EFFECT OF W ON MECHANICAL PROPERTIES OF 12%Cr HEAT-RESISTANT STEEL

被引:0
|
作者
FUJITA Toshio
机构
[1] The University of Tokyo Tokyo
[2] Japan
关键词
12%Cr-W-V-Nb steel; martensitic heat-resistant steel; Laves phase; precipitation behavior;
D O I
暂无
中图分类号
学科分类号
摘要
The effect of W on mechanical properties of 12% Cr-W-V-Nb heat resistant steel at hightemperatures and room temperature is reported.The experimental results indicated that if theW content was about 2.2—3.0 wt-%,there was no obviously change of R.T.tensile strength,but impact toughness decreased with the rise of W content.On the other hand,the increase ofW content enhanced the short time stress rupture strength,but did not for the long time one.The increase of W have two effects on the precipitation behavior,promoting Laves formationof type FeW,increasing the precipitated phase amount and speeding up the coarsening pro-cess of precipitated phase at high temperatures.The effect of W on the mechanical propertiesis closely associated with precipitation behaviors.When the rupture life is short,there has noenough time to coarsen the precipitated phases,so the increase of precipitated phases results instrengthening effect,i.e.the W increases the high temperature strength.After prolonged expo-sure,the evident coarsening took plaee,that decreased the effect of precipitation.
引用
收藏
页码:95 / 100
页数:6
相关论文
共 50 条
  • [41] Effect of Cerium on Solidification Structure and Eutectic Precipitates in Electroslag Remelted Cr-W-Co Martensitic Heat-Resistant Steel
    Zhao, Yu
    Wang, Hui
    Liu, Jun
    Zhu, Xin
    Zhang, Huai
    Shi, Chengbin
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2024, 55 (06): : 4915 - 4928
  • [42] Effect of Nb on Austenite Grain Growth in 10Cr-3Co-2W Martensitic Heat-Resistant Steel
    Park, Bong Cheon
    Kim, Sung-Dae
    Park, Ihho
    Shin, Jong-Ho
    Jang, Jae Hoon
    Kang, Namhyun
    METALS AND MATERIALS INTERNATIONAL, 2024, 30 (12) : 3311 - 3319
  • [43] Effect of residual and microalloying elements on the properties and weldability of 12Kh1MF heat-resistant steel
    Kamenskaya, N.I.
    Kulikova, L.V.
    Thermal Engineering (English translation of Teploenergetika), 1993, 40 (11):
  • [44] Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of P91 Heat-Resistant Steel Coating on Mild Steel
    Wang, Rui
    Zhu, Longlong
    Liu, Huiling
    Du, Jiaqing
    Liu, Hui
    Hu, Lei
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 34 (5) : 4105 - 4115
  • [45] Structure and physical and mechanical properties of heat-resistant austenitic steel implanted with nitrogen ions
    Kukareko V.A.
    Byeli A.V.
    Taran I.I.
    Inorganic Materials: Applied Research, 2014, 5 (04) : 357 - 363
  • [46] Austenite Grain Growth and Its Effect on the Mechanical Properties of Super304H Heat-Resistant Steel
    Wu, Yue
    Liu, Run
    Zhan, Xianqiang
    Liu, Junjian
    Wang, Wanli
    Wang, Yan
    Tang, Wenming
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (05) : 2228 - 2236
  • [47] Effect of heat treatment on microstructure and mechanical properties of 2Cr12NiMoWV steel
    Hebei Univ of Science and Technology, Shijiazhuang, China
    Kang T'ieh/Iron and Steel (Peking), 1998, 33 (11): : 50 - 53
  • [48] Effect of tempering temperature on the precipitation behavior of B-containing carbides and mechanical properties of heat-resistant steel
    Ma, Yulin
    Li, Zhuang
    Kuang, Chengyang
    Zhang, Xupeng
    Zhang, Junjia
    Zhang, Jun
    Wang, Zifu
    MATERIALS TODAY COMMUNICATIONS, 2024, 38
  • [49] Comparative study on microstructure and mechanical properties of a novel nano-composite strengthening heat-resistant steel and two typical heat-resistant steels
    Huang, Jiazhen
    Wang, Jianyong
    Yang, Lijing
    Du, Wenwen
    Wu, Minghua
    Zhang, Qingke
    Song, Zhenlun
    MATERIALS TODAY COMMUNICATIONS, 2023, 36
  • [50] Microstructure and mechanical properties of 9Cr martensitic heat-resistant steel fabricated by wire and arc additive manufacture technology
    Gao, Chuang
    Chen, Xizhang
    Su, Chuanchu
    Singh, R. Arvind
    Jayalakshmi, S.
    MATERIALS EXPRESS, 2019, 9 (02) : 179 - 184