NOTCH TOUGHNESS OF BRAZED JOINTS WITH GOLD-NICKEL FILLER METAL AND AMORPHOUS NICKEL-BASE FILLER METAL.

被引：0
|
作者：
Onzawa, Tadao [1 ]
Suzumura, Akio [1 ]
Murata, Yasuo [1 ]
机构：
[1] Tokyo Inst of Technology, Jpn, Tokyo Inst of Technology, Jpn
来源：
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 1986年 / 4卷 / 01期
关键词：
GOLD NICKEL ALLOYS - MATERIALS TESTING - NICKEL AND ALLOYS - STAINLESS STEEL - WELDS - Mechanical Properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The notch toughness of brazed joints with a gold-18% nickel alloy and an amorphous nickel-base filler metal was investigated. The base metals used were SUS304 stainless steel, SUS420J2 stainless steel, Inconel X-750 nickel-base superalloy and MAS-1 maraging steel. The specimen for the notch toughness test was a rectangular butt-brazed type which finished the standard 2 mm V-notch Charpy specimen after brazing. These specimens were tested at temperature ranging from minus 196 degree C to 600 degree C.
引用
收藏
页码：187 / 192
相关论文
共 50 条
  • [21] EVALUATION OF DISPLACEMENT OF BUTT JOINTS IN WELDING WITH POWDERED FILLER METAL.
    Nekrasova, I.G.
    Welding Production (English translation of Svarochnoe Proizvodstvo), 1982, 29 (10): : 9 - 11
  • [22] WIDE JOINT CLEARANCE BRAZING WITH NICKEL-BASE FILLER METALS
    LUGSCHEIDER, E
    DIETRICH, V
    MITTENDORFF, J
    WELDING JOURNAL, 1988, 67 (02) : S47 - S51
  • [23] Aging of brazed joints - Interface reactions in base metal/filler metal couples - Part 1: Low-temperature Ag-Cu-Ti filler metal
    Vianco, P.T.
    Hosking, F.M.
    Stephens, J.J.
    Walker, C.A.
    Neilsen, M.K.
    Glass, S.J.
    Monroe, S.L.
    Welding Journal (Miami, Fla), 2002, 81 (10):
  • [24] AN OBSERVATION OF THE OVERFLOW OF AG-CU-TI FILLER METAL ON THE SURFACE OF NICKEL-BASE ALLOY INCONEL 600
    CHEN, JH
    WANG, GZ
    NOGI, K
    KAMAI, M
    SATO, N
    IWAMOTO, N
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1992, 11 (22) : 1473 - 1475
  • [25] Thermal fatigue damage of steel joints brazed with various nickel filler metals
    Penyaz, M. A.
    Ivannikov, A. A.
    Kalin, B. A.
    Dzhumaev, P. S.
    NON-FERROUS METALS, 2019, (01): : 33 - 39
  • [26] Metal dusting of nickel-base alloys
    Grabke, HJ
    Krajak, R
    MullerLorenz, EM
    Strauss, S
    WERKSTOFFE UND KORROSION-MATERIALS AND CORROSION, 1996, 47 (09): : 495 - 504
  • [27] Metal dusting of nickel-base alloys
    Klower, J
    Grabke, HJ
    Muller-Lorenz, EM
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 1998, 49 (05): : 328 - 329
  • [28] Formation Process of Joints Brazing with Amorphous Filler Metal
    Yu Weiyuan
    Lu Wenjiang
    Xia Tiandong
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (04) : 688 - 691
  • [29] Formation process of joints brazing with amorphous filler metal
    Yu, Weiyuan
    Lu, Wenjiang
    Xia, Tiandong
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2013, 42 (04): : 688 - 691
  • [30] Relation between the Mechanical Properties of the Steel Brazed Joints and its Filler Metal Elements and Surface Roughness of Base Metal
    Suezawa, Yoshifumi
    HEAT TREATING, 2006, : 59 - 65
12345