INFLUENCE OF DEPOSITION PARAMETERS ON THE PERFORMANCE OF VAPOR DEPOSITED TiN-COATED CEMENTED CARBIDE TOOLS.

被引：0
|
作者：
Naik, Subhash K.
机构：
来源：
Planseeberichte fuer Pulvermetallurgie | 1977年 / 25卷 / 01期
关键词：
PROTECTIVE COATINGS - Vapor Deposition;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of the simultaneous variation of the ratio of feed gases, feed gas flow rate, and partial pressure of TiCl//4 were investigated to evaluate the performance of TiN coated cemented carbide tools in wear tests. Deposition was carried out at 950 to 1100 C. The optimal coating conditions are defined on the basis of the results. In the wear tests performed, the flank wear of coated tools was up to one third lower than that of uncoated tools, and the TiN-coated tools had remarkable crater wear resistance, up to one sixth of that of uncoated tools.
引用
收藏
页码：32 / 43
相关论文
共 50 条
  • [31] The effect of rapid thermal processing (RTP) on TiN coatings deposited by PVD and the steel-turning performance of coated cemented carbide
    Perry, AJ
    Matossian, JN
    Bull, SJ
    Proskurovsky, DI
    Rice-Evans, PC
    Page, TF
    Geist, DE
    Taylor, J
    Vajo, JJ
    Doty, RE
    Rotshtein, V
    Markov, AB
    SURFACE & COATINGS TECHNOLOGY, 1999, 120 : 337 - 342
  • [32] A comparative study on cutting performance of TiN-coated tungsten carbide cutting tool with a cobalt interlayer
    Kwon, DH
    Kang, MC
    Kim, JS
    Ok, JT
    Kim, KH
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6): : 1933 - 1938
  • [33] Influence of deposition temperature on adhesion of diamond coatings on cemented carbide cutting tools
    2000, (21):
  • [34] Experimental design and performance analysis of TiN-coated carbide tool in face milling stainless steel
    Lin, TR
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 127 (01) : 1 - 7
  • [35] INFLUENCE OF COATING THICKNESS ON THE LIFE OF TIN-COATED HIGH-SPEED STEEL CUTTING TOOLS
    POSTI, E
    NIEMINEN, I
    WEAR, 1989, 129 (02) : 273 - 283
  • [36] SILICON-NITRIDE COATING OF CEMENTED CARBIDE CUTTING TOOLS BY CHEMICAL VAPOR-DEPOSITION
    ELKADDAH, N
    CHEN, CH
    JOURNAL OF METALS, 1988, 40 (11): : 74 - 74
  • [37] A comparison in performance of diamond coated cemented carbide cutting tools with and without a boride interlayer
    Tang, W
    Wang, Q
    Wang, S
    Lu, R
    SURFACE & COATINGS TECHNOLOGY, 2002, 153 (2-3): : 298 - 303
  • [38] An electromagnetic coupling treatment for improving the cutting performance of cemented carbide-coated tools
    Sun, Kaien
    Zeng, Bo
    Qin, Yi
    Deng, Chengjun
    Yang, Yi
    Huang, Kunlan
    Wang, Jie
    JOURNAL OF ASIAN CERAMIC SOCIETIES, 2023, 11 (04) : 504 - 516
  • [39] The Effects of Substrate Bias and Edge Proximity on the Mechanical Properties and Machining Performance of TiN-Coated Carbide Inserts
    Krzanowski, James E.
    Veldhuis, Stephen
    Aliotta, Paul
    Foley, Daniel J.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (06) : 1611 - 1618
  • [40] Effects of work materials on cutting performance of diamond-coated cemented carbide tools
    Morita, T
    Banshoya, K
    Tsutsumoto, T
    Murase, Y
    FOREST PRODUCTS JOURNAL, 1998, 48 (05) : 43 - 50
12345