Possibilities of Improvement of Geometrical and Dimensional Accuracy in Forming High-strength Cold-rolled Sheet Metal.

被引：0
|
作者：
Kahl, Klaus-Werner
Schiefenbusch, Juergen
机构：
来源：
Blech, Rohre, Profile | 1983年 / 30卷 / 02期
关键词：
D O I：
暂无
中图分类号：
TG [金属学与金属工艺];
学科分类号：
0805 ;
摘要：
The paper shows the effect of the deformation behavior of high-strength cold-rolled sheet metal made of micro- and phosphorus-alloyed steels as well as a dual-phase steel on the geometrical and dimensional accuracy of structural sheet metal parts. Because of a higher yield point, the occurs frequently distinct spring-back resilience which, however, can be compensated for by suitable means. A simple and efficient approach to achieving an improved geometrical and dimensional accuracy consists in pinpointed stress control in the deformation zone.
引用
收藏
页码：39 / 43
相关论文
共 50 条
  • [31] A STUDY ON THE BAKE-HARDENABILITY OF COLD-ROLLED HIGH-STRENGTH STEEL SHEETS
    KOKUBO, I
    NOMURA, S
    MIYAHARA, M
    KAMENO, K
    KAWAMOTO, K
    JOURNAL OF METALS, 1981, 33 (09): : A52 - A52
  • [32] Ongoing control of the transverse thickness fluctuation of cold-rolled high-strength strip
    Kunitsyn G.A.
    Golubchik E.M.
    Smirnov P.N.
    Steel in Translation, 2009, 39 (10) : 920 - 924
  • [33] METALLURGICAL FACTORS AFFECTING THE FORMABILITY OF COLD-ROLLED HIGH-STRENGTH STEEL SHEETS
    IRIE, T
    SATOH, S
    HASHIGUCHI, K
    TAKAHASHI, I
    HASHIMOTO, O
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1981, 21 (11) : 793 - 801
  • [34] MAG welding of high-strength, cold-rolled, dual-phase steels
    Nilsson, Tony
    Svetsaren, a Welding Review, 53 (03): : 10 - 13
  • [35] Experimental study on high-cycle fatigue performance of LQ550 cold-rolled high-strength steel sheet
    Wang Y.
    Li Y.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2024, 45 (04): : 189 - 197
  • [36] DEVELOPMENT OF RQ-CAL TYPE HIGH-STRENGTH COLD-ROLLED SHEET STEEL WITH EXTRA HIGH DUCTILITY .1. EFFECT OF CONTINUOUS ANNEALING TYPE ON STRENGTH AND DUCTILITY OF COLD-ROLLED DUAL PHASE STEEL
    SHIRASAWA, H
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S513 - S513
  • [37] DEVELOPMENT OF 100 KGF/MM2 GRADE COLD-ROLLED HIGH-STRENGTH SHEET STEEL WITH SUPERIOR DUCTILITY
    KOYAMA, K
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1369 - 1369
  • [38] PRODUCTION OF 980 MPA (100 KGF/MM2) GRADE COLD-ROLLED HIGH-STRENGTH STEEL SHEET WITH HIGH DUCTILITY
    TANAKA, Y
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S633 - S633
  • [39] DEVELOPMENT OF TS 100 KGF/MM2 GRADE COLD-ROLLED, HIGH-STRENGTH STEEL SHEET WITH HIGH DUCTILITY.
    Miyahara, Masayuki
    Shirawasa, Hidenori
    Tanaka, Yoshiki
    Baba, Yuzo
    R and D: Research and Development Kobe Steel Engineering Reports, 1985, 35 (04): : 92 - 96
  • [40] Flatness evolution of cold-rolled high-strength steel strips during quenching process
    Zhang, Qing-dong
    Lin, Xiao
    Cao, Qiang
    Sun, Chao-yang
    Zhang, Li-Yuan
    Zhang, Bo-yang
    ADVANCES IN MECHANICAL ENGINEERING, 2017, 9 (12):
12345