Study of injection molding: (4th report. Analysis of pressure build-up during the packing and the cooling stage in the injection molding)

被引：0
|
作者：
Naka, Hiroyuki
Ichiyanagi, Takashi
Kenmochi, Kazuei
机构：
来源：
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B | 1989年 / 55卷 / 514期
关键词：
Flow of Fluids--Compressible - Mathematical Techniques--Numerical Analysis - Pressure Measurement;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The fluid motion within the mold cavity during the packing and the cooling stages is studied. To evaluate the pressure history in the postfilling process of injection molding, an analytical approach is chosen. The fluid is considered as Newtonian, and its compressiblity is explained by the Spencer-Gilmore equation. Also, the cooling effect during the whole process is considered. The results of the analysis are compared with the experimental pressure profile in the model die. The analytical pressure profile is in fairly good agreement with the experiment for different mold thickness parameters. The pressure drop by the cooling effect is also explained quantitatively.
引用
收藏
页码：1686 / 1691
相关论文
共 48 条
  • [31] 3D study of cooling system effect on the heat transfer during polymer injection molding
    Hassan, Hamdy
    Regnier, Nicolas
    Le Bot, Cedric
    Defaye, Guy
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010, 49 (01) : 161 - 169
  • [32] An explicit integral solution for pressure build-up during CO2 injection into infinite saline aquifers
    Wu, Haiqing
    Bai, Bing
    Li, Xiaochun
    Gao, Shuai
    Liu, Mingze
    Wang, Lei
    GREENHOUSE GASES-SCIENCE AND TECHNOLOGY, 2016, 6 (05): : 633 - 647
  • [33] Investigation of caprock integrity due to pressure build-up during high-volume injection into the Utsira formation
    Gasda, Sarah E.
    Wangen, Magnus
    Bjornara, Tore I.
    Elenius, Maria T.
    13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13, 2017, 114 : 3157 - 3166
  • [34] PRESSURE TRANSFER DURING THE INJECTION-MOLDING PROCESS THROUGH IMPROVED CHANGE-OVER TO FOLLOW-UP PRESSURE
    RIES, H
    STILLHARD, B
    KUNSTSTOFFE-GERMAN PLASTICS, 1987, 77 (12): : 1232 - 1236
  • [35] Visualization analysis of the filling behavior of melt into microscale V-grooves during the filling stage of injection molding
    Han, X.
    Yokoi, H.
    POLYMER ENGINEERING AND SCIENCE, 2006, 46 (11): : 1590 - 1597
  • [36] Cycle-to-cycle and within-cycle adaptive control of nozzle pressure during packing-holding for thermoplastic injection molding
    Yang, Y
    Gao, FR
    POLYMER ENGINEERING AND SCIENCE, 1999, 39 (10): : 2042 - 2063
  • [37] STUDY OF THE INJECTION MOLDING (2ND REPORT, ANALYSIS OF THE PARTIAL THERMAL SHRINKAGE IN THE RIB STRUCTURES).
    Naka, Hiroyuki
    Ichiyanagi, Takashi
    Kenmochi, Kazuei
    1600, (53):
  • [38] An advanced analytical solution for pressure build-up during CO2 injection into infinite saline aquifers: The role of compressibility
    Wu Haiqing
    Bai Bing
    Li Xiaochun
    ADVANCES IN WATER RESOURCES, 2018, 112 : 95 - 105
  • [39] High-Throughput in Situ Characterization of Polymer Crystallization under an Intense Flow, High Pressure, and Cooling Gradient during Injection Molding
    Yin, Jin
    Deng, Lu-Feng
    Ma, Guo-Qi
    Wu, Feng-Yang
    Xu, Jia-Zhuang
    Gao, Xueqin
    Bian, Fenggang
    Lei, Jun
    Zhong, Gan-Ji
    Li, Zhong-Ming
    MACROMOLECULES, 2023, 56 (11) : 4111 - 4122
  • [40] Experimental parametric study of flow-induced fiber washout during high-injection-pressure resin transfer molding
    Bodaghi, Masoud
    Simacek, Pavel
    Correia, Nuno
    Advani, Suresh G.
    POLYMER COMPOSITES, 2020, 41 (03) : 1053 - 1065
12345