Numerical analysis of temperature profile and weld dimensions in laser+GMAW hybrid welding of aluminum alloy T-joint

被引：0
|
作者：
胥国祥 [1 ]
武传松 [2 ]
秦国梁 [2 ]
王旭友 [3 ]
机构：
[1] Key Laboratory of Advanced Welding Technology of Jiangsu Province,Jiangsu University of Science and Technology
[2] Institute for Materials Joining,Shandong University
[3] Harbin Welding
来源：
China Welding | 2013年 / 22卷 / 03期
关键词：
D O I：
暂无
中图分类号：
TG457.14 [铝];
学科分类号：
摘要：
The temperature fields in the transient state and weld dimensions in laser + gas metal arc welding(GMAW) hybrid welding of aluminum alloy T-jointfor different welding conditions were calculated using the developed heat source model,and the effect of welding speed on them was analyzed.The results show that the temperature field for the first weld pass only shows the feature of GMAW and the one for the second weld pass has the characteristics of both laser welding and GMAW.Welding speed can affect greatly weld dimensions and temperature distribution.When welding speed reaches 3.5 m/min,the fusion zones of two weld passes are separated and the maximum peak temperature of thermal cycle on the workpiece surface decreases largely.
引用
收藏
页码：51 / 55
页数：5
相关论文
共 50 条
  • [41] Numerical analysis of the effect of energy distribution on weld width during oscillating laser welding of aluminum alloy
    Ai, Yuewei
    Yan, Yachao
    Han, Shibo
    JOURNAL OF LASER APPLICATIONS, 2023, 35 (04)
  • [42] Effect of the welding direction on the microstructural characterization in fiber laser-GMAW hybrid welding of 5083 aluminum alloy
    Huang, Lijin
    Wu, Dongsheng
    Hua, Xueming
    Liu, Shichao
    Jiang, Zhao
    Li, Fang
    Wang, Huan
    Shj, Shaojian
    JOURNAL OF MANUFACTURING PROCESSES, 2018, 31 : 514 - 522
  • [43] Comparative study on welding characteristics of laser-additional current hybrid welded T-joint of aluminium and titanium alloy
    Zhang, Xinge
    Li, Liqun
    Chen, Yanbin
    Zhu, Xiaocui
    Li, Yansheng
    Guo, Xinjian
    2015 7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND ELECTRONICS ENGINEERING (ICMEE 2015), 2015, 31
  • [44] Numerical Analysis of Residual Stresses in a T-Joint Fillet Weld Using a Submodeling Technique
    Peric, Mato
    Tonkovic, Zdenko
    Maksimovic, Katarina S.
    Stamenkovic, Dragi
    FME TRANSACTIONS, 2019, 47 (01): : 183 - 189
  • [45] Numerical analysis on the deformation controlling of T-joint LBW with auxiliary heat source for high strength aluminum alloy
    Dong, Bizhe
    Yang, Wuxiong
    Wu, Shikai
    Xiao, Rongshi
    Wang, Qiming
    Zhongguo Jiguang/Chinese Journal of Lasers, 2015, 42 (08):
  • [46] Effect of Laser Power on Hybrid Laser-Gas Metal Arc Welding (GMAW) of a 6061 Aluminum Alloy
    Zhou, Huiling
    Fu, Fanglian
    Dai, Zhixin
    Qiao, Yanxin
    Chen, Jian
    Yang, Lanlan
    Liu, Wen
    JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 2020, 77 (11) : 991 - 996
  • [47] Effect of Laser Power on Hybrid Laser-Gas Metal Arc Welding (GMAW) of a 6061 Aluminum Alloy
    Huiling Zhou
    Fanglian Fu
    Zhixin Dai
    Yanxin Qiao
    Jian Chen
    Lanlan Yang
    Wen Liu
    Journal of the Korean Physical Society, 2020, 77 : 991 - 996
  • [48] Dual-beam laser welding of T-joint of aluminum-lithium alloy 2060-T8/2099-T83
    Yang, Wuxiong
    Zhang, Xinyi
    Xiao, Rongshi
    Zhongguo Jiguang/Chinese Journal of Lasers, 2013, 40 (07):
  • [49] Study on the weld joint of Mg alloy and steel by laser-GTA hybrid welding
    Liu, L. M.
    Zhao, X.
    MATERIALS CHARACTERIZATION, 2008, 59 (09) : 1279 - 1284
  • [50] Numerical simulation of weld formation in laser + GMAW hybrid welding II. Combined volumetric distribution mode of hybrid welding heat source
    Xu, Guoxiang
    Wu, Chuansong
    Qin, Guoliang
    Wang, Xuyou
    Lin, Shangyang
    Jinshu Xuebao/Acta Metallurgica Sinica, 2008, 44 (06): : 641 - 646
12345