Ultrafine- grained microstructures and mechanical properties of alloy steels

被引：0
|
作者：
MILLER RL
机构：
来源：
| 1600年 / 03期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Specimens with grain sizes in the range 0. 3 to 1. 1 Um were obtained in cold worked manganese and nickel steels by annealing 1 to 4000 hr at temperatures between 450 and 650 C. The expected improvement in yield strength through grain refinement was observed in almost all specimens. Depending on such factors as grain size, austenite stability, and specimen geometry, three types of plastic behavior were observed.
引用
收藏
相关论文
共 50 条
  • [21] Ultrafine-Grained Two-Phase High-Entropy Alloy Microstructures Obtained via Recrystallization: Mechanical Properties
    Guillot, Ivan
    Tyrman, Muriel
    Perriere, Loic
    Couzinie, Jean-Philippe P.
    Lilensten, Lola
    Prima, Frederic
    Dirras, Guy
    FRONTIERS IN MATERIALS, 2020, 7
  • [22] Ultrafine grained low carbon steels fabricated by equal channel angular pressing: Microstructures and tensile properties
    Shin, DH
    Park, JJ
    Chang, SY
    Lee, YK
    Park, KT
    ISIJ INTERNATIONAL, 2002, 42 (12) : 1490 - 1496
  • [23] The influence of ultrafine-grained structure on the mechanical properties and biocompatibility of austenitic stainless steels
    Rybalchenko, Olga V.
    Anisimova, Natalia Yu.
    Kiselevsky, Mikhail V.
    Belyakov, Andrey N.
    Tokar, Aleksei A.
    Terent'ev, Vladimir F.
    Prosvirnin, Dmitry V.
    Rybalchenko, Georgy V.
    Raab, Georgi I.
    Dobatkin, Sergey V.
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2020, 108 (04) : 1460 - 1468
  • [24] Enhanced Thermal Stability And Mechanical Properties of Ultrafine-Grained Aluminum Alloy
    Islamgaliev, Rinat K.
    Nikitina, Marina A.
    Kamalov, Aidar F.
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION: NANOSPD5, PTS 1 AND 2, 2011, 667-669 : 331 - 336
  • [25] Evolution of mechanical properties of ultrafine grained 1050 alloy annealing with electric current
    Cao, Yiheng
    He, Lizi
    Zhang, Lin
    Zhou, Yizhou
    Wang, Ping
    Cui, Jianzhong
    MATERIALS CHARACTERIZATION, 2016, 113 : 160 - 167
  • [26] The microstructures and tensile mechanical properties of ultrafine grained and coarse grained Al-7Si-0.3Mg alloy rods fabricated from machining chips
    Liang, J. M.
    Zhang, Z.
    Jia, M. T.
    Cao, L.
    Li, C. G.
    Gao, H. Y.
    Wang, J.
    Zhang, D. L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 729 : 29 - 36
  • [27] Crack propagation and mechanical properties of electrodeposited nickel with bimodal microstructures in the nanocrystalline and ultrafine grained regime
    Rathmann, Dominic
    Marx, Michael
    Motz, Christian
    JOURNAL OF MATERIALS RESEARCH, 2017, 32 (24) : 4573 - 4582
  • [28] Crack propagation and mechanical properties of electrodeposited nickel with bimodal microstructures in the nanocrystalline and ultrafine grained regime
    Dominic Rathmann
    Michael Marx
    Christian Motz
    Journal of Materials Research, 2017, 32 : 4573 - 4582
  • [29] MICROSTRUCTURES AND MECHANICAL PROPERTIES OF ULTRAFINE GRAINED Ti-47Al-2Cr (at %) ALLOY PRODUCED USING POWDER COMPACT FORGING
    Nadakuduru, Vijay N.
    Zhang, Deliang
    Cao, Peng
    Gabbittas, Brian
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 1739 - 1744
  • [30] Microstructures and properties of ultrafine grained W-ZrC composites
    Kim, Jae-Hee
    Park, Choongkwon
    Lim, Jaehyuk
    Kang, Shinhoo
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 623 : 282 - 289
12345