Automatic Plunger Cooling for Glass Presses.

被引：0
|
作者：
Lindner, Walter
机构：
来源：
| 1978年 / 51卷 / 12期
关键词：
D O I：
暂无
中图分类号：
TQ17 [硅酸盐工业];
学科分类号：
0805 ; 080502 ;
摘要：
The importance of mold temperature on surface quality of glass products is evaluated with particular emphasis on the dipping plunger. The usual method of cooling plungers with fan air or sometimes also with compressed air has some important disadvantages: very high energy cost, loud noise from the cooling nozzles, permanent installation of the nozzles, inability to control the machine and manual control of the degree of cooling. A new means of controlling heat removal from the plunger has been developed and is fully automatic, which makes it particularly suitable for use in the glass factory.
引用
收藏
页码：317 / 320
相关论文
共 50 条
  • [41] Primary and Secondary Noise Abatement Measures on Presses.
    Hoffmann, H.
    1974, 21 (06): : 199 - 204
  • [42] TRANSIENT RESPONSE AND STABILITY ANALYSIS ON HYDRAULIC PRESSES.
    INOUE, Y.
    1981, V 31 (N 1): : 32 - 36
  • [43] Application of a Stacking Plant for the Unloading of Cutting Presses.
    Geistlinger, Ludwig
    Werkstatt und Betrieb, 1985, 118 (04): : 233 - 235
  • [44] POSSIBILITIES FOR NOISE REDUCTION ON MECHANICAL BLANKING PRESSES.
    Hoffman, H.
    Sheet Metal Industries, 1973, 50 (05): : 259 - 264
  • [45] Protective Systems and Feeds for Precision Stamping Presses.
    Hoffmann, Hartmut
    Panknin, Walter
    Baender Bleche Rohre, 1985, 26 (03): : 70 - 72
  • [46] Economic Sheet Metal Forming with Quintus Presses.
    Ohlwein, Klaus
    Blech, Rohre, Profile, 1984, 31 (06): : 240 - 243
  • [47] Pushcart Prize XXVII: Best of the small presses.
    Walsh, FD
    LIBRARY JOURNAL, 2003, 128 (08) : 114 - 114
  • [48] Accuracy Requirements Imposed on Precision Stamping Presses.
    Hoffmann, Hartmut
    Panknin, Walter
    Baender Bleche Rohre, 1985, 26 (02): : 46 - 49
  • [49] PSEUDO-HIP USING CONVENTIONAL PRESSES.
    Kuhn, H.A.
    Ferguson, B.L.
    Smith, O.D.
    Metal Powder Report, 1983, 38 (06) : 321 - 323
  • [50] VERIFICATION OF PLUNGER COOLING FOR GLASS FORMING IN REAL WORKING MODE
    Stary, Michal
    Salac, Petr
    EFM11 - EXPERIMENTAL FLUID MECHANICS 2011, 2012, 25
12345