Experimental investigation on the anti-detonation performance of composite structure containing foam geopolymer backfill material

被引:0
|
作者
Zhou, Hang [1 ]
Li, Hujun [1 ]
Wang, Zhen [1 ]
Yan, Dongming [2 ]
Wang, Wenxin [2 ,3 ]
Zhang, Guokai [4 ]
Cheng, Zirui [4 ]
Sun, Song [5 ]
Wang, Mingyang [5 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Mech Engn, Nanjing 210094, Peoples R China
[2] Zhejiang Univ, Coll Civil Engn & Architecture, Hangzhou 310058, Peoples R China
[3] Zhejiang Univ, Inst Composites Sci Innovat, Sch Mat Sci & Engn, Hangzhou 310027, Peoples R China
[4] Nanjing Univ Sci & Technol, Sch Safety Sci & Engn, Sch Emergency Management, Nanjing 210094, Peoples R China
[5] Army Engn Univ PLA, State Key Lab Disaster Prevent & Mitigat Explos &, Nanjing 210014, Peoples R China
来源
DEFENCE TECHNOLOGY | 2025年 / 43卷
关键词
Explosion load; Composite structure; Geopolymer foam; Energy absorption; STRESS WAVE-PROPAGATION; DYNAMIC-RESPONSE; SANDWICH PANELS; CONCRETE SLAB; BLAST; DAMAGE; SUBJECT;
D O I
10.1016/j.dt.2024.08.011
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts, reducing the vibration effect on the structure. Explosion tests were conducted using several composite structure models, including a concrete lining structure (CLS) without foam geopolymer and six foam geopolymer composite structures (FGCS) with different backfill parameters, to study the dynamic response and wave dissipation mechanisms of FGCS under explosive loading. Pressure, strain, and vibration responses at different locations were synchronously tested. The damage modes and dynamic responses of different models were compared, and how wave elimination and energy absorption efficiencies were affected by foam geopolymer backfill parameters was analyzed. The results showed that the foam geopolymer absorbed and dissipated the impact energy through continuous compressive deformation under high strain rates and dynamic loading, reducing the strain in the liner structure by 52% and increasing the pressure attenuation rate by 28%. Additionally, the foam geopolymer backfill reduced structural vibration and liner deformation, with the FGCS structure showing 35% less displacement and 70% less acceleration compared to the CLS. The FGCS model with thicker, less dense foam geopolymer backfill, having more pores and higher porosity, demonstrated better compression and energy absorption under dynamic impact, increasing stress wave attenuation efficiency. By analyzing the stress wave propagation and the compression characteristics of the porous medium, it was concluded that the stress transfer ratio of FGCS-r-579 was 77% lower than that of CLS, and the transmitted wave energy was 90% lower. The results of this study provide a scientific basis for optimizing underground composite structure interlayer parameters. (c) 2024 China Ordnance Society. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).
引用
收藏
页码:304 / 318
页数:15
相关论文
共 50 条
  • [41] EXPERIMENTAL INVESTIGATION OF THE STRUCTURAL PERFORMANCE OF CONCRETE CONTAINING CELLULOSE FIBRES AND THE ANTI-CORROSIVE EFFECT OF GREEN CORROSION INHIBITORS
    Ramshankar, Pushpanathan
    Ganeshan, Pushpanathan
    Raja, Kandhasamy
    Nagarajaganesh, Balasubramanian
    CIVIL AND ENVIRONMENTAL ENGINEERING REPORTS, 2024, 34 (02) : 22 - 44
  • [42] Experimental investigation and performance of timber-concrete composite floor structure with non-metallic connection system
    Dankova, J.
    Mec, P.
    Safrata, J.
    ENGINEERING STRUCTURES, 2019, 193 : 207 - 218
  • [43] Theoretical and experimental study on sound absorption performance of Al2O3-polyurethane foam and microperforated plate composite structure
    Yuan, Binxia
    Hou, Weiguang
    Liu, Jianben
    Zhou, Bing
    Zhu, Rui
    Cao, Lan
    JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL, 2023, 42 (02) : 890 - 897
  • [44] Performance improvement of building-integrated photovoltaic panels using a composite phase change material-carbon foam heat sink: An experimental study
    El-Nagar, Dina H.
    Emam, Mohamed
    El-Betar, A. A.
    Nada, Sameh A.
    JOURNAL OF BUILDING ENGINEERING, 2024, 91
  • [45] INVESTIGATION ON THE ANTI-PENETRATION PERFORMANCE OF UD - A THREE-DIMENSIONAL ORTHOGONAL WOVEN FABRIC COMPOSITE REINFORCED STRUCTURE
    Shen, Chaoming
    Chen, Yang
    Liu, Lei
    Zhang, Zexin
    Tang, Baijian
    Li, Fushan
    Qian, Denghui
    JOURNAL OF THEORETICAL AND APPLIED MECHANICS, 2023, 61 (04) : 701 - 714
  • [46] Experimental and numerical investigation on thermal performance enhancement of phase change material embedding porous metal structure with cubic cell
    Hu, Xusheng
    Gong, Xiaolu
    APPLIED THERMAL ENGINEERING, 2020, 175 (175)
  • [47] Experimental investigation on the anti-penetration performance of UHMWPE sandwich composite armor under high mass cylindrical projectile impact
    Zheng Y.
    Li M.
    Li Y.-Q.
    Hou H.-L.
    Liu Y.-J.
    Chuan Bo Li Xue/Journal of Ship Mechanics, 2022, 26 (03): : 426 - 436
  • [48] Experimental and numerical investigation of the anti-debonding performance for novel CFRP-steel tube composite member under tension
    Liu, Z. Q.
    Luo, B.
    Wang, Q.
    Feng, B.
    JOURNAL OF BUILDING ENGINEERING, 2021, 35
  • [49] Investigation of physico-mechanical, thermal properties and solar thermoregulation performance of shape-stable attapulgite based composite phase change material in foam concrete
    Gencel, Osman
    Ustaoglu, Abid
    Benli, Ahmet
    Hekimoglu, Gokhan
    Sari, Ahmet
    Erdogmus, Ertugrul
    Sutcu, Mucahit
    Kaplan, Gokhan
    Bayraktar, Oguzhan Yavuz
    SOLAR ENERGY, 2022, 236 : 51 - 62
  • [50] Experimental investigation on the thermal performance of a heat sink filled with porous metal fiber sintered felt/paraffin composite phase change material
    Wang, Hongfei
    Wang, Fanxu
    Li, Zongtao
    Tang, Yong
    Yu, Binhai
    Yuan, Wei
    APPLIED ENERGY, 2016, 176 : 221 - 232