Experimental investigation of the cyclic degradation of the one-way shape memory effect of NiTi alloys

被引:0
|
作者
Tian-xing Zhao [1 ,2 ]
Guo-zheng Kang [1 ,2 ]
Chao Yu [1 ,2 ]
Qian-hua Kan [1 ,2 ]
机构
[1] Institute of Applied Mechanics, State Key Laboratory of Traction Power, Southwest Jiaotong University
[2] Applied Mechanics and Structure Safety Key Laboratory of Sichuan Province, School of Mechanics and Engineering, Southwest Jiaotong University
基金
中国国家自然科学基金;
关键词
Ni Ti shape memory alloys; one-way shape memory effect; cyclic degradation; thermo-mechanical coupling; martensite orientation;
D O I
暂无
中图分类号
TG139.6 [];
学科分类号
摘要
Based on stress-and strain-controlled cyclic tension-unloading-heat-cooling tests, cyclic degradation of the one-way shape memory effect(OWSME) of NiTi shape memory alloys(SMAs) was investigated. It was seen, in thermo-mechanical coupled cyclic tests, that residual strain after each cycle accumulated, but the martensite reorientation stress and dissipation energy-per-cycle decreased as the number of cycles increased. Meanwhile, the cyclic degradation of OWSME was aggravated by increasing the stress/strain amplitude. In addition, the stress-strain response of NiTi SMAs was further investigated by performing simultaneous thermo-mechanical coupled cyclic tests with various phase-angle differences between the mechanical and thermal cyclic loadings. It can be concluded that such cyclic response depends significantly on prescribed phase-angle differences. Obtained experimental results are helpful for both the development of constitutive models and engineering applications of NiTi SMAs.
引用
收藏
页码:1539 / 1550
页数:12
相关论文
共 50 条
  • [21] Two-way antagonistic shape actuation based on the one-way shape memory effect
    Sofla, A. Y. N.
    Elzey, D. M.
    Wadley, H. N. G.
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, 2008, 19 (09) : 1017 - 1027
  • [22] CYCLIC AND FATIGUE BEHAVIOR OF NITI SHAPE MEMORY ALLOYS
    Moumni, Ziad
    Zaki, Wael
    Maitournam, Habibou
    SMST-2007: PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON SHAPE MEMORY AND SUPERELASTIC TECHNOLOGIES, 2008, : 193 - +
  • [23] Fatigue Life Prediction for NiTi Shape Memory Alloy Micro-tubes Under Uniaxial Stress-Controlled One-Way Shape Memory Cyclic Loading
    Zhao, Tianxing
    Kang, Guozheng
    ACTA MECHANICA SOLIDA SINICA, 2022, 35 (01): : 15 - 25
  • [24] The effect of training on two-way shape memory effect of binary NiTi and NiTi based ternary high temperature shape memory alloys
    Atli, K. C.
    Karaman, I.
    Noebe, R. D.
    Gaydosh, D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 560 : 653 - 666
  • [25] Deformation behaviour and two-way shape memory effect of NiTi alloys
    Prader, P
    Kneissl, AC
    ZEITSCHRIFT FUR METALLKUNDE, 1997, 88 (05): : 410 - 415
  • [26] Training of the two-way shape memory effect by bending in NiTi alloys
    Lahoz, R
    Gracia-Villa, L
    Puértolas, JA
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2002, 124 (04): : 397 - 401
  • [27] Fatigue Life Prediction for NiTi Shape Memory Alloy Micro-tubes Under Uniaxial Stress-Controlled One-Way Shape Memory Cyclic Loading
    Tianxing Zhao
    Guozheng Kang
    Acta Mechanica Solida Sinica, 2022, 35 : 15 - 25
  • [28] Hysteresis modeling of two-way shape memory effect in NiTi alloys
    A. Falvo
    F. Furgiuele
    C. Maletta
    Meccanica, 2008, 43 : 165 - 172
  • [29] Hysteresis modeling of two-way shape memory effect in NiTi alloys
    Falvo, A.
    Furgiuele, F.
    Maletta, C.
    MECCANICA, 2008, 43 (02) : 165 - 172
  • [30] Two-way training of NiTi shape memory alloys
    Zweiweg-Formgedaechtnistraining von NiTi-Legierungen
    Escher, K., 1600, (44):