Effect of urethane based bonding agent on the cure characteristics and mechanical properties of styrene butadiene rubber - whole tyre reclaim - short nylon fiber composite

被引:0
|
作者
Sreeja, T.D. [1 ]
Kutty, S.K.N. [1 ]
机构
[1] Dept. Polymer Sci. Rubber Technol., Cochin Univ. of Sci. and Technol., Cochin 682 022, India
关键词
Agents - Bonding - Curing - Nylon polymers - Plastic filaments - Polyethylene glycols - Rubber - Tensile strength - Torque - Wear resistance;
D O I
10.1177/147776060201800405
中图分类号
学科分类号
摘要
The cure characteristics and mechanical properties of short nylon fiber-styrene butadiene rubber/whole tyre reclaim (SBR/WTR) composites with and without an interfacial bonding agent based on 4,4 diphenyl methane diisocyanate and polyethylene glycol (MDI/PEG) have been studied. An 80:40 blend of SBR/WTR reinforced with 20 phr of short nylon fiber has been selected and the MDI/PEG ratio has been changed from 0.67:1 to 2:1. The minimum and maximum torques increased with isocyanate concentration. The scorch time and cure time showed an initial reduction. The cure rate showed an initial improvement. Tensile strength, tear strength and abrasion resistance increased with MDI/PEG ratio, these values were higher in longitudinal direction. Resilience and compression set increased with isocyanate concentration.
引用
收藏
页码:283 / 295
相关论文
共 50 条
  • [21] Effect of addition of reclaimed rubber on curing characteristics and mechanical properties of styrene-butadiene rubber
    Formela, Krzysztof
    Cysewska, Magdalena
    Januszewicz, Katarzyna
    PRZEMYSL CHEMICZNY, 2014, 93 (05): : 666 - 671
  • [22] Cure characteristics and mechanical properties of carbon black filled styrene-butadiene rubber and epoxidized natural rubber blends
    Nasir, M.
    Choo, C.H.
    1600, (25):
  • [23] EFFECT OF VULCANIZATION TEMPERATURE ON THE CURE CHARACTERISTICS AND VULCANIZATE PROPERTIES OF NATURAL-RUBBER AND STYRENE-BUTADIENE RUBBER
    KURIAN, T
    GEORGE, KE
    FRANCIS, DJ
    ANGEWANDTE MAKROMOLEKULARE CHEMIE, 1988, 162 : 123 - 134
  • [24] Effects of Cure Characteristics, Mechanical and Morphological Properties of Styrene Butadiene Rubber/Recycled Chloroprene Rubber (SBR/CRr) Blends
    Azmi, Ahmad Azrem
    Zulkepli, Nik Noriman
    Nordin, Muhammad Razif
    Abdullah, Mohd Mustafa Al Bakri
    Sandu, Ion
    Salleh, Mohd Arif Anuar Mohd
    Hanafi, Ismail
    MATERIALE PLASTICE, 2013, 50 (03) : 175 - 178
  • [25] Mechanical, Morphological and Rheological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites
    Soltani, S.
    Naderi, G.
    Mohseniyan, Sh.
    FIBERS AND POLYMERS, 2014, 15 (11) : 2360 - 2369
  • [26] Mechanical, morphological and rheological properties of short nylon fiber reinforced acrylonitrile-butadiene rubber composites
    S. Soltani
    G. Naderi
    Sh. Mohseniyan
    Fibers and Polymers, 2014, 15 : 2360 - 2369
  • [27] Effect of latex reclaim on physico-mechanical and thermal properties of carbon black filled natural rubber/butadiene rubber composite
    Nambiathodi, Vaishak
    Varghese, Siby
    Varghese, Neethu
    JOURNAL OF RUBBER RESEARCH, 2021, 24 (04) : 641 - 650
  • [28] Effect of latex reclaim on physico-mechanical and thermal properties of carbon black filled natural rubber/butadiene rubber composite
    Vaishak Nambiathodi
    Siby Varghese
    Neethu Varghese
    Journal of Rubber Research, 2021, 24 : 641 - 650
  • [29] The Effect of Electron Beam (EB) Irradiation in Presence of TMPTA on Cure Characteristics and Mechanical Properties of Styrene Butadiene Rubber/Recycled Acrylonitrile-Butadiene Rubber (SBR/NBRr) Blends
    Noriman, N. Z.
    Ismail, H.
    Ratnam, C. T.
    Rashid, A. A.
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (03) : 228 - 236
  • [30] Effect of silane coupling agent on cure characteristics and mechanical properties of chloroprene rubber/reclaimed rubber blend
    Nelson, PA
    Kutty, SKN
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2004, 43 (04) : 1141 - 1156