数:9
相关论文
共 50 条
  • [31] Constrained shape optimization of free-form shells considering material creep
    San, Bingbing
    He, Haiyun
    Feng, Dongming
    Qiu, Ye
    Huang, Yanting
    ENGINEERING OPTIMIZATION, 2022, 54 (10) : 1787 - 1800
  • [32] Shape optimization of free-form cable-braced grid shells
    The Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University, Nanjing 210096, China
    不详
    Tumu Gongcheng Xuebao, 4 (64-70):
  • [33] Probabilistic approach to free-form airfoil shape optimization under uncertainty
    Huyse, L
    Padula, SL
    Lewis, RM
    Li, W
    AIAA JOURNAL, 2002, 40 (09) : 1764 - 1772
  • [34] Aerodynamic shape optimization of a single turbine stage based on parameterized Free-Form Deformation with mapping design parameters
    Li, Lei
    Jiao, Jiangkun
    Sun, Shouyi
    Zhao, Zhenan
    Kang, Jialei
    ENERGY, 2019, 169 : 444 - 455
  • [35] Shape-thickness-topology coupled optimization of free-form shells
    Meng, Xianchuan
    Xiong, Yulin
    Xie, Yi Min
    Sun, Yuxin
    Zhao, Zi-Long
    AUTOMATION IN CONSTRUCTION, 2022, 142
  • [36] Integrated passage design based on extended free-form deformation and adjoint optimization
    LI, Xin
    Meng, Tongtong
    Li, Weiwei
    Zhou, Ling
    Ji, Lucheng
    CHINESE JOURNAL OF AERONAUTICS, 2023, 36 (04) : 148 - 164
  • [37] Constrained airfoil optimization using the area-preserving free-form deformation
    Leloudas, Stavros N.
    Strofylas, Giorgos A.
    Nikolos, Ioannis K.
    AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2018, 90 (06): : 914 - 926
  • [38] Multidisciplinary Design Optimization Based on Parameterized Free-Form Deformation for Single Turbine
    Li, Lei
    Yuan, Tianyu
    Li, Yuan
    Yang, Weizhu
    Kang, Jialei
    AIAA JOURNAL, 2019, 57 (05) : 2075 - 2087
  • [39] Integrated passage design based on extended free-form deformation and adjoint optimization
    Xin LI
    Tongtong MENG
    Weiwei Li
    Ling ZHOU
    Lucheng JI
    Chinese Journal of Aeronautics , 2023, (04) : 148 - 164
  • [40] Integrated passage design based on extended free-form deformation and adjoint optimization
    Xin LI
    Tongtong MENG
    Weiwei Li
    Ling ZHOU
    Lucheng JI
    Chinese Journal of Aeronautics, 2023, 36 (04) : 148 - 164