STRUCTURE AND PROPERTIES OF TWO-PHASE WELDS IN MULTI-PASS WELDING.

被引：0
|
作者：
Savchenko, A.I.
机构：
来源：
Welding Production (English translation of Svarochnoe Proizvodstvo) | 1985年 / 32卷 / 12期
关键词：
WELDING; ELECTRIC ARC - Submerged Arc - WELDS - Metallurgy;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Investigations were carried out on single-, two- and three-pass joints made by automatic submerged-arc welding with Sv-08Kh20N9G7T and Sv-10G36M206 wires 5mm in diameter into a V-shaped groove 30 mm deep with an opening angle of 50 degree in type 30KhN3MF steel. The welded joints were made in steps in order to facilitate evaluation of the effect of each subsequent pass on the structure and properties of the metal of the previous bead. Depending on the chemical composition of the welding wire, multi-pass welding was characterized by the precipitation of embrittling phases in the weld metal which slightly change the mechanical properties of the welded joints.
引用
收藏
页码：20 / 21
相关论文
共 50 条
  • [41] Coupled thermomechanical FE analysis of multi-pass welding in thick pipe
    Pathak, Ashish
    Jaiswal, Sandeep
    Singh, Chandra Pal
    Nhaichaniya, Gajendra Kumar
    INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (09): : 6825 - 6836
  • [42] KINETICS OF THE STRESSES AND STRAINS IN MULTI-PASS WELDING OF CLAD METAL PLATES
    DYAKOV, YG
    KARKHIN, VA
    ANIKOVSKII, VV
    AUTOMATIC WELDING USSR, 1984, 37 (08): : 18 - 21
  • [43] MECHANISM FOR AUTOMATIC WEAVING AND RAISING OF ELECTRODE DURING MULTI-PASS WELDING
    GOTALSKII, YN
    STRETOVI.AD
    AUTOMATIC WELDING USSR, 1970, 23 (01): : 66 - +
  • [44] SIMULATION OF NONLINEAR HEAT TRANSFER AND RESIDUAL STRESS FOR MULTI-PASS WELDING
    Li, Hong
    Li, Hongliang
    Gao, Xiang
    Ni, Yongliang
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION (IMECE 2010), VOL 9, 2012, : 459 - 468
  • [45] Numerical model of multi-pass repair process by temper bead welding
    1600, Japan Welding Society (31):
  • [46] Numerical simulation of multi-pass GTA welding of grade 91 steel
    Zubairuddin, M.
    Albert, S. K.
    Vasudevan, M.
    Mahadevan, S.
    Chaudhari, V.
    Suri, V. K.
    JOURNAL OF MANUFACTURING PROCESSES, 2017, 27 : 87 - 97
  • [47] Multi-pass welding strategy for thick plate with mismatched groove by robot
    Huang J.
    Gai S.
    Xue L.
    Huang J.
    Cao Y.
    Zou Y.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2020, 41 (06): : 60 - 66
  • [48] Collision-free Path Planning for Multi-pass Robotic Welding
    Ahmed, Syeda Mariam
    Yuan, Jinqiang
    Wu, Yue
    Chew, Chee Meng
    Pang, Chee Khiang
    PROCEEDINGS OF 2015 IEEE 20TH CONFERENCE ON EMERGING TECHNOLOGIES & FACTORY AUTOMATION (ETFA), 2015,
  • [49] Defocusing techniques for multi-pass laser welding of austenitic stainless steel
    Karhu, Miikka
    Kujanpaa, Veli
    15TH NORDIC LASER MATERIALS PROCESSING CONFERENCE, NOLAMP 15, 2015, 78 : 53 - 64
  • [50] Investigations on the microstructure and mechanical properties of multi-pass PCGTA welding of super-duplex stainless steel
    K DEVENDRANATH RAMKUMAR
    DEBIDUTTA MISHRA
    G THIRUVENGATAM
    S P SUDHARSAN
    TADIKONDA HARSHA MOHAN
    VIMAL SAXENA
    RACHIT PANDEY
    N ARIVAZHAGAN
    Bulletin of Materials Science, 2015, 38 : 837 - 846
12345