Experimental investigation of the cyclic degradation of the one-way shape memory effect of NiTi alloys

被引:0
|
作者
Tian-xing Zhao [1 ,2 ]
Guo-zheng Kang [1 ,2 ]
Chao Yu [1 ,2 ]
Qian-hua Kan [1 ,2 ]
机构
[1] Institute of Applied Mechanics, State Key Laboratory of Traction Power, Southwest Jiaotong University
[2] Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Engineering, Southwest Jiaotong University
基金
中国国家自然科学基金;
关键词
Ni Ti shape memory alloys; one-way shape memory effect; cyclic degradation; thermo-mechanical coupling; martensite orientation;
D O I
暂无
中图分类号
TG139.6 [];
学科分类号
摘要
Based on stress-and strain-controlled cyclic tension-unloading-heat-cooling tests, cyclic degradation of the one-way shape memory effect(OWSME) of NiTi shape memory alloys(SMAs) was investigated. It was seen, in thermo-mechanical coupled cyclic tests, that residual strain after each cycle accumulated, but the martensite reorientation stress and dissipation energy-per-cycle decreased as the number of cycles increased. Meanwhile, the cyclic degradation of OWSME was aggravated by increasing the stress/strain amplitude. In addition, the stress-strain response of NiTi SMAs was further investigated by performing simultaneous thermo-mechanical coupled cyclic tests with various phase-angle differences between the mechanical and thermal cyclic loadings. It can be concluded that such cyclic response depends significantly on prescribed phase-angle differences. Obtained experimental results are helpful for both the development of constitutive models and engineering applications of NiTi SMAs.
引用
收藏
页码:1539 / 1550
页数:12
相关论文
共 50 条
  • [31] 2-WAY TRAINING OF NITI SHAPE MEMORY ALLOYS
    ESCHER, K
    METALL, 1990, 44 (01): : 23 - 28
  • [32] The triple-shape memory effect in NiTi shape memory alloys
    Tang, C.
    Huang, W. M.
    Wang, C. C.
    Purnawali, H.
    SMART MATERIALS AND STRUCTURES, 2012, 21 (08)
  • [33] Cyclic deformation mechanisms in precipitated NiTi shape memory alloys
    Gall, K
    Maier, H
    ACTA MATERIALIA, 2002, 50 (18) : 4643 - 4657
  • [34] Experimental investigation into NiTi shape memory alloy panels under cyclic shear loading
    Liu, Wenyuan
    Sun, Guohua
    Chen, Li
    Kong, Jing
    ENGINEERING STRUCTURES, 2021, 245
  • [35] The effect of employed loading mode on the mechanical cyclic stabilization of NiTi shape memory alloys
    Dilibal, S.
    Hamilton, R. F.
    Lanba, A.
    INTERMETALLICS, 2017, 89 : 1 - 9
  • [36] Experimental investigations on the effect of copper on the microstructure and shape memory characteristics of NiTi alloys
    Santosh, S.
    Sampath, V
    3RD INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING (ICAME 2020), PTS 1-6, 2020, 912
  • [37] Anisotropic behavior of superelastic NiTi shape memory alloys; an experimental investigation and constitutive modeling
    Mehrabi, Reza
    Andani, Masood Taheri
    Elahinia, Mohammad
    Kadkhodaei, Mahmoud
    MECHANICS OF MATERIALS, 2014, 77 : 110 - 124
  • [38] Measurement of recovery force in one-way shape memory effect of carbon nanotube
    Itaya, Shotaro
    Hirahara, Kaori
    Nakayama, Yoshikazu
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2012, 78 (789): : 669 - 673
  • [39] The two way shape memory effect of shape memory alloys: an experimental study and a phenomenological model
    Lexcellent, C
    Leclercq, S
    Gabry, B
    Bourbon, G
    INTERNATIONAL JOURNAL OF PLASTICITY, 2000, 16 (10-11) : 1155 - 1168
  • [40] Assessing the morphology of selective laser melted NiTi-scaffolds for a three-dimensional quantification of the one-way shape memory effect
    Bormann, Therese
    de Wild, Michael
    Beckmann, Felix
    Mueller, Bert
    BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2013, 2013, 8689