Study of injection molding: (4th report. Analysis of pressure build-up during the packing and the cooling stage in the injection molding)

被引：0
|
作者：
Naka, Hiroyuki
Ichiyanagi, Takashi
Kenmochi, Kazuei
机构：
来源：
Nippon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B | 1989年 / 55卷 / 514期
关键词：
Flow of Fluids--Compressible - Mathematical Techniques--Numerical Analysis - Pressure Measurement;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The fluid motion within the mold cavity during the packing and the cooling stages is studied. To evaluate the pressure history in the postfilling process of injection molding, an analytical approach is chosen. The fluid is considered as Newtonian, and its compressiblity is explained by the Spencer-Gilmore equation. Also, the cooling effect during the whole process is considered. The results of the analysis are compared with the experimental pressure profile in the model die. The analytical pressure profile is in fairly good agreement with the experiment for different mold thickness parameters. The pressure drop by the cooling effect is also explained quantitatively.
引用
收藏
页码：1686 / 1691
相关论文
共 48 条
  • [21] Analysis of Cavity Pressure for Packing Conditions in Injection Molding of a Deep Depth Product
    Kim, Dong Woo
    Kang, Mina
    Kim, Hyeok
    Lyu, Min-Young
    POLYMER-KOREA, 2012, 36 (06) : 685 - 692
  • [22] ANALYSIS OF TEMPERATURE EFFECTS DURING COOLING IN POWDER INJECTION-MOLDING
    FOX, RT
    LEE, DY
    INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1994, 30 (02): : 221 - 229
  • [23] Rapid Control of old Temperature during Injection Molding Process: Effect of Packing Pressure
    Liparoti, Sara
    Sorrentino, Andrea
    Titomanlio, Giuseppe
    POLYMER PROCESSING WITH RESULTING MORPHOLOGY AND PROPERTIES: FEET IN THE PRESENT AND EYES AT THE FUTURE, 2015, 1695
  • [24] Measurement and analysis of cavity pressure and melt filling capacity during injection molding
    Wu Hong-wu
    Zhang Shao-dan
    Qu Jin-ping
    Xu Hai-hang
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2007, 46 (02) : 123 - 127
  • [25] Analytical study of thin-wall injection molding: Filling and cooling analysis.
    Cha, S
    Lai, FS
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 831 - 836
  • [26] Numerical simulation study on mitigation of the pressure build-up in the geological formation during injection of CO2
    Fujita, Claudia
    Hiratsuka, Yusuke
    Yamamoto, Hajime
    Nakajima, Takahiro
    Xue, Ziqiu
    13TH INTERNATIONAL CONFERENCE ON GREENHOUSE GAS CONTROL TECHNOLOGIES, GHGT-13, 2017, 114 : 4765 - 4774
  • [27] Fast cavity surface temperature evolution in injection molding: control of cooling stage and final morphology analysis
    Liparoti, Sara
    Sorrentino, Andrea
    Titomanlio, Giuseppe
    RSC ADVANCES, 2016, 6 (101) : 99274 - 99281
  • [28] Self-optimization of the V/P switchover and packing pressure for online viscosity compensation during injection molding
    Xu, Yuxuan
    Xie, Pengcheng
    Fu, Nanhong
    Jiao, Xiaolong
    Wang, Jinling
    Liu, Gang
    Dou, Xiyu
    Zha, Yan
    Dang, Kaifang
    Yang, Weimin
    POLYMER ENGINEERING AND SCIENCE, 2022, 62 (04): : 1114 - 1123
  • [29] Effect of Cooling Agent on Temperature Profile During Molding Injection: Case Study for Polylactic Composites
    Isopescu, Raluca
    Postelnicescu, Paula
    MATERIALE PLASTICE, 2021, 58 (01) : 228 - 236
  • [30] Flow Regime Analysis of the Pressure Build-Up during CO2 Injection in Saturated Porous Rock Formations
    Sarris, Ernestos
    Gravanis, Elias
    ENERGIES, 2019, 12 (15)
12345