Numerical analysis of temperature profile and weld dimensions in laser+GMAW hybrid welding of aluminum alloy T-joint

被引：0
|
作者：
胥国祥 [1 ]
武传松 [2 ]
秦国梁 [2 ]
王旭友 [3 ]
机构：
[1] Key Laboratory of Advanced Welding Technology of Jiangsu Province,Jiangsu University of Science and Technology
[2] Institute for Materials Joining,Shandong University
[3] Harbin Welding
来源：
China Welding | 2013年 / 22卷 / 03期
关键词：
D O I：
暂无
中图分类号：
TG457.14 [铝];
学科分类号：
摘要：
The temperature fields in the transient state and weld dimensions in laser + gas metal arc welding(GMAW) hybrid welding of aluminum alloy T-jointfor different welding conditions were calculated using the developed heat source model,and the effect of welding speed on them was analyzed.The results show that the temperature field for the first weld pass only shows the feature of GMAW and the one for the second weld pass has the characteristics of both laser welding and GMAW.Welding speed can affect greatly weld dimensions and temperature distribution.When welding speed reaches 3.5 m/min,the fusion zones of two weld passes are separated and the maximum peak temperature of thermal cycle on the workpiece surface decreases largely.
引用
收藏
页码：51 / 55
页数：5
相关论文
共 50 条
  • [31] Prediction of Weld Forming Size for Laser Welded Titanium Alloy T-joint Based on Regression Analysis
    Wen Xue
    Wang Honghui
    Fan Dehua
    Lei Zhenglong
    Bi Siyuan
    Guo Hengtong
    LASER & OPTOELECTRONICS PROGRESS, 2022, 59 (19)
  • [32] NUMERICAL MODELING OF SINGLE-SIDED LASER BEAM WELDING T-JOINT
    Saternus, Zbigniew
    Piekarska, Wieslawa
    27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2018), 2018, : 843 - 848
  • [33] NUMERICAL ANALYSIS OF FLUID FLOW IN LASER plus GMAW HYBRID WELDING
    Xu Guoxiang
    Zhang Weiwei
    Liu Peng
    Du Baoshuai
    ACTA METALLURGICA SINICA, 2015, 51 (06) : 713 - 723
  • [34] Effects of sealing run welding with defocused laser beam on the quality of T-joint fillet weld
    Unt, Anna
    Poutiainen, Ilkka
    Salminen, Antti
    8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014), 2014, 56 : 497 - 506
  • [35] Numerical simulation and test for influence of laser arc hybrid welding sequence on 304 stainless steel T-joint
    Gui X.
    Zhang Y.
    You D.
    Gao X.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2021, 42 (12): : 34 - 39
  • [36] Numerical analysis of the influence on high humidity in a T-joint fillet weld for high strength low alloy steel
    Chen, Songping
    Li, Yongxian
    Xie, Yanji
    MATERIAL SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY II, 2014, 651-653 : 56 - +
  • [37] Accurate characterization of weld appearance induced by T-joint laser stake-welding by integration of ANFIS approach and numerical simulation
    Wu, Di
    Chen, Jieshi
    Liu, Hongbing
    Zhang, Peilei
    Yu, Zhishui
    JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, 2019, 37 (06) : 8589 - 8601
  • [38] Analysis of microstructure and mechanical properties of the aluminum alloy T-joint welded by stationary shoulder friction stir welding
    Hao Y.
    Ma J.
    Bi H.
    Li C.
    Wang G.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (07): : 48 - 54
  • [39] AHP-based welding position decision and optimization for angular distortion and weld collapse control in T-joint multipass GMAW
    He, Yinshui
    Yu, Zhuohua
    Deng, Yibo
    Deng, Junpei
    Cai, Run
    Wang, Zijie
    Tu, Wenfeng
    Zhong, Weisheng
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 121 : 246 - 259
  • [40] Parameter Optimization of the Laser T-joint Welding of Aluminium Alloy with Low Carbon Steel Using Numerical and Statistical Methods
    Huang, W-H.
    Long, J-Q.
    Xiang, J-W.
    LASERS IN ENGINEERING, 2017, 38 (3-6) : 167 - 183
12345