Experimental investigation on the anti-detonation performance of composite structure containing foam geopolymer backfill material

被引:0
|
作者
Zhou, Hang [1 ]
Li, Hujun [1 ]
Wang, Zhen [1 ]
Yan, Dongming [2 ]
Wang, Wenxin [2 ,3 ]
Zhang, Guokai [4 ]
Cheng, Zirui [4 ]
Sun, Song [5 ]
Wang, Mingyang [5 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Mech Engn, Nanjing 210094, Peoples R China
[2] Zhejiang Univ, Coll Civil Engn & Architecture, Hangzhou 310058, Peoples R China
[3] Zhejiang Univ, Inst Composites Sci Innovat, Sch Mat Sci & Engn, Hangzhou 310027, Peoples R China
[4] Nanjing Univ Sci & Technol, Sch Safety Sci & Engn, Sch Emergency Management, Nanjing 210094, Peoples R China
[5] Army Engn Univ PLA, State Key Lab Disaster Prevent & Mitigat Explos &, Nanjing 210014, Peoples R China
来源
DEFENCE TECHNOLOGY | 2025年 / 43卷
关键词
Explosion load; Composite structure; Geopolymer foam; Energy absorption; STRESS WAVE-PROPAGATION; DYNAMIC-RESPONSE; SANDWICH PANELS; CONCRETE SLAB; BLAST; DAMAGE; SUBJECT;
D O I
10.1016/j.dt.2024.08.011
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts, reducing the vibration effect on the structure. Explosion tests were conducted using several composite structure models, including a concrete lining structure (CLS) without foam geopolymer and six foam geopolymer composite structures (FGCS) with different backfill parameters, to study the dynamic response and wave dissipation mechanisms of FGCS under explosive loading. Pressure, strain, and vibration responses at different locations were synchronously tested. The damage modes and dynamic responses of different models were compared, and how wave elimination and energy absorption efficiencies were affected by foam geopolymer backfill parameters was analyzed. The results showed that the foam geopolymer absorbed and dissipated the impact energy through continuous compressive deformation under high strain rates and dynamic loading, reducing the strain in the liner structure by 52% and increasing the pressure attenuation rate by 28%. Additionally, the foam geopolymer backfill reduced structural vibration and liner deformation, with the FGCS structure showing 35% less displacement and 70% less acceleration compared to the CLS. The FGCS model with thicker, less dense foam geopolymer backfill, having more pores and higher porosity, demonstrated better compression and energy absorption under dynamic impact, increasing stress wave attenuation efficiency. By analyzing the stress wave propagation and the compression characteristics of the porous medium, it was concluded that the stress transfer ratio of FGCS-r-579 was 77% lower than that of CLS, and the transmitted wave energy was 90% lower. The results of this study provide a scientific basis for optimizing underground composite structure interlayer parameters. (c) 2024 China Ordnance Society. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).
引用
收藏
页码:304 / 318
页数:15
相关论文
共 50 条
  • [21] Temperature control performance of high thermal conductivity metal foam/paraffin composite phase change material: An experimental study
    Yu, X.K.
    Tao, Y.B.
    He, Y.
    Lv, Z.C.
    Journal of Energy Storage, 2022, 46
  • [22] Melting performance of a composite bio-based phase change material: An experimental evaluation of copper foam pore size
    Sheikh Y.
    Orhan M.F.
    Azmeer A.
    International Journal of Thermofluids, 2022, 16
  • [23] Experimental and numerical investigation of a hybrid battery thermal management system based on copper foam-paraffin composite phase material and
    Zhao, Yanqi
    Zou, Boyang
    Ding, Jianning
    Ding, Yulong
    APPLIED THERMAL ENGINEERING, 2023, 218
  • [24] Experimental investigation into the performance of novel SrCl2-based composite material for thermochemical energy storage
    Clark, Ruby-Jean
    Farid, Mohammed
    JOURNAL OF ENERGY STORAGE, 2021, 36
  • [25] Experimental investigation of variable fin length on melting performance in a rectangular enclosure containing phase change material
    Temel, Umit Nazli
    Kilinc, Ferhat
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2023, 142
  • [26] Role of Composite Phase Change Material on the Thermal Performance of a Latent Heat Storage System: Experimental Investigation
    Jasim Abdulateef
    Ahmed F.Hasan
    Mustafa S.Mahdi
    JournalofHarbinInstituteofTechnology(NewSeries), 2020, 27 (01) : 44 - 51
  • [27] Experimental investigation on wear properties with micro-structure behavior of arecanut reinforced polymer composite material
    Raja, S. Joseph Irudaya
    Sivaganesan, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 682 - 689
  • [28] Experimental Investigation on the Grouting Performance of Foam-CNT Composite Grouts in Vertical Inclined Fractures Under Flowing Condition
    Liu, Yaohui
    Lv, Fang
    Ouyang, Zebin
    Wang, Tao
    LITHOSPHERE, 2024, 2024 (01)
  • [29] Year-round energy and exergy performance investigation of a photovoltaic panel coupled with metal foam/phase change material composite
    Sharaf, Mohamed
    Yousef, Mohamed S.
    Huzayyin, A. S.
    RENEWABLE ENERGY, 2022, 189 : 777 - 789
  • [30] Experimental Investigation of Deep Beams Containing High-Performance Fiber-Reinforced Cementitious Composite
    Rezaei, Mohammad
    Ranjbar Karkanaki, Asadollah
    Zabihi-Samani, Masoud
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING, 2022, 46 (01) : 55 - 65