New Developments in the Production and Heat Treatment of High-Speed Steels.

被引：0
|
作者：
Kulmburg, A.
Schindler, A.
机构：
来源：
Metallurgia Italiana | 1977年 / 32卷 / 02期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A new technique is described that can be used to produce high-speed steels without microsegregations in bars having a diameter as small as 350 mm and minimum length of 3 m. The high-speed steels produced by this technique offer greater toughness, better dimensional stability during hardening, and are less susceptible to overheating.
引用
收藏
页码：81 / 85
相关论文
共 50 条
  • [31] SALT BATH HEAT-TREATMENT OF TOOL AND HIGH-SPEED STEELS
    HADLEY, PB
    METALLURGIA, 1978, 45 (04): : 204 - 204
  • [32] Some Problems of Salt-Bath Hardening of High-Speed Steels.
    Helm, Lothar
    Ploetner, Lothar
    Bergmann, Sabine
    Wissenschaftliche Zeitschrift - Technische Hochschule Ilmenau, 1980, 26 (05): : 23 - 37
  • [33] RATIONAL SELECTION AND HEAT-TREATMENT OF MODERN HIGH-SPEED STEELS
    WYSZKOWSKI, J
    KRZANOWSKI, A
    MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1980, 53 (12): : 669 - 673
  • [34] Crack resistances of high-speed and tool steels after heat treatment
    Petrov, V.I.
    Kuznetsova, V.A.
    Chelyshev, N.A.
    Semenov, S.L.
    Izvestiya Vysshikh Uchebnykh Zavedenii, Chernaya Metallurgiya, 1992, (06):
  • [35] INVESTIGATION OF THE CARBIDE PHASE IN W-Mo HIGH-SPEED STEELS.
    Gulyaev, A.P.
    Kupalova, I.K.
    Baikov, A.M.
    Metal Science and Heat Treatment, 1972, 14 (7-8) : 680 - 682
  • [36] Chemical Inhomogeneity of Eutectic Carbides of Tungsten Molybdenum High-speed Steels.
    Taran, Yu.N.
    Vukelich, S.B.
    Nizhnikovskaya, P.F.
    Izvestia Akademii nauk SSSR. Metally, 1983, (02): : 95 - 102
  • [37] IMPACT-FATIGUE STRENGTH OF CAST AND WROUGHT HIGH-SPEED STEELS.
    Cherkasov, V.E.
    Yakshin, N.M.
    Kavitskii, I.M.
    Metal Science and Heat Treatment (English Translation of Metallovedenie i Termicheskaya Obrabotka, 1986, 28 (3-4): : 240 - 244
  • [38] PLASTICITY OF NEW HIGH-SPEED STEELS
    KHAZANOV, IO
    METAL SCIENCE AND HEAT TREATMENT, 1975, 17 (9-10) : 783 - 786
  • [39] Machinability of the new high-speed steels
    Flid, M.D.
    Sedov, V.S.
    Soviet engineering research, 1988, 8 (01):
  • [40] INFLUENCE OF HEAT TREATMENT ON HARDNESS AND PHASE COMPOSITION OF WELD-FACED HIGH SPEED STEELS.
    Fedorov, N.S.
    Zubkov, N.S.
    Krepysheva, L.B.
    1600, (13):
12345