Formation of Inclusion in Ti–Al Killed Low C–Mn Steel

被引：0

作者：

Cheng-wei YANG ^{[1
]}

Xin-hua WANG ^{[2
]}

Tie OU ^{[3
]}

Jiang-hua QI ^{[1
]}

Wan-jun ZHU ^{[1
]}

Jun-fu CHEN ^{[1
]}

Li-ping LIN ^{[1
]}

机构：

[1] Research and Development Center,Wuhan Iron and Steel (Group) Corp.

[2] School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing

[3] Research and Development Center,Wuhan Iron and Steel (Group) Corp., Wuhan 430080, Hubei, China

来源：

Journal of Iron and Steel Research(International) | 2014年 / S1期

关键词：

Ti-killed steel; oxide metallurgy; inclusion;

D O I：

暂无

中图分类号：

TG142.71 [不锈钢、耐酸钢];

学科分类号：

080502 ;

摘要：

The formation of inclusion in Ti–Al complex deoxidized C–Mn steel was investigated. When Al content in steel is very low([Al]=0.0005%), for 0.003%<[Ti]<0.007%, the inclusion is the Al2O3–SiO2–MnO–TiOx composite inclusion; for [Ti]≥0.009%, the inclusion is TiOx in the steel. When [Ti]=0.005%, [Al]<0.001%, the inclusion is the Al2O3–SiO2–MnO–TiOx composite inclusion; while [Al]>0.006%, inclusions would be pure Al2O3. The experimental results agree with the thermodynamics conclusions.

引用

页码：87 / 90

页数：4

共 50 条

[1] Formation of Inclusion in Ti-Al Killed Low C-Mn Steel
Yang, Cheng-wei
Wang, Xin-hua
Ou, Tie
Qi, Jiang-hua
Zhu, Wan-jun
Chen, Jun-fu
Lin, Li-ping
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2014, 21 : 87 - 90
[2] Non-metallic inclusion and intragranular nucleation of ferrite in Ti-killed C-Mn steel
Byun, JS
Shim, JH
Cho, YW
Lee, DN
ACTA MATERIALIA, 2003, 51 (06) : 1593 - 1606
[3] MECHANISMS OF INCLUSION FORMATION IN AL-TI-SI-MN DEOXIDIZED STEEL WELD METALS
KLUKEN, AO
GRONG, O
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (08): : 1335 - 1349
[4] Influence of Mn on microstructural evolution in Ti-killed C-Mn steel
Byun, JS
Shim, JH
Cho, YW
SCRIPTA MATERIALIA, 2003, 48 (04) : 449 - 454
[5] Thermodynamic Evaluation of Inclusion Formation during Cooling and Solidification of Low Carbon Si-Mn Killed Steel
Choudhary, Shiv Kumar
MATERIALS AND MANUFACTURING PROCESSES, 2012, 27 (09) : 925 - 929
[6] Influence of Mg/Ti complex addition on evolution and thermodynamics of the inclusion in Al-killed steel
Zhang, Tongsheng
Li, Yandong
Mu, Haoyuan
Liu, Chengjun
Jiang, Maofa
METALLURGICAL RESEARCH & TECHNOLOGY, 2017, 114 (03)
[7] Structure of a low carbon Al-killed/Ti-added steel
Mendoza, R
Camacho, J
Lugo, G
Lopez, C
Herrera, L
Reyes, J
Gonalez, C
JuarezIslas, JA
ISIJ INTERNATIONAL, 1997, 37 (02) : 176 - 180
[8] Inclusion characteristics and acicular ferrite formation in 1.8%Ni low carbon Al-killed steel with MgO nanoparticles addition
Sun, Meng
Li, Yang
Jiang, Zhou-Hua
Ma, Shuai
Ji, Yong-Shuai
Mao, Yun-Qie
Chen, Chang-Yong
Wang, Yu-Cheng
Yang, Rui
Journal of Iron and Steel Research International, 31 (12): : 3007 - 3021
[9] Microstructures and Formation of Tundish Clogging Deposits in Ti-Alloyed Al-Killed Steel
Enno Zinngrebe
James Small
Sieger van der Laan
Albert Westendorp
Metallurgical and Materials Transactions B, 2020, 51 : 2321 - 2338
[10] Control of Ca addition for improved cleanness of low C, Al killed steel
Abdelaziz, S.
Megahed, G.
El-Mahallawi, I.
Ahmed, H.
IRONMAKING & STEELMAKING, 2009, 36 (06) : 432 - 441

← 1 2 3 4 5 →