Automatic Plunger Cooling for Glass Presses.

被引：0
|
作者：
Lindner, Walter
机构：
来源：
| 1978年 / 51卷 / 12期
关键词：
D O I：
暂无
中图分类号：
TQ17 [硅酸盐工业];
学科分类号：
0805 ; 080502 ;
摘要：
The importance of mold temperature on surface quality of glass products is evaluated with particular emphasis on the dipping plunger. The usual method of cooling plungers with fan air or sometimes also with compressed air has some important disadvantages: very high energy cost, loud noise from the cooling nozzles, permanent installation of the nozzles, inability to control the machine and manual control of the degree of cooling. A new means of controlling heat removal from the plunger has been developed and is fully automatic, which makes it particularly suitable for use in the glass factory.
引用
收藏
页码：317 / 320
相关论文
共 50 条
  • [31] Safety and Design of Workpieces on Hydraulic Presses.
    Neff, Fritz-J.
    Werkstatt und Betrieb, 1985, 118 (10): : 683 - 685
  • [32] Rigidity and Geometrical Deviations in Punching Presses.
    Drakenberg, Sten
    Institutet for Verkstadsteknisk Forskning, IVF Resultat, 1972, (72629):
  • [33] NOISE RADIATED FROM FORGING PRESSES.
    Doege, Eckart
    Wischmann, Gerhard
    Noise control engineering, 1985, 24 (02): : 44 - 48
  • [34] Practical Experience in the Operation of Filter Presses.
    Titz, B.
    Keramische Zeitschrift, 1988, 40 (04) : 257 - 259
  • [35] CNC and DNC Operation of Hydraulic Presses.
    Neff, Fritz-J.
    Werkstatt und Betrieb, 1986, 119 (11): : 947 - 949
  • [36] Wide Range of Application of Hydraulic Presses.
    Neff, F.J.
    Werkstatt und Betrieb, 1980, 113 (05): : 303 - 306
  • [37] MECHANIZED SYSTEM FOR STRIP FEEDING IN PRESSES.
    Titov, Yu.S.
    Kuz'min, G.G.
    Chemical and Petroleum Engineering, 1986, 22 (08) : 407 - 408
  • [38] PROTECTIVE SYSTEMS AND FEEDS IN FINEBLANKING PRESSES.
    Hoffmann, Hartmut
    Panknin, Walter
    Strips Sheets Tubes, 1985, 2 (02): : 38 - 40
  • [39] PREVENTIVE MAINTENANCE FOR MECHANICAL PUNCH PRESSES.
    Petruck, George
    Technical Paper - Society of Manufacturing Engineers. MF, 1980,
  • [40] CALCULATING THE COMPRESSION PARAMETERS OF ROLL PRESSES.
    Tyutyunnikov, Yu.B.
    Vasil'ev, V.S.
    Lur'e, M.V.
    Coke and chemistry U.S.S.R., 1980, (03): : 8 - 11
12345