Experimental investigation on the anti-detonation performance of composite structure containing foam geopolymer backfill material

被引:0
|
作者
Zhou, Hang [1 ]
Li, Hujun [1 ]
Wang, Zhen [1 ]
Yan, Dongming [2 ]
Wang, Wenxin [2 ,3 ]
Zhang, Guokai [4 ]
Cheng, Zirui [4 ]
Sun, Song [5 ]
Wang, Mingyang [5 ]
机构
[1] Nanjing Univ Sci & Technol, Sch Mech Engn, Nanjing 210094, Peoples R China
[2] Zhejiang Univ, Coll Civil Engn & Architecture, Hangzhou 310058, Peoples R China
[3] Zhejiang Univ, Inst Composites Sci Innovat, Sch Mat Sci & Engn, Hangzhou 310027, Peoples R China
[4] Nanjing Univ Sci & Technol, Sch Safety Sci & Engn, Sch Emergency Management, Nanjing 210094, Peoples R China
[5] Army Engn Univ PLA, State Key Lab Disaster Prevent & Mitigat Explos &, Nanjing 210014, Peoples R China
来源
DEFENCE TECHNOLOGY | 2025年 / 43卷
关键词
Explosion load; Composite structure; Geopolymer foam; Energy absorption; STRESS WAVE-PROPAGATION; DYNAMIC-RESPONSE; SANDWICH PANELS; CONCRETE SLAB; BLAST; DAMAGE; SUBJECT;
D O I
10.1016/j.dt.2024.08.011
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The compression and energy absorption properties of foam geopolymers increase stress wave attenuation under explosion impacts, reducing the vibration effect on the structure. Explosion tests were conducted using several composite structure models, including a concrete lining structure (CLS) without foam geopolymer and six foam geopolymer composite structures (FGCS) with different backfill parameters, to study the dynamic response and wave dissipation mechanisms of FGCS under explosive loading. Pressure, strain, and vibration responses at different locations were synchronously tested. The damage modes and dynamic responses of different models were compared, and how wave elimination and energy absorption efficiencies were affected by foam geopolymer backfill parameters was analyzed. The results showed that the foam geopolymer absorbed and dissipated the impact energy through continuous compressive deformation under high strain rates and dynamic loading, reducing the strain in the liner structure by 52% and increasing the pressure attenuation rate by 28%. Additionally, the foam geopolymer backfill reduced structural vibration and liner deformation, with the FGCS structure showing 35% less displacement and 70% less acceleration compared to the CLS. The FGCS model with thicker, less dense foam geopolymer backfill, having more pores and higher porosity, demonstrated better compression and energy absorption under dynamic impact, increasing stress wave attenuation efficiency. By analyzing the stress wave propagation and the compression characteristics of the porous medium, it was concluded that the stress transfer ratio of FGCS-r-579 was 77% lower than that of CLS, and the transmitted wave energy was 90% lower. The results of this study provide a scientific basis for optimizing underground composite structure interlayer parameters. (c) 2024 China Ordnance Society. Publishing services by Elsevier B.V. on behalf of KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/ licenses/by-nc-nd/4.0/).
引用
收藏
页码:304 / 318
页数:15
相关论文
共 50 条
  • [1] Experimental investigation on the anti-detonation performance of composite structure containing foam geopolymer backfill material
    Hang Zhou
    Hujun Li
    Zhen Wang
    Dongming Yan
    Wenxin Wang
    Guokai Zhang
    Zirui Cheng
    Song Sun
    Mingyang Wang
    Defence Technology, 2025, 43 (01) : 304 - 318
  • [2] Performance optimization and characterization of loess-slag-based geopolymer composite: A new sustainable green material for backfill
    Lv, Haoyan
    Chen, Yanlong
    Xie, Qihang
    Wu, Peng
    Chen, Yuanguang
    Gu, Jun
    Wu, Haoshuai
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 354
  • [3] Experimental investigation and numerical analysis on the performance of flowable soil as feasible backfill material for railway bridge approach
    Tri Ho Minh Le
    Lee, Tack-Woo
    Seo, Jung-Woo
    Park, Dae-Wook
    TRANSPORTATION GEOTECHNICS, 2021, 28
  • [4] Experimental Investigation on Heat Transfer Performance of Copper Foam-Paraffin Composite with Fins
    Xia, Liang
    Dai, Hua
    Ma, Wei
    2015 4TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENTAL PROTECTION (ICEEP 2015), 2015, : 3623 - 3628
  • [5] Experimental investigation of the effect of copper foam pore structure on the thermal performance of phase change material in different centrifugal force fields
    Zhang, Nan
    Liu, Hao
    Xia, Qiuyi
    Zhang, Zhaoli
    Tong, Zixiang
    Du, Yanxia
    Yuan, Yanping
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2023, 206
  • [6] Experimental investigation on copper foam/hydrated salt composite phase change material for thermal energy storage
    Li, T. X.
    Wu, D. L.
    He, F.
    Wang, R. Z.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 115 : 148 - 157
  • [7] Experimental investigation on thermal performance of battery using composite phase change material
    Powar, Kanhaiya
    Patil, Sharad
    MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2025, 8 (01)
  • [8] Experimental investigation on convective heat transfer of heat sink based on paraffin/copper foam composite material
    Ferfera, Ratiba Sabrina
    Madani, Brahim
    Kouidri, Ahmed
    JOURNAL OF ENERGY STORAGE, 2025, 119
  • [9] Experimental investigation on vibration transmissibility of the conical shell with composite material honeycomb structure
    Wang, Wei-Yuan
    Wang, Cong
    Wei, Ying-Jie
    Zou, Zhen-Zhu
    Gongcheng Lixue/Engineering Mechanics, 2007, 24 (07): : 1 - 5
  • [10] Experimental Investigation of a Single Chrial Nano-Structure Made of a Composite Material
    Wozniak, P.
    Hoeflich, K.
    Fritsch, S.
    Christiansen, S.
    Banzer, P.
    Leuchs, G.
    2013 CONFERENCE ON LASERS AND ELECTRO-OPTICS EUROPE AND INTERNATIONAL QUANTUM ELECTRONICS CONFERENCE (CLEO EUROPE/IQEC), 2013,