NOTCH TOUGHNESS OF BRAZED JOINTS WITH GOLD-NICKEL FILLER METAL AND AMORPHOUS NICKEL-BASE FILLER METAL.

被引：0
|
作者：
Onzawa, Tadao [1 ]
Suzumura, Akio [1 ]
Murata, Yasuo [1 ]
机构：
[1] Tokyo Inst of Technology, Jpn, Tokyo Inst of Technology, Jpn
来源：
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 1986年 / 4卷 / 01期
关键词：
GOLD NICKEL ALLOYS - MATERIALS TESTING - NICKEL AND ALLOYS - STAINLESS STEEL - WELDS - Mechanical Properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The notch toughness of brazed joints with a gold-18% nickel alloy and an amorphous nickel-base filler metal was investigated. The base metals used were SUS304 stainless steel, SUS420J2 stainless steel, Inconel X-750 nickel-base superalloy and MAS-1 maraging steel. The specimen for the notch toughness test was a rectangular butt-brazed type which finished the standard 2 mm V-notch Charpy specimen after brazing. These specimens were tested at temperature ranging from minus 196 degree C to 600 degree C.
引用
收藏
页码：187 / 192
相关论文
共 50 条
  • [31] Brazing of superalloy GH586 with nickel-base filler metals
    Li, Tian-Wen
    Guo, Wan-Lin
    Huai, Jun-Feng
    Cailiao Gongcheng/Journal of Materials Engineering, 2010, (10): : 48 - 52
  • [32] DESIGNING THE BRAZED JOINT PROPERTIES WITH APPLICATION OF AMORPHOUS TAPES AS A FILLER METAL
    SZEWIECZEK, D
    TYRLIKHELD, J
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 53 (1-2) : 405 - 412
  • [33] WIDE JOINT CLEARANCE BRAZING WITH NICKEL-BASE FILLER METALS.
    Lugscheider, E.
    Dietrich, V.
    Mittendorff, J.
    Welding Journal (Miami, Fla), 1988, 67 (02):
  • [34] The development of a high-chromium, nickel-base consumable-filler metal 52XL-for nuclear applications
    Fink, C.
    Hope, A. T.
    McCracken, S. L.
    Lippold, J. C.
    WELDING IN THE WORLD, 2022, 66 (11) : 2171 - 2190
  • [35] The development of a high-chromium, nickel-base consumable-filler metal 52XL-for nuclear applications
    C. Fink
    A. T. Hope
    S. L. McCracken
    J. C. Lippold
    Welding in the World, 2022, 66 : 2171 - 2190
  • [36] Microstructure and strength of brazed joints of Ti3Al base alloy with AgCuZn filler metal
    He, P
    Feng, JC
    Zhou, H
    MATERIALS SCIENCE AND TECHNOLOGY, 2005, 21 (04) : 445 - 450
  • [37] Microstructure and strength of brazed joints of Ti3Al-base alloy with TiZrNiCu filler metal
    He, P
    Feng, JC
    Zhou, H
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 392 (1-2): : 81 - 86
  • [38] Varying ultrasonic attenuation in welds with nickel filler metal
    Luprano, V.A.M., 1600, Elsevier Science S.A., Lausanne, Switzerland (211-1):
  • [39] Fatigue strength of silver-filler brazed joints in nickel-copper alloys
    Hattori, Shuji
    Okada, Tsunenori
    Zairyo/Journal of the Society of Materials Science, Japan, 1991, 40 (457) : 1330 - 1335
  • [40] Coking by metal dusting of nickel-base alloys
    Strauss, S
    Krajak, R
    Grabke, HJ
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 1999, 50 (11): : 622 - 627
12345