INFLUENCE OF DEPOSITION PARAMETERS ON THE PERFORMANCE OF VAPOR DEPOSITED TiN-COATED CEMENTED CARBIDE TOOLS.

被引：0
|
作者：
Naik, Subhash K.
机构：
来源：
Planseeberichte fuer Pulvermetallurgie | 1977年 / 25卷 / 01期
关键词：
PROTECTIVE COATINGS - Vapor Deposition;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of the simultaneous variation of the ratio of feed gases, feed gas flow rate, and partial pressure of TiCl//4 were investigated to evaluate the performance of TiN coated cemented carbide tools in wear tests. Deposition was carried out at 950 to 1100 C. The optimal coating conditions are defined on the basis of the results. In the wear tests performed, the flank wear of coated tools was up to one third lower than that of uncoated tools, and the TiN-coated tools had remarkable crater wear resistance, up to one sixth of that of uncoated tools.
引用
收藏
页码：32 / 43
相关论文
共 50 条
  • [1] INFLUENCE OF DEPOSITION PARAMETERS ON PERFORMANCE OF VAPOR-DEPOSITED TIN-COATED CEMENTED CARBIDE TOOLS
    NAIK, SK
    PLANSEEBERICHTE FUR PULVERMETALLURGIE, 1977, 25 (01): : 32 - 43
  • [2] TiN-coated HSS Tools.
    Koenig, Wilfried
    Lung, Dieter
    Droese, Achim
    VDI-Z, 1985, 127 (03): : 49 - 54
  • [3] Corrosion behavior of TiN-coated cutting carbide tools
    Belhamra, Nadjette
    Chala, Abdelouahed
    MAIN GROUP CHEMISTRY, 2014, 13 (01) : 65 - 71
  • [4] PERFORMANCE OF TIN-COATED TOOLS IN WOOD CUTTING
    OSENIUS, S
    KORHONEN, AS
    SULONEN, MS
    SURFACE & COATINGS TECHNOLOGY, 1987, 33 (1-4): : 141 - 151
  • [5] Active wear and failure mechanisms of TiN-coated high speed steel and TiN-coated cemented carbide tools when machining powder metallurgically made stainless steels
    AB Sandvik Steel, Sandviken, Sweden
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1996, 27 A (09): : 2796 - 2808
  • [6] Active wear and failure mechanisms of TiN-coated high speed steel and TiN-coated cemented carbide tools when machining powder metallurgically made stainless steels
    Jiang, LZ
    Hanninen, H
    Paro, J
    Kauppinen, V
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1996, 27 (09): : 2796 - 2808
  • [7] Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning
    Jindal, P.C.
    Santhanam, A.T.
    Schleinkofer, U.
    Shuster, A.F.
    International Journal of Refractory Metals and Hard Materials, 1999, 17 (01): : 163 - 170
  • [8] Performance of PVD TiN, TiCN, and TiAlN coated cemented carbide tools in turning
    Jindal, PC
    Santhanam, AT
    Schleinkofer, U
    Shuster, AF
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 1999, 17 (1-3): : 163 - 170
  • [9] RESEARCH, DEVELOPMENT AND PERFORMANCE OF CEMENTED CARBIDE TOOLS COATED BY PLASMA-ACTIVATED CHEMICAL VAPOR-DEPOSITION
    KONIG, U
    TABERSKY, R
    VANDENBERG, H
    SURFACE & COATINGS TECHNOLOGY, 1991, 50 (01): : 57 - 62
  • [10] POSSIBILITIES AND LIMITATIONS FOR THE APPLICATION OF CVD-COATED CEMENTED CARBIDE TOOLS AND STEEL TOOLS.
    Schintlmeister, W.
    Metallwerk Plansee GmbH, Reutte
    Kanz, J.
    Wallgram, W.
    International Journal of Refractory Metals and Hard Materials, 1983, 2 (01) : 41 - 43
12345