Investigation of the mechanical performance of Al-coated DI steel sheets prepared by DC magnetron sputtering

被引:0
|
作者
QIAO Zhaohui [1 ]
TIAN Guangke [2 ]
机构
[1] Research Institute,Baoshan Iron &Steel Co.,Ltd.
[2] Lanzhou Jiaotong University
关键词
Al; magnetron sputtering; packing materials; formability;
D O I
暂无
中图分类号
TG174.4 [金属表面防护技术];
学科分类号
080503 ;
摘要
Aluminum films coated on DI steel sheets were prepared by direct current(DC)magnetron sputtering. The influence of the deposition conditions and film thickness on the formability of coated steel sheets was studied. The results of the cupping test and drawing test show that the substrate temperature and thickness of Al films are the key factors that affect Al adhesion and formability of coated steel sheets.Adhesion became worse when the thickness of Al sheets was more than 2μm.And formability was improved remarkably when the substrate temperature was increased to 200℃.
引用
收藏
页码:20 / 23
页数:4
相关论文
共 50 条
  • [21] High conductivity and transparent ZnO:Al films prepared at low temperature by DC and MF magnetron sputtering
    Guillen, C.
    Herrero, J.
    THIN SOLID FILMS, 2006, 515 (02) : 640 - 643
  • [22] Influence of positive substrate bias on the electrical properties of ZnO:Al films prepared by DC magnetron sputtering
    Lim, D. G.
    Kang, G. S.
    Kwon, S. I.
    Park, M. W.
    Kwak, D. J.
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2007, 50 (06) : 1697 - 1700
  • [23] The mechanical, tribological and optical properties of Ti-C:H coatings, prepared by DC magnetron sputtering
    Kulikovsky, V
    Tarasenko, A
    Fendrych, F
    Jastrabik, L
    Chvostova, D
    Franc, F
    Soukup, L
    DIAMOND AND RELATED MATERIALS, 1998, 7 (06) : 774 - 778
  • [24] Investigation of Electrochromic WO3 Nanorods Prepared by DC Reactive Magnetron Sputtering with GLAD Technique
    Chananonnawathorn, C.
    Horprathum, M.
    Eiamchai, P.
    Srichaiyaperk, T.
    Aiempanakit, K.
    Chindaudom, P.
    APPLIED PHYSICS AND MATERIAL APPLICATIONS, 2013, 770 : 136 - +
  • [25] Structural and Optical Properties of Al-Zn-Cu Thin Films Prepared by DC-Magnetron Sputtering at Different Sputtering Powers
    Dejam, Laya
    Elahi, S. Mohammad
    MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 2013, 577 (01) : 59 - 70
  • [26] Electronic properties of n-ZnO(Al)/p-Si heterojunction prepared by dc magnetron sputtering
    Quemener, V.
    Vines, L.
    Monakhov, E. V.
    Svensson, B. G.
    THIN SOLID FILMS, 2011, 519 (17) : 5763 - 5766
  • [28] Effect of annealing temperature on properties of ZnO:Al thin films prepared by pulsed DC reactive magnetron sputtering
    Liu, Chaoying
    Xu, Zhiwei
    Zhang, Yanfang
    Fu, Jing
    Zang, Shuguang
    Zuo, Yan
    MATERIALS LETTERS, 2015, 139 : 279 - 283
  • [29] Fabrication and its characteristics of hard coating Ti-Al-N system prepared by DC magnetron sputtering
    Zhou Xuyang
    Wu Aimin
    Qu Wenchao
    Jiang Xin
    RARE METALS, 2012, 31 (02) : 178 - 182
  • [30] Effect of buffer thickness on the properties of Al-doped ZnO thin films prepared by DC magnetron sputtering
    Ke Zhu
    Haibin Wang
    Faxin Xiao
    Feng Xu
    Journal of Materials Science: Materials in Electronics, 2017, 28 : 7302 - 7306