The influence of selective laser melting (SLM) parameters on physical, and mechanical properties of AlSi10Mg cylindrical specimen

被引：0
|
作者：
Mohan, R. Raj [1 ]
Krishnan, Navaneetha S. [1 ]
Sakthivel, B. [1 ]
Ramya, J. [2 ]
Sindhumathi, R. [1 ]
机构：
[1] SASTRA Univ, Bajaj Engn Skills Training BEST Ctr, Thanjavur 613401, Tamil Nadu, India
[2] SASTRA Univ, Sch Comp, Thanjavur 613401, Tamil Nadu, India
来源：
PHYSICA SCRIPTA | 2025年 / 100卷 / 02期
关键词：
WEAR BEHAVIOR; OPTIMIZATION; SURFACE; ALLOY; MICROSTRUCTURE; DENSIFICATION; POROSITY; QUALITY;
D O I：
10.1088/1402-4896/ada46c
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
AlSi10Mg cylindrical specimens were fabricated using the Laser-based Powder Bed Fusion (L-PBF) process, focusing on optimizing scanning speed, hatch spacing, and layer height through the box-behnken design (BBD). The study aimed to minimize surface roughness and maximize relative density. The analysis involved ANOVA, regression analysis, and composite desirability, revealing that hatch spacing and layer height significantly influence relative density and surface roughness. Under optimized conditions (scanning speed: 500 mm s-1, hatch spacing: 100 microns, layer height: 30 microns), the L-PBF specimen achieved a 96.70% relative density, 2.07 microns surface roughness (Ra), and an average microhardness of 124.9 HV0.5 (longitudinal) and 120.5 HV0.5 (transverse).
引用
收藏
页数：13
相关论文
共 50 条
  • [31] The Effect of Selective Laser Melting Process Parameters on the Microstructure and Mechanical Properties of A16061 and AlSi10Mg Alloys
    Maamoun, Ahmed H.
    Xue, Yi F.
    Elbestawi, Mohamed A.
    Veldhuis, Stephen C.
    MATERIALS, 2019, 12 (01)
  • [32] Influence of laser beam profile on the selective laser melting process of AlSi10Mg
    Wischeropp, Tim Marten
    Tarhini, Hussein
    Emmelmann, Claus
    JOURNAL OF LASER APPLICATIONS, 2020, 32 (02)
  • [33] Microstructure and Tensile Properties of AlSi10Mg Alloy Manufactured by Multi-Laser Beam Selective Laser Melting (SLM)
    Li, Zhonghua
    Kuai, Zezhou
    Bai, Peikang
    Nie, Yunfei
    Fu, Guang
    Liu, Wenpeng
    Yang, Shuai
    METALS, 2019, 9 (12)
  • [34] Laser welding of AlSi10Mg aluminium-based alloy produced by Selective Laser Melting (SLM)
    Makikangas, Jarmo
    Rautio, Timo
    Mustakangas, Aappo
    Mantyjarvi, Kari
    17TH NORDIC LASER MATERIALS PROCESSING CONFERENCE (NOLAMP17), 2019, 36 : 88 - 94
  • [35] Research on Microstructure and Properties of AlSi10Mg Fabricated by Selective Laser Melting
    Pan, Wei
    Ye, Zhanggen
    Zhang, Yongzhong
    Liu, Yantao
    Liang, Bo
    Zhai, Ziyu
    MATERIALS, 2022, 15 (07)
  • [36] Rapid Solidification: Selective Laser Melting of AlSi10Mg
    Tang, Ming
    Pistorius, P. Chris
    Narra, Sneha
    Beuth, Jack L.
    JOM, 2016, 68 (03) : 960 - 966
  • [37] Causes of Defects in Selective Laser Melting of AlSi10Mg
    Yao, Shuguang
    Dong, Yunhui
    Li, Xianglong
    Xie, Minhan
    Zhongguo Jiguang/Chinese Journal of Lasers, 2024, 51 (16):
  • [38] PROPERTIES AND MICROSTRUCTURE OF AlSi10Mg SAMPLES OBTAINED BY SELECTIVE LASER MELTING
    Babaytsev, A., V
    Orekhov, A. A.
    Rabinskiy, L. N.
    NANOSCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL, 2020, 11 (03) : 213 - 222
  • [39] Causes of Defects in Selective Laser Melting of AlSi10Mg
    Yao, Shuguang
    Dong, Yunhui
    Li, Xianglong
    Xie, Minhan
    CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG, 2024, 51 (16):
  • [40] Influence of Ni Contents on Microstructure and Mechanical Performance of AlSi10Mg Alloy by Selective Laser Melting
    Wang, Hui
    He, Like
    Zhang, Qingyong
    Yuan, Yiqing
    MATERIALS, 2023, 16 (13)
12345