CRACK GROWTH IN THE VICINITY OF WELDS.

被引：0
|
作者：
Adams, N.J.I.
机构：
来源：
Welding Journal (Miami, Fla) | 1973年 / 52卷 / 11期
关键词：
WELDING; ELECTRIC - Electron Beam;
D O I：
暂无
中图分类号：
TG4 [焊接、金属切割及金属粘接];
学科分类号：
080201 ; 080503 ;
摘要：
Fatigue crack growth in the vicinity of welded joints in wide plates has been examined. In one series of tests the applied load was normal to the crack plane and growth was initiated in the center of the weld bead. Crack growth in gas tungsten-arc and electron beam welds was studied. The second series of tests involved crack growth normal to the weld line to examine the effect of residual stress on crack growth. An analytical procedure was developed to predict crack growth when compressive residual stresses are present.
引用
收藏
相关论文
共 50 条
  • [1] CRACK GROWTH IN VICINITY OF WELDS
    ADAMS, NJI
    WELDING JOURNAL, 1973, 52 (11) : S508 - S513
  • [2] FATIGUE CRACK PROPAGATION AT SPOT WELDS.
    Cooper, J.F.
    Smith, R.A.
    Metal construction, 1986, 18 (06):
  • [3] Surface fatigue crack growth in vessels and welds. Measurement methods and analysis of large cracks
    Radon, JC
    LOCALIZED DAMAGE IV: COMPUTER-AIDED ASSESSMENT AND CONTROL, 1996, : 125 - 136
  • [4] Fracture Mechanics Analysis of Crack Propagation in Rails and Rail Welds.
    Edel, Karl-Otto
    Schweisstechnik Berlin, 1985, 35 (12): : 555 - 558
  • [5] Failure of Welds.
    Kurz, Richard
    Schweissen und Schneiden/Welding and Cutting, 1973, 25 (02): : 48 - 52
  • [6] Loading of Plug Welds.
    Moebius, W.
    Seyffarth, W.
    Mueller, H.
    Schweisstechnik Berlin, 1983, 33 (09): : 401 - 404
  • [7] SPECIFICATIONS AND EXAMINATION OF WELDS.
    Watkinson, F.
    South African Mechanical Engineer, 1976, 26 (11): : 470 - 481
  • [8] Lamellar Tearing in Welds.
    Koch, Helmut
    Schweisstechnik (Vienna), 1974, 28 (06): : 125 - 126
  • [9] ANALYSIS OF DEFECTS IN WELDS.
    Bartholome, G.
    Vasoukis, G.
    American Society of Mechanical Engineers (Paper), 1975, (75 -PVP-14 for meet):
  • [10] Internal Stresses in Welds.
    Rappe, Hans Achim
    Schweissen und Schneiden/Welding and Cutting, 1974, 26 (02): : 45 - 50
12345