Formation of Inclusion in Ti–Al Killed Low C–Mn Steel

被引：0

作者：

Cheng-wei YANG ^{[1
]}

Xin-hua WANG ^{[2
]}

Tie OU ^{[3
]}

Jiang-hua QI ^{[1
]}

Wan-jun ZHU ^{[1
]}

Jun-fu CHEN ^{[1
]}

Li-ping LIN ^{[1
]}

机构：

[1] Research and Development Center,Wuhan Iron and Steel (Group) Corp.

[2] School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing

[3] Research and Development Center,Wuhan Iron and Steel (Group) Corp., Wuhan 430080, Hubei, China

来源：

Journal of Iron and Steel Research(International) | 2014年 / S1期

关键词：

Ti-killed steel; oxide metallurgy; inclusion;

D O I：

暂无

中图分类号：

TG142.71 [不锈钢、耐酸钢];

学科分类号：

080502 ;

摘要：

The formation of inclusion in Ti–Al complex deoxidized C–Mn steel was investigated. When Al content in steel is very low([Al]=0.0005%), for 0.003%<[Ti]<0.007%, the inclusion is the Al2O3–SiO2–MnO–TiOx composite inclusion; for [Ti]≥0.009%, the inclusion is TiOx in the steel. When [Ti]=0.005%, [Al]<0.001%, the inclusion is the Al2O3–SiO2–MnO–TiOx composite inclusion; while [Al]>0.006%, inclusions would be pure Al2O3. The experimental results agree with the thermodynamics conclusions.

引用

页码：87 / 90

页数：4

共 50 条

[31] Effect of Molten Steel Composition on Inclusion Modification by Calcium Treatment in Al-Killed Tinplate Steel
Li, Xiaoao
Wang, Nan
Chen, Min
Du, Zhiqiang
ISIJ INTERNATIONAL, 2023, 63 (02) : 303 - 312
[32] Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Ti-Stabilized 18Cr Stainless Steel
Li, Jingyu
Cheng, Guoguang
Ruan, Qiang
Pan, Jixiang
Chen, Xingrun
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2019, 50 (06): : 2769 - 2779
[33] Influence of Reoxidation in Tundish on Inclusion for Ca-Treated Al-Killed Steel
Yang, Guangwei
Wang, Xinhua
Huang, Fuxiang
Wang, Wanjun
Yin, Yuqun
Tang, Chunxia
STEEL RESEARCH INTERNATIONAL, 2014, 85 (05) : 784 - 792
[34] Characteristics of Nozzle Clogging and Evolution of Oxide Inclusion for Al-Killed Ti-Stabilized 18Cr Stainless Steel
Jingyu Li
Guoguang Cheng
Qiang Ruan
Jixiang Pan
Xingrun Chen
Metallurgical and Materials Transactions B, 2019, 50 : 2769 - 2779
[35] Influence of Silicon in Low Density Fe-C-Mn-Al Steel
Yoon-Uk Heo
You-Young Song
Seong-Jun Park
H. K. D. H. Bhadeshia
Dong-Woo Suh
Metallurgical and Materials Transactions A, 2012, 43 : 1731 - 1735
[36] Influence of Silicon in Low Density Fe-C-Mn-Al Steel
Heo, Yoon-Uk
Song, You-Young
Park, Seong-Jun
Bhadeshia, H. K. D. H.
Suh, Dong-Woo
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (06): : 1731 - 1735
[37] Effects of Ti and Al on the formation of intragranular ferrites in the ultra-low-oxygen Si-Mn weld metals of low-carbon steel
Homma, Ryuichi
Kadoi, Kota
Inoue, Hiroshige
MATERIALS TODAY COMMUNICATIONS, 2021, 29
[38] Inclusion Agglomeration on Ultra-Low C Liquid Steel Surface: Roles of Ti in the Steel and the Oxygen Potential
Dong-Hyun Kim
Jea-Bok Choi
Hae-Mi Hong
Yong-Min Cho
Young-Joon Park
Min-Ho Song
Youn-Bae Kang
Metals and Materials International, 2022, 28 : 3106 - 3119
[39] Inclusion Agglomeration on Ultra-Low C Liquid Steel Surface: Roles of Ti in the Steel and the Oxygen Potential
Kim, Dong-Hyun
Choi, Jea-Bok
Hong, Hae-Mi
Cho, Yong-Min
Park, Young-Joon
Song, Min-Ho
Kang, Youn-Bae
METALS AND MATERIALS INTERNATIONAL, 2022, 28 (12) : 3106 - 3119
[40] Effect of the Timing Addition of Ferrosilicon with Al and Ca Impurities on Inclusion Formation in Al-Killed Automobile Gear Steel SCr420H
Sun, Meng
Jiang, Zhouhua
Li, Yang
Li, Huabing
Chen, Changyong
Ma, Shuai
Ji, Yongshuai
Wang, Ju
Ma, Yanshuo
STEEL RESEARCH INTERNATIONAL, 2023, 94 (01)

← 1 2 3 4 5 →