Development of heavy gauge 60 kgf/mm2 class tensile strength steel plate with low yield ratio for architecture use

被引：0

作者：

Shikanai, Nobuo ^{[1
]}

Sakui, Sin ^{[1
]}

Tagawa, Hisatoshi ^{[1
]}

Watanabe, Itaru ^{[1
]}

Narita, Hiroshi ^{[1
]}

Naganawa, Yutaka ^{[1
]}

机构：

[1] NKK Corp

来源：

NKK Technical Review | 1988年 / 54期

关键词：

Buildings--Tall - Plates--Steel - Steel Heat Treatment--Thermomechanical Treatment - Steel Testing--Tensile Tests;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The 50 kgf/mm2 class tensile strength steel plates with low Yield Ratio (YR) have been widely applied to steel-frame buildings. On the other hand, conventional 60 kgf/mm2 class tensile strength steel plates have rarely been applied to steel-frame buildings because of higher YR compared with 50 kgf/mm2 class steel plates. However, application of high strength steel plates brings about many advantages such as saving welding cost, introducing new techniques into structural design and so on. In the present paper, the influence of heat treatment conditions and Thermo-Mechanical Control Process on yield and tensile strengths and YR was investigated in order to develop the heavy gauge 60 kgf/mm2 class steel plate with low YR.

引用

页码：1 / 7

共 50 条

[1] HEAVY THICK 60 KGF/MM2 CLASS STEEL PLATE WITH LOW-YIELD RATIO
SHIKANAI, N
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (04): : S345 - S345
[2] STUDY FOR 100 KGF/MM2 CLASS HIGH-TENSILE STRENGTH STEEL .1. DEVELOPMENT OF NEW 100 KGF/MM2 CLASS HIGH-TENSILE STRENGTH STEEL
OKAMURA, Y
YANO, S
INOUE, T
TANABE, Y
KAWAI, K
WATANABE, N
TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 25 (10) : B268 - B268
[3] DEVELOPMENT OF HEAVY SECTION 100 KGF/MM2 CLASS STEEL PLATE WITH SUPERIOR WELDABILITY
IMANAKA, M
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S615 - S615
[4] Development of controlled-rolled 70 kgf/mm2 and 80 kgf/mm2 class high tensile strength steel plates for welded structures
Amano, Keniti, 1600,
[5] DIRECT QUENCHED AND TEMPERED 60 KGF-MM2 CLASS STEEL PLATE WITH LOW-YIELD RATIO
SUGIE, E
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (13): : 1541 - 1541
[6] DEVELOPMENT OF 47 KGF/MM2 CLASS YIELD STRENGTH STEEL PLATES FOR ARCTIC OFFSHORE STRUCTURE
SHIWAKU, T
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1153 - 1153
[7] THE DEVELOPMENT OF 42 KGF/MM2 CLASS YIELD STRENGTH STEEL PLATES FOR ARCTIC OFFSHORE STRUCTURE .2. CHARACTERISTICS OF EXTRA LOW C-NB STEEL PLATES WITH 42 KGF/MM2 CLASS YIELD STRENGTH FOR OFFSHORE STRUCTURE
SHIWAKU, T
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (05): : S619 - S619
[8] STUDY OF TOUGHNESS OF WELDED JOINT OF 80 KGF/MM2 CLASS HIGH-TENSILE STRENGTH STEEL FOR LOW-TEMPERATURE SERVICE .3. DEVELOPMENT OF HEAVY SECTION 80 KGF/MM2 CLASS HIGH-TENSILE STRENGTH STEEL WITH HIGH TOUGHNESS OF WELDED JOINT
CHIBA, H
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 73 (05): : S611 - S611
[9] DEVELOPMENT OF 50 kgf/mm2 CLASS TENSILE STRENGTH STEEL PLATE FOR ARCTIC OFFSHORE STRUCTURE `KCL 36E MOD`.
Kano, Motomi
Kaji, Haruo
Takashima, Shuji
Yamauchi, Manabu
1600, (35):
[10] DEVELOPMENT AND PRODUCTION OF 42 KGF/MM2 CLASS YIELD STRENGTH STEEL PLATE FOR ARCTIC OFFSHORE STRUCTURE .2. PRODUCTION OF HIGH-STRENGTH STEEL PLATE FOR ARCTIC OFFSHORE STRUCTURE
KOBAYASHI, E
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1152 - 1152

← 1 2 3 4 5 →