NOTCH TOUGHNESS OF BRAZED JOINTS WITH GOLD-NICKEL FILLER METAL AND AMORPHOUS NICKEL-BASE FILLER METAL.

被引：0
|
作者：
Onzawa, Tadao [1 ]
Suzumura, Akio [1 ]
Murata, Yasuo [1 ]
机构：
[1] Tokyo Inst of Technology, Jpn, Tokyo Inst of Technology, Jpn
来源：
Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society | 1986年 / 4卷 / 01期
关键词：
GOLD NICKEL ALLOYS - MATERIALS TESTING - NICKEL AND ALLOYS - STAINLESS STEEL - WELDS - Mechanical Properties;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The notch toughness of brazed joints with a gold-18% nickel alloy and an amorphous nickel-base filler metal was investigated. The base metals used were SUS304 stainless steel, SUS420J2 stainless steel, Inconel X-750 nickel-base superalloy and MAS-1 maraging steel. The specimen for the notch toughness test was a rectangular butt-brazed type which finished the standard 2 mm V-notch Charpy specimen after brazing. These specimens were tested at temperature ranging from minus 196 degree C to 600 degree C.
引用
收藏
页码：187 / 192
相关论文
共 50 条
  • [1] NICKEL-BASE FILLER METALS OF LOW PRECIOUS METAL CONTENT
    LUGSCHEIDER, E
    PELSTER, H
    WELDING JOURNAL, 1983, 62 (10) : S261 - S266
  • [2] Joint strength and microstructure of SUS304 brazed with nickel-base filler metal for heat exchangers
    Takayama, S
    Arikura, Y
    Shohji, I
    Nakazawa, T
    Matsumoto, K
    Hikita, M
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2004, 68 (02) : 130 - 133
  • [3] Microstructural Evolution and Mechanical Properties of Nickel-Base Superalloy Brazed Joints Using a MPCA Filler
    Gao, Minrui
    Schneiderman, Benjamin
    Gilbert, Sarah M.
    Yu, Zhenzhen
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2019, 50A (11): : 5117 - 5127
  • [4] Microstructural Evolution and Mechanical Properties of Nickel-Base Superalloy Brazed Joints Using a MPCA Filler
    Minrui Gao
    Benjamin Schneiderman
    Sarah M. Gilbert
    Zhenzhen Yu
    Metallurgical and Materials Transactions A, 2019, 50 : 5117 - 5127
  • [5] JOINING OF SiC USING AMORPHOUS Ti BASE FILLER METAL.
    Naka, Masaaki
    Tanaka, Tasuku
    Okamoto, Ikuo
    Transactions of JWRI (Japanese Welding Research Institute), 1986, 15 (01): : 49 - 54
  • [6] BRAZED JOINT STRENGTH OF STAINLESS-STEEL WITH NICKEL-BASE FILLER METALS
    KAWAKATSU, I
    OSAWA, T
    SAITO, H
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1979, 43 (11) : 1001 - 1007
  • [7] A STUDY OF THE BRAZEABILITY OF NICKEL-BASED BRAZING FILLER METAL FOIL FOR JOINING NICKEL-BASE METAL TO MILD-STEEL BASE-METAL
    MIYAZAWA, Y
    ARIGA, T
    WELDING JOURNAL, 1993, 72 (07) : S294 - S300
  • [8] EFFECT OF FLUXES ON STEEL JOINTS BRAZED WITH SILVER BASE FILLER METAL
    SCHILLINGER, DE
    ADDISON, HJ
    WELDING JOURNAL, 1976, 55 (10) : S302 - S308
  • [9] NICKEL-PALLADIUM BASE BRAZING FILLER METAL
    DSILVA, TL
    WELDING JOURNAL, 1979, 59 (10) : S283 - S286
  • [10] NICKEL BASE FILLER METAL SAVES DOLLARS IN ENGLAND
    不详
    WELDING JOURNAL, 1970, 49 (01) : 48 - &
12345