EFFECT OF W ON MECHANICAL PROPERTIES OF 12%Cr HEAT-RESISTANT STEEL

被引:0
|
作者
FUJITA Toshio
机构
[1] The University of Tokyo Tokyo
[2] Japan
关键词
12%Cr-W-V-Nb steel; martensitic heat-resistant steel; Laves phase; precipitation behavior;
D O I
暂无
中图分类号
学科分类号
摘要
The effect of W on mechanical properties of 12% Cr-W-V-Nb heat resistant steel at hightemperatures and room temperature is reported.The experimental results indicated that if theW content was about 2.2—3.0 wt-%,there was no obviously change of R.T.tensile strength,but impact toughness decreased with the rise of W content.On the other hand,the increase ofW content enhanced the short time stress rupture strength,but did not for the long time one.The increase of W have two effects on the precipitation behavior,promoting Laves formationof type FeW,increasing the precipitated phase amount and speeding up the coarsening pro-cess of precipitated phase at high temperatures.The effect of W on the mechanical propertiesis closely associated with precipitation behaviors.When the rupture life is short,there has noenough time to coarsen the precipitated phases,so the increase of precipitated phases results instrengthening effect,i.e.the W increases the high temperature strength.After prolonged expo-sure,the evident coarsening took plaee,that decreased the effect of precipitation.
引用
收藏
页码:95 / 100
页数:6
相关论文
共 50 条
  • [31] Precipitation control by W addition in aged heat-resistant austenitic 22Cr-25Ni steels and its effect on mechanical properties
    Li, Peng
    Jian, Wang
    Fang, Xudong
    Chen, Chao
    Han, Peide
    Li, Yuping
    MATERIALS CHARACTERIZATION, 2022, 186
  • [32] Effect of high-temperature degradation on microstructure evolution and mechanical properties of austenitic heat-resistant steel
    Choi, Jaegu
    Seok, Chang-Sung
    Park, Soo
    Kim, Gayeon
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2019, 8 (02): : 2011 - 2020
  • [33] Microstructures and Mechanical Properties of 12Cr1MoV Heat-resistant Steel Prepared by Controlled Rolling-Relaxation-Online Tempering Technology
    Tan, Fengliang
    Dong, Changfu
    Zhou, Yang
    Wang, Li
    Lin, Qiquan
    Cailiao Daobao/Materials Reports, 2018, 32 : 195 - 199
  • [34] Crystallography of Martensite in Friction-Stir-Welded 12Cr Heat-Resistant Steel
    Peng Hua
    Sergey Mironov
    Yutaka S. Sato
    Hiroyuki Kokawa
    Seung Hwang C. Park
    Satoshi Hirano
    Metallurgical and Materials Transactions A, 2019, 50 : 3158 - 3163
  • [35] The effect of heat treatment on the microstructure and mechanical properties of heat-resistant ferritic-martensitic steel EK-181
    Litovchenko, I. Yu.
    Polekhina, N. A.
    Tyumentsev, A. N.
    Astafurova, E. G.
    Chernov, V. M.
    Lentyeva-Smirnova, M. V.
    JOURNAL OF NUCLEAR MATERIALS, 2014, 455 (1-3) : 665 - 668
  • [36] Effect of Aluminum on Microstructure and Properties of Martensitic Wear-Resistant and Heat-Resistant Steel
    Yufu Sun
    Yezhe Lv
    Liuli Wang
    Jingjie Shen
    Xiangcai Jia
    Jingyu Zhao
    Oxidation of Metals, 2013, 80 : 113 - 124
  • [37] EFFECT OF PROTECTIVE COATINGS ON THE MECHANICAL-PROPERTIES OF HEAT-RESISTANT ALLOYS
    GUZANOV, BN
    SOROKIN, VG
    KOSITSYN, SV
    STRENGTH OF MATERIALS, 1984, 16 (01) : 120 - 124
  • [38] Crystallography of Martensite in Friction-Stir-Welded 12Cr Heat-Resistant Steel
    Hua, Peng
    Mironov, Sergey
    Sato, Y. Utaka S.
    Kokawa, Hiroyuki
    Park, Seung Hwang C.
    Hirano, Satoshi
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (07): : 3158 - 3163
  • [39] Effect of Aluminum on Microstructure and Properties of Martensitic Wear-Resistant and Heat-Resistant Steel
    Sun, Yufu
    Lv, Yezhe
    Wang, Liuli
    Shen, Jingjie
    Jia, Xiangcai
    Zhao, Jingyu
    OXIDATION OF METALS, 2013, 80 (1-2): : 113 - 124
  • [40] Deformation behavior of 9Cr-3W-3Co martensitic heat-resistant steel
    LUO Suzhen
    BaosteelTechnicalResearch, 2020, 14 (04) : 24 - 32