Development of heavy gauge 60 kgf/mm2 class tensile strength steel plate with low yield ratio for architecture use

被引：0

作者：

Shikanai, Nobuo ^{[1
]}

Sakui, Sin ^{[1
]}

Tagawa, Hisatoshi ^{[1
]}

Watanabe, Itaru ^{[1
]}

Narita, Hiroshi ^{[1
]}

Naganawa, Yutaka ^{[1
]}

机构：

[1] NKK Corp

来源：

NKK Technical Review | 1988年 / 54期

关键词：

Buildings--Tall - Plates--Steel - Steel Heat Treatment--Thermomechanical Treatment - Steel Testing--Tensile Tests;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The 50 kgf/mm2 class tensile strength steel plates with low Yield Ratio (YR) have been widely applied to steel-frame buildings. On the other hand, conventional 60 kgf/mm2 class tensile strength steel plates have rarely been applied to steel-frame buildings because of higher YR compared with 50 kgf/mm2 class steel plates. However, application of high strength steel plates brings about many advantages such as saving welding cost, introducing new techniques into structural design and so on. In the present paper, the influence of heat treatment conditions and Thermo-Mechanical Control Process on yield and tensile strengths and YR was investigated in order to develop the heavy gauge 60 kgf/mm2 class steel plate with low YR.

引用

页码：1 / 7

共 50 条

[41] EXTRA-HEAVY STEEL PLATES OF 80-KGF/MM2 CLASS STRENGTH WITH GOOD WELDABILITY FOR RACKS OF JACK-UP OIL RIGS.
Nippon Steel Welding Products &, Engineering Co, Technical Service, Dep, Jpn, Nippon Steel Welding Products & Engineering Co, Technical Service Dep, Jpn
1984, : 47 - 62
[42] INVESTIGATION ON LARGE HEAT INPUT WELDABILITY OF TENSILE-STRENGTH 50 KGF/MM2 GRADE STEEL PLATES FOR ARCTIC OFFSHORE STRUCTURES
KOMATSUBARA, N
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 (05): : S664 - S664
[43] DEVELOPMENT OF 100 KGF/MM2 GRADE COLD-ROLLED HIGH-STRENGTH SHEET STEEL WITH SUPERIOR DUCTILITY
KOYAMA, K
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1369 - 1369
[44] INVESTIGATION ON LARGE HEAT INPUT WELDABILITY OF STEEL PLATES WITH 50 KGF/MM2 GRADE FOR ARCTIC OFFSHORE STRUCTURES .3. DEVELOPMENT OF TENSILE-STRENGTH 50 KGF/MM2 GRADE STEEL PLATES FOR ARCTIC OFFSHORE STRUCTURES WITH HIGH TOUGHNESS IN LARGE HEAT INPUT WELDS
FURUSAWA, J
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1155 - 1155
[45] HIGH-STRENGTH STEEL PLATES PRODUCED BY CONTINUOUS ONLINE CONTROL PROCESS .7. DEVELOPMENT OF THICK PLATES WITH TENSILE-STRENGTH OF 50 KGF/MM2 FOR ARCTIC SERVICE
TSUZUKI, T
TOMITA, Y
YAMABA, R
TANAKA, A
KINOSHITA, H
OKAMOTO, K
YOSHIE, A
TAKAISHI, S
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (01) : B35 - B35
[46] DEVELOPMENT OF HIGH-STRENGTH WELDABLE STEEL SHAPE .3. MECHANICAL-PROPERTIES OF LOW-CARBON EQUIVALENT YP 36 KGF/MM2 STEEL
HIRAISHI, T
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (13): : 1278 - 1278
[47] DEVELOPMENT OF CLASS 50kgf/mmkgf/mm2 STEEL FOR OFFSHORE STRUCTURES AND VESSELS IN THE ARCTIC - DEVELOPMENT OF OLAC - PART 3.
Tsukada, Koshiro
Yamazaki, Yoshitaka
Matsumoto, Kazuaki
Shironouchi, Yukio
Suzuki, Motoaki
Watanabe, Itaru
Nippon Kokan technical report overseas, 1983, (39): : 31 - 41
[48] CORROSION FATIGUE CRACK INITIATION BEHAVIOR OF 80 kgf/mm2 HIGH-TENSILE STRENGTH STEEL WELDMENT IN SYNTHETIC SEA WATER.
Komai, Kenjiro
Minoshima, Kohji
Kim, Guisik
Zairyo/Journal of the Society of Materials Science, Japan, 1987, 36 (401) : 141 - 146
[49] INFLUENCE OF MARINE-ENVIRONMENT ON CORROSION FATIGUE CRACK-GROWTH BEHAVIOR IN 80 KGF/MM2 CLASS HIGH-TENSILE STEEL
MORI, K
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1202 - 1202
[50] Development of a 800 MPa dual-phase and low yield ratio heavy steel plate
State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
Dongbei Daxue Xuebao, 2006, 4 (414-417):

← 1 2 3 4 5 →