Investigation of the mechanical performance of Al-coated DI steel sheets prepared by DC magnetron sputtering

被引：0
|
作者：
QIAO Zhaohui [1 ]
TIAN Guangke [2 ]
机构：
[1] Research Institute,Baoshan Iron &Steel Co.,Ltd.
[2] Lanzhou Jiaotong University
来源：
BaosteelTechnicalResearch | 2014年 / 8卷 / 01期
关键词：
Al; magnetron sputtering; packing materials; formability;
D O I：
暂无
中图分类号：
TG174.4 [金属表面防护技术];
学科分类号：
080503 ;
摘要：
Aluminum films coated on DI steel sheets were prepared by direct current(DC)magnetron sputtering. The influence of the deposition conditions and film thickness on the formability of coated steel sheets was studied. The results of the cupping test and drawing test show that the substrate temperature and thickness of Al films are the key factors that affect Al adhesion and formability of coated steel sheets.Adhesion became worse when the thickness of Al sheets was more than 2μm.And formability was improved remarkably when the substrate temperature was increased to 200℃.
引用
收藏
页码：20 / 23
页数：4
相关论文
共 50 条
  • [31] Fabrication and its characteristics of hard coating Ti-Al-N system prepared by DC magnetron sputtering
    Xuyang Zhou
    Aimin Wu
    Wenchao Qu
    Xin Jiang
    Rare Metals, 2012, 31 : 178 - 182
  • [32] Influence of hydrogen plasma thermal treatment on the properties of ZnO:Al thin films prepared by dc magnetron sputtering
    Castro, M. V.
    Cerqueira, M. P.
    Rebouta, L.
    Alpuim, P.
    Garcia, C. B.
    Junior, G. L.
    Tavares, C. J.
    VACUUM, 2014, 107 : 145 - 154
  • [33] Structure and mechanical properties of (Ti,Al)(B,N) coatings fabricated by reactive DC magnetron sputtering
    Morales-Hernández, J
    García-González, L
    Muñoz-Saldaña, J
    Espinoza-Beltrán, FJ
    VACUUM, 2004, 76 (2-3) : 161 - 164
  • [34] Structure and Mechanical Properties of (CrAl)N and (CrAlSiY)N Coatings Prepared by Asymmetrical Bipolar DC Magnetron Sputtering
    Li, Ming-Sheng
    Jiang, Quan-Ying
    Wang, Ren-Dong
    Fan, Yong-Zhong
    PROCEEDINGS OF THE 2ND ANNUAL INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL ENGINEERING (AME 2016), 2016, 85 : 1054 - 1060
  • [35] Effect of buffer thickness on the properties of Al-doped ZnO thin films prepared by DC magnetron sputtering
    Zhu, Ke
    Wang, Haibin
    Xiao, Faxin
    Xu, Feng
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2017, 28 (10) : 7302 - 7306
  • [36] Effect of structure on the mechanical properties of Ta and Ta(N) thin films prepared by reactive DC magnetron sputtering
    Saha, R
    Barnard, JA
    JOURNAL OF CRYSTAL GROWTH, 1997, 174 (1-4) : 495 - 500
  • [37] Effect of structure on the mechanical properties of Ta and Ta(N) thin films prepared by reactive DC magnetron sputtering
    Univ of Alabama, Tuscaloosa, United States
    J Cryst Growth, 1-4 (495-500):
  • [38] Thermal stability, structure and mechanical properties of TiSiN coatings prepared by reactive DC magnetron co-sputtering
    Garcia-Gonzalez, L.
    Morales-Hernandez, J.
    Espinoza-Beltran, F. J.
    Munoz-Saldana, J.
    Scholz, T.
    Schneider, G. A.
    ADVANCED STRUCTURAL MATERIALS II, 2006, 509 : 93 - 98
  • [39] INVESTIGATION OF AL2O3 LAYERS OBTAINED BY DC PLANAR-MAGNETRON SPUTTERING
    KIROV, KI
    ATANASOVA, ED
    IVANOV, NA
    PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1978, 50 (01): : 363 - 368
  • [40] Investigation on dye ability and antibacterial activity of nanolayer platinum coated polyester fabric using DC magnetron sputtering
    Shahidi, Sheila
    Ghoranneviss, Mahmood
    PROGRESS IN ORGANIC COATINGS, 2011, 70 (04) : 300 - 303
12345