INFLUENCE OF DEPOSITION PARAMETERS ON THE PERFORMANCE OF VAPOR DEPOSITED TiN-COATED CEMENTED CARBIDE TOOLS.

被引：0
|
作者：
Naik, Subhash K.
机构：
来源：
Planseeberichte fuer Pulvermetallurgie | 1977年 / 25卷 / 01期
关键词：
PROTECTIVE COATINGS - Vapor Deposition;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of the simultaneous variation of the ratio of feed gases, feed gas flow rate, and partial pressure of TiCl//4 were investigated to evaluate the performance of TiN coated cemented carbide tools in wear tests. Deposition was carried out at 950 to 1100 C. The optimal coating conditions are defined on the basis of the results. In the wear tests performed, the flank wear of coated tools was up to one third lower than that of uncoated tools, and the TiN-coated tools had remarkable crater wear resistance, up to one sixth of that of uncoated tools.
引用
收藏
页码：32 / 43
相关论文
共 50 条
  • [21] Influence of recoating on the mechanical and tribological performance of TiN-coated HSS
    Bromark, M
    Gahlin, R
    Hedenqvist, P
    Hogmark, S
    Hakansson, G
    Hansson, G
    SURFACE & COATINGS TECHNOLOGY, 1995, 76-77 (1-3): : 481 - 486
  • [22] Study on the Matching of Surface Texture Parameters and Processing Parameters of Coated Cemented Carbide Tools
    Yang, Haochuan
    Yang, Shucai
    Tong, Xin
    COATINGS, 2023, 13 (04)
  • [23] COATING OF CEMENTED CARBIDE CUTTING TOOLS WITH ALUMINA BY CHEMICAL VAPOR-DEPOSITION
    FUNK, R
    SCHACHNER, H
    TRIQUET, C
    KORNMANN, M
    LUX, B
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1976, 123 (02) : 285 - 289
  • [24] Characterization of chemical vapor deposited HfN multilayer coatings on cemented carbide cutting tools
    Staia, Mariana H.
    Bhat, Deepak G.
    Puchi-Cabrera, Eli S.
    Bost, Jack
    WEAR, 2006, 261 (5-6) : 540 - 548
  • [25] Influence of substrate microstructure and surface finish on cracking and delamination response of TiN-coated cemented carbides
    Yang, J.
    Oden, M.
    Johansson-Joesaar, M. P.
    Llanes, L.
    WEAR, 2016, 352-353 : 102 - 111
  • [26] Influence of Magnetron Sputtering Parameters on Surface Properties of TIN-Coated Bearing Steel
    Yan, Nu
    Xiong, Xiaochen
    CURRENT TRENDS IN THE DEVELOPMENT OF INDUSTRY, PTS 1 AND 2, 2013, 785-786 : 970 - 973
  • [27] Advances in deposition of diamond films on cemented carbide and progress of diamond coated cutting tools
    Liu, Xianwen
    Zhang, Hao
    Lin, Guilin
    Wang, Zhaoguo
    Zhang, Junliang
    Shi, Hongyan
    VACUUM, 2023, 217
  • [28] Surface Layer States of Worn Uncoated and TiN-Coated WC/Co-Cemented Carbide Cutting Tools after Dry Plain Turning of Carbon Steel
    Kuemmel, Johannes
    Poser, Katja
    Zanger, Frederik
    Michna, Juergen
    Schulze, Volker
    ADVANCES IN TRIBOLOGY, 2013, 2013
  • [29] The Performance of TiAlSiN Coated Cemented Carbide Tools Enhanced by Inserting Ti Interlayers
    Li, Guodong
    Li, Liuhe
    Han, Mingyue
    Luo, Sida
    Jin, Jie
    Wang, Lei
    Gu, Jiabin
    Miao, Hu
    METALS, 2019, 9 (09)
  • [30] Effects of pretreatment on the performance of diamond-coated cemented carbide cutting tools
    Wang, Q
    Zhang, Q
    Wang, SG
    Yoon, SF
    Ahn, J
    Zhao, BQ
    Tang, WZ
    Miao, JQ
    Lu, FX
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2003, 21 (06): : 1939 - 1942
12345