Effect of urethane based bonding agent on the cure characteristics and mechanical properties of styrene butadiene rubber - whole tyre reclaim - short nylon fiber composite

被引：0

作者：

Sreeja, T.D. ^{[1
]}

Kutty, S.K.N. ^{[1
]}

机构：

[1] Dept. Polymer Sci. Rubber Technol., Cochin Univ. of Sci. and Technol., Cochin 682 022, India

来源：

Progress in Rubber, Plastics and Recycling Technology | 2002年 / 18卷 / 04期

关键词：

Agents - Bonding - Curing - Nylon polymers - Plastic filaments - Polyethylene glycols - Rubber - Tensile strength - Torque - Wear resistance;

D O I：

10.1177/147776060201800405

中图分类号：

学科分类号：

摘要：

The cure characteristics and mechanical properties of short nylon fiber-styrene butadiene rubber/whole tyre reclaim (SBR/WTR) composites with and without an interfacial bonding agent based on 4,4 diphenyl methane diisocyanate and polyethylene glycol (MDI/PEG) have been studied. An 80:40 blend of SBR/WTR reinforced with 20 phr of short nylon fiber has been selected and the MDI/PEG ratio has been changed from 0.67:1 to 2:1. The minimum and maximum torques increased with isocyanate concentration. The scorch time and cure time showed an initial reduction. The cure rate showed an initial improvement. Tensile strength, tear strength and abrasion resistance increased with MDI/PEG ratio, these values were higher in longitudinal direction. Resilience and compression set increased with isocyanate concentration.

引用

页码：283 / 295

共 50 条

[1] Effect of urethane based bonding agent on the cure characteristics and mechanical properties of natural rubber/whole tyre reclaim-short nylon fiber composite
Sreeja, TD
Kutty, SKN
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2002, 41 (01) : 77 - 89
[2] Effect of an epoxy-based bonding agent on the cure characteristics and mechanical properties of short-nylon-fiber-reinforced acrylonitrile-butadiene rubber composites
Seema, A.
Kutty, S.K.N.
Journal of Applied Polymer Science, 2006, 99 (02): : 532 - 539
[3] Effect of an epoxy-based bonding agent on the cure characteristics and mechanical properties of short-nylon-fiber-reinforced acrylonitrile-butadiene rubber composites
Seema, A
Kutty, SKN
JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 99 (02) : 532 - 539
[4] Cure characteristics and mechanical properties of short nylon-6 fiber neoprene rubber composite containing epoxy resin as bonding agent
Seema, A
Kutty, SKN
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2005, 44 (06) : 1139 - 1158
[5] Hybrid Composite Based on Nanosilica, Nylon 6 Short Fibre, and Styrene Butadiene Rubber - a Study on the Effect of Fillers and Bonding Agent
Mathew, Leny
Kutty, Sunil K. N.
PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY, 2010, 26 (01) : 1 - 20
[6] Cure characteristics and mechanical properties of natural rubber - Short nylon fiber composites
Sreeja, TD
Kutty, SKN
JOURNAL OF ELASTOMERS AND PLASTICS, 2001, 33 (03): : 225 - 238
[7] Cure characteristics and mechanical properties of styrene-butadiene rubber/acrylonitrile butadiene rubber
Rahiman, KH
Unnikrishnan, G
Sujith, A
Radhakrishnan, CK
MATERIALS LETTERS, 2005, 59 (06) : 633 - 639
[8] Cure Characteristics and Mechanical Properties of HRH Bonded Nylon-6 Short Fiber-Nanosilica-Acrylonitrile Butadiene Rubber Hybrid Composite
Mathew, Leny
Narayanankutty, Sunil K.
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2009, 48 (01) : 75 - 81
[9] Cure characteristics and mechanical properties of short nylon fiber-reinforced nitrile rubber composites
Rajesh, C
Unnikrishnan, G
Purushothaman, E
Thomas, S
JOURNAL OF APPLIED POLYMER SCIENCE, 2004, 92 (02) : 1023 - 1030
[10] Cure characteristics and mechanical properties of short nylon fiber reinforced natural rubber-reclaimed rubber blends
Sreeja, TD
Kutty, SKN
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2003, 42 (02) : 239 - 252

← 1 2 3 4 5 →