Ultrafine- grained microstructures and mechanical properties of alloy steels

被引：0
|
作者：
MILLER RL
机构：
来源：
| 1600年 / 03期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Specimens with grain sizes in the range 0. 3 to 1. 1 Um were obtained in cold worked manganese and nickel steels by annealing 1 to 4000 hr at temperatures between 450 and 650 C. The expected improvement in yield strength through grain refinement was observed in almost all specimens. Depending on such factors as grain size, austenite stability, and specimen geometry, three types of plastic behavior were observed.
引用
收藏
相关论文
共 50 条
  • [41] Microstructure and mechanical properties of ultrafine-grained Mg-Zn-Ca alloy
    Kulyasova, Olga
    Islamgaliev, Rinat
    Zhao, Yonghao
    Valiev, Ruslan
    6TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (NANOSPD6), 2014, 63
  • [42] Microstructures and mechanical properties of ultrafine grained medium carbon steel processed by HPT at increased temperature.
    Zrnik, J.
    Pippan, R.
    Scheriau, S.
    Kraus, L.
    TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS CHARACTERIZATION, COMPUTATION AND MODELING AND ENERGY, 2010, : 747 - +
  • [43] Effect of thermomechanical treatment on the microstructures and mechanical properties of an ultrafine grained steel using bainite starting microstructure
    Gostariani, Reza
    Kermanpur, Ahmad
    Najafizade, Abbas
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2019, 110 (06) : 517 - 523
  • [44] Microstructures and Mechanical Properties of Ultrafine-grained Binderless Cemented Carbides with Ti(C,N) Particles
    Mori, Yoshihiro
    Takada, Masayuki
    Tsutsumi, Tomohiro
    Terasaka, Sota
    Matsubara, Hideaki
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2024, 71 (09): : 416 - 422
  • [45] The influence of cooling rate on the microstructures and mechanical properties in ultrafine-grained aluminum processed by hot rolling
    Sun, P. L.
    Zhao, Y. H.
    Tseng, T. Y.
    Su, J. R.
    Lavernia, E. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (20): : 5287 - 5294
  • [46] Effect of microstructure on mechanical behavior for eutectoid steel with ultrafine- or fine-grained ferrite plus cementite structure
    Zheng, Chengsi
    Li, Longfei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 688 : 83 - 91
  • [47] Microstructures and Hardness Prediction of an Ultrafine-Grained Al-2024 Alloy
    Chen, Ying
    Tang, Yuanchen
    Zhang, Houan
    Hu, Nan
    Gao, Nong
    Starink, Marco J.
    METALS, 2019, 9 (11)
  • [48] Effect of texture on the mechanical behavior of ultrafine grained magnesium alloy
    Yuan, W.
    Mishra, R. S.
    Carlson, B.
    Mishra, R. K.
    Verma, R.
    Kubic, R.
    SCRIPTA MATERIALIA, 2011, 64 (06) : 580 - 583
  • [49] Combination of dynamic transformation and dynamic recrystallization for realizing ultrafine-grained steels with superior mechanical properties
    Zhao, Lijia
    Park, Nokeun
    Tian, Yanzhong
    Shibata, Akinobu
    Tsuji, Nobuhiro
    SCIENTIFIC REPORTS, 2016, 6
  • [50] Microstructure-mechanical properties correlation in ultrafine grained steels processed by large strain warm deformation
    Murty, S. V. S. Narayana
    Torizuka, Shiro
    ISIJ INTERNATIONAL, 2008, 48 (08) : 1088 - 1095
12345