Fretting-fatigue of shrink fit lug-bush assemblies: Interference-fit effect

被引:4
|
作者
Le Falher, M. [1 ,2 ,3 ]
Fouvry, S. [1 ]
Arnaud, P. [2 ]
Maurel, V. [2 ]
Antoni, N. [4 ]
Billardon, R. [3 ]
机构
[1] Ecole Cent Lyon, Lab Tribol & Dynam Syst LTDS, Ecully, France
[2] Mines Paris ParisTech, Ctr Mat, Evry, France
[3] Safran Transmiss Syst, Colombes, France
[4] Safran Landing Syst, Velizy Villacoublay, France
关键词
Fretting; Fatigue; Lug-bush; Interference-fit; Ti-6Al-4V; MAXIMUM EQUIVALENT STRESS; PIN-LOADED LUG; FAILURE-MECHANISM; TI-6AL-4V; WEAR; FRICTION; JOINTS; LIFE;
D O I
10.1016/j.triboint.2023.108581
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The fretting-fatigue behaviour of shrink fit lug-bush assemblies is investigated. In this paper, experimental fa-tigue tests are carried out on lug-bush specimens with three different levels of interference fit. It is observed that the relative movements of fretting induce tribo-oxidation phenomena at the shrink-fit interface and that the crack initiation sites correspond well to the oxides formation spots. The increase in the fatigue life with interference fit is consistent with stress analysis considering the SWT multiaxial fatigue criterion, but the predicted fatigue life is not conservative relative to material reference data. In order to account for fretting surface damage, different approaches are investigated considering homogeneous and heterogeneous distributions of the coefficient of friction.
引用
收藏
页数:18
相关论文
共 48 条
  • [31] Effect of radial interference on torque capacity of press- and shrink-fit gears
    S. J. Chu
    T. K. Jeong
    E. H. Jung
    International Journal of Automotive Technology, 2016, 17 : 763 - 768
  • [32] A fretting fatigue setup for testing shrink-fit connections and experimental evidence of the strength enhancement induced by deep rolling
    Bertini, L.
    Santus, C.
    Merlo, A.
    Bandini, M.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (09) : 1432 - 1439
  • [33] Research on the fretting contact fatigue strength of interference fit in high speed rail traction motor shafts
    Bian, Xinxiao
    Wei, Chen
    Liu, Yuanrong
    ENGINEERING FAILURE ANALYSIS, 2024, 157
  • [34] Effect of interference percentage on damage mechanism of carbon fiber reinforced plastics laminate during interference-fit bolt installation
    Song, Danlong
    Zhang, Kaifu
    Li, Yuan
    Liu, Ping
    Yan, Xiaoye
    Su, Wenlong
    JOURNAL OF COMPOSITE MATERIALS, 2017, 51 (08) : 1031 - 1043
  • [35] Interference fit effect on improving fatigue life of a holed single plate
    Croccolo, D.
    De Agostinis, M.
    Ceschini, L.
    Morri, A.
    Marconi, A.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2013, 36 (07) : 689 - 698
  • [36] Waving behaviour of fatigue stress fluctuation in shrink-fit assemblies using 3D finite elements
    Nguyen, H. N.
    Le, V. N.
    Champliaud, H.
    Martin, F.
    HIGH PERFORMANCE STRUCTURES AND MATERIALS IV, 2008, 97 : 459 - 469
  • [37] Interference-Fit Effect on Improving Bearing Strength and Fatigue Life in a Pin-Loaded Woven Carbon Fiber-Reinforced Plastic Laminate
    Kim, Sang-Young
    Kim, Dave
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2019, 141 (02):
  • [38] The effect of interference fit size on the fatigue life of bolted joints in composite laminates
    Wei, Jingchao
    Jiao, Guiqiong
    Jia, Purong
    Huang, Tao
    COMPOSITES PART B-ENGINEERING, 2013, 53 : 62 - 68
  • [39] Influence of Fabrication and Interference-Fit Techniques on Tensile and Fatigue Properties of Pin-Loaded Glass Fiber Reinforced Plastics Composites
    Kim, Sang-Young
    Hennigan, Daniel J.
    Kim, Dave
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2012, 134 (04):
  • [40] Effect of secondary bending and bolt load on damage and strength of composite single-lap interference-fit bolted structures
    Zhang, Kaifu
    Hu, Junshan
    Zou, Peng
    Cheng, Yi
    Luo, Bing
    Cheng, Hui
    JOURNAL OF COMPOSITE MATERIALS, 2019, 53 (28-30) : 4385 - 4398