Effect of urethane based bonding agent on the cure characteristics and mechanical properties of styrene butadiene rubber - whole tyre reclaim - short nylon fiber composite

被引:0
|
作者
Sreeja, T.D. [1 ]
Kutty, S.K.N. [1 ]
机构
[1] Dept. Polymer Sci. Rubber Technol., Cochin Univ. of Sci. and Technol., Cochin 682 022, India
关键词
Agents - Bonding - Curing - Nylon polymers - Plastic filaments - Polyethylene glycols - Rubber - Tensile strength - Torque - Wear resistance;
D O I
10.1177/147776060201800405
中图分类号
学科分类号
摘要
The cure characteristics and mechanical properties of short nylon fiber-styrene butadiene rubber/whole tyre reclaim (SBR/WTR) composites with and without an interfacial bonding agent based on 4,4 diphenyl methane diisocyanate and polyethylene glycol (MDI/PEG) have been studied. An 80:40 blend of SBR/WTR reinforced with 20 phr of short nylon fiber has been selected and the MDI/PEG ratio has been changed from 0.67:1 to 2:1. The minimum and maximum torques increased with isocyanate concentration. The scorch time and cure time showed an initial reduction. The cure rate showed an initial improvement. Tensile strength, tear strength and abrasion resistance increased with MDI/PEG ratio, these values were higher in longitudinal direction. Resilience and compression set increased with isocyanate concentration.
引用
收藏
页码:283 / 295
相关论文
共 50 条
  • [41] Effect of silane coupling agent on the structure and mechanical properties of nano-dispersed clay filled styrene butadiene rubber
    He, Shaojian
    Xue, Yang
    Lin, Jun
    Zhang, Liqun
    Du, Xiaoze
    Chen, Lin
    POLYMER COMPOSITES, 2016, 37 (03) : 890 - 896
  • [42] Effect of Short Carbon Fiber Reinforcement on Mechanical Properties of 3D-Printed Acrylonitrile Butadiene Styrene
    Lobov, Evgeniy
    Dobrydneva, Anastasia
    Vindokurov, Ilia
    Tashkinov, Mikhail
    POLYMERS, 2023, 15 (09)
  • [43] Curing Characteristics and Mechanical Properties of Wasted Crumb Rubber-Styrene Butadiene Rubber Binary Blends Using Bio Based Softener
    Rahmaniar
    Bondan, Aprillena Tornadez
    Susanto, Tri
    14TH JOINT CONFERENCE ON CHEMISTRY 2019, 2020, 2237
  • [44] Mechanical properties, Payne effect, and Mullins effect of thermoplastic vulcanizates based on high-impact polystyrene and styrene-butadiene rubber compatibilized by styrene-butadiene-styrene block copolymer
    Wang, Zhaobo
    Li, Shuai
    Wei, Dongya
    Zhao, Jian
    JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2015, 28 (08) : 1154 - 1172
  • [45] Effect of 1-phenyl-2,4-dithiobiuret as secondary accelerator on cure characteristics and vulcanisate properties of natural rubber-styrene/butadiene rubber blends
    Aprem, AS
    Joseph, K
    Thomas, S
    Barkoula, NM
    Karger-Kocsis, J
    PLASTICS RUBBER AND COMPOSITES, 2003, 32 (01) : 3 - 10
  • [46] Effect of Foaming Temperature and Blowing Agent Content on Cure Characteristics, Mechanical and Morphological Properties of Natural Rubber Foams
    Pechurai, Worawan
    Muansupan, Tatsanee
    Seawlee, Petcharat
    ADVANCES IN RUBBER, 2014, 844 : 454 - 457
  • [47] Effect of Bamboo Charcoal Powder on the Curing Characteristics, Mechanical Properties, and Thermal Properties of Styrene-Butadiene Rubber with Bamboo Charcoal Powder
    Meng, Xianghai
    Zhang, Yihe
    Lu, Jinbo
    Zhang, Zhilei
    Liu, Leipeng
    Chu, Paul K.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 130 (06) : 4534 - 4541
  • [49] EFFECT OF AMMONIUM DERIVATIVES OF OLIGOAMIDEPHOSPHATES ON THE VULCANIZATION CHARACTERISTICS AND MECHANICAL-PROPERTIES OF SOME RUBBER COMPOUNDS .2. STYRENE-BUTADIENE RUBBER COMPOUNDS
    VLADKOVA, TG
    ARNAUDOVA, RV
    POLYMER INTERNATIONAL, 1995, 38 (02) : 141 - 145
  • [50] Effect of nano-scaled styrene butadiene rubber based nucleating agent on the thermal, crystallization and physical properties of isotactic polypropylene
    Petchwattana, Nawadon
    Covavisaruch, Sirijutaratana
    Sripanya, Panjapong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 582 : 190 - 195