A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers

被引：0
|
作者：
Liu, K. [2 ]
Li, X.P. [1 ]
Rahman, M. [1 ]
Neo, K.S. [1 ]
Liu, X.D. [2 ]
机构：
[1] Department of Mechanical Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260, Singapore
[2] Machining Technology Group, Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, Singapore 638075, Singapore
来源：
International Journal of Advanced Manufacturing Technology | 2007年 / 32卷 / 7-8期
关键词：
Ductile mode cutting of silicon wafers can be achieved under certain cutting conditions and tool geometry. An experimental investigation of the critical undeformed chip thickness in relation to the tool cutting edge radius for the brittle-ductile transition of chip formation in cutting of silicon wafers is presented in this paper. Experimental tests for cutting of silicon wafers using diamond tools of different cutting edge radii for a range of undeformed chip thickness are conducted on an ultra-precision lathe. Both ductile and brittle mode of chip formation processes are observed in the cutting tests. The results indicate that ductile cutting of silicon can be achieved at certain values of the undeformed chip thickness; which depends on the tool cutting edge radius. It is found that in cutting of silicon wafers with a certain tool cutting edge radius there is a critical value of undeformed chip thickness beyond which the chip formation changes from ductile mode to brittle mode. The ductile-brittle transition of chip formation varies with the tool cutting edge radius. Within the range of cutting conditions in the present study; it has also been found that the larger the cutting edge radius; the larger the critical undeformed chip thickness for the ductile-brittle transition in the chip formation. © Springer-Verlag London Limited 2007;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：631 / 637
相关论文
共 50 条
  • [41] Cutting tool edge radius and depth of cut influence on the generation of the high pressure phase transformation during ductile machining
    Patten, J
    PROCEEDINGS OF: SILICON MACHINING: 1998 SPRING TOPICAL MEETING, 1998, : 88 - 91
  • [42] Effects of tool edge radius on ductile machining of silicon: an investigation by FEM
    Yan, Jiwang
    Zhao, Hongwei
    Kuriyagawa, Tsunemoto
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2009, 24 (07)
  • [43] Simulation and Experimental Study on the Effect of Edge Radius on the Cutting Condition of Carbide Inserts
    Chen, Shitao
    Bao, Zhiyuan
    Yan, Yuhong
    Lyu, Binghai
    Chen, Hongyu
    Hang, Wei
    Wang, Jinhu
    Zhao, Wenhong
    Yuan, Julong
    Wang, Xu
    MACHINES, 2024, 12 (04)
  • [44] Influence of the cutting edge radius and the material grain size on the cutting force in micro cutting
    Wu, Xian
    Li, Liang
    He, Ning
    Yao, Chenjiao
    Zhao, Meng
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2016, 45 : 359 - 364
  • [45] Ductile mode cutting of silicon microparts
    Hellmold, T
    Ruhbach, LP
    Zeadan, J
    Gatzen, HH
    PROCEEDINGS OF: SILICON MACHINING: 1998 SPRING TOPICAL MEETING, 1998, : 117 - 121
  • [46] EFFECT OF CUTTING EDGE ROUNDING RADIUS ON MACHINED SURFACE QUALITY
    CHIZHOV, VN
    RUSSIAN ENGINEERING JOURNAL, 1977, 57 (03): : 20 - 22
  • [47] Effect of ploughing force on cutting forces in micro-cutting with a rounded-edge cutting tool
    Uysal, Alper
    Altan, Erhan
    MATERIALS TODAY-PROCEEDINGS, 2015, 2 (01) : 224 - 229
  • [48] THE THERMAL CONDITION OF THE TOOL CUTTING EDGE IN INTERMITTENT CUTTING
    BHATIA, SM
    PANDEY, PC
    SHAN, HS
    WEAR, 1980, 61 (01) : 21 - 30
  • [49] Study of the mechanism of groove wear of the diamond tool in nanoscale ductile mode cutting of monocrystalline silicon
    Cai, M. B.
    Li, X. P.
    Rahman, M.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2007, 129 (02): : 281 - 286
  • [50] Evaluation of cutting temperature of a tool with a curved cutting edge
    Moiseev, Denis
    Ryzhkin, Anatoliy
    Volokitin, Gennadiy
    XIII INTERNATIONAL SCIENTIFIC-TECHNICAL CONFERENCE DYNAMIC OF TECHNICAL SYSTEMS (DTS-2017), 2017, 132
12345