A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers

被引：0
|
作者：
Liu, K. [2 ]
Li, X.P. [1 ]
Rahman, M. [1 ]
Neo, K.S. [1 ]
Liu, X.D. [2 ]
机构：
[1] Department of Mechanical Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260, Singapore
[2] Machining Technology Group, Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, Singapore 638075, Singapore
来源：
International Journal of Advanced Manufacturing Technology | 2007年 / 32卷 / 7-8期
关键词：
Ductile mode cutting of silicon wafers can be achieved under certain cutting conditions and tool geometry. An experimental investigation of the critical undeformed chip thickness in relation to the tool cutting edge radius for the brittle-ductile transition of chip formation in cutting of silicon wafers is presented in this paper. Experimental tests for cutting of silicon wafers using diamond tools of different cutting edge radii for a range of undeformed chip thickness are conducted on an ultra-precision lathe. Both ductile and brittle mode of chip formation processes are observed in the cutting tests. The results indicate that ductile cutting of silicon can be achieved at certain values of the undeformed chip thickness; which depends on the tool cutting edge radius. It is found that in cutting of silicon wafers with a certain tool cutting edge radius there is a critical value of undeformed chip thickness beyond which the chip formation changes from ductile mode to brittle mode. The ductile-brittle transition of chip formation varies with the tool cutting edge radius. Within the range of cutting conditions in the present study; it has also been found that the larger the cutting edge radius; the larger the critical undeformed chip thickness for the ductile-brittle transition in the chip formation. © Springer-Verlag London Limited 2007;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：631 / 637
相关论文
共 50 条
  • [1] A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers
    Liu, K.
    Li, X. P.
    Rahman, M.
    Neo, K. S.
    Liu, X. D.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 32 (7-8): : 631 - 637
  • [2] A study of the effect of tool cutting edge radius on ductile cutting of silicon wafers
    K. Liu
    X. P. Li
    M. Rahman
    K. S. Neo
    X. D. Liu
    The International Journal of Advanced Manufacturing Technology, 2007, 32 : 631 - 637
  • [3] Effect of cutting edge radius on ductile-brittle transition in cutting of silicon-wafers
    Li, XP
    Chan, CC
    Liu, K
    Rahman, M
    Liu, XD
    PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON FRONTIERS OF DESIGN AND MANUFACTURING, VOL 1, 2002, : 257 - 262
  • [4] The effect of the cutting edge radius on a machined surface in the nanoscale ductile mode cutting of silicon wafer
    Arefin, S.
    Li, X. P.
    Cai, M. B.
    Rahman, M.
    Liu, K.
    Tay, A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (02) : 213 - 220
  • [5] Study of the upper bound of tool edge radius in nanoscale ductile mode cutting of silicon wafer
    Li, Xiaoping
    Cai, Minbo
    Rahman, M.
    Liang, Steven
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2010, 48 (9-12): : 993 - 999
  • [6] Study of the upper bound of tool edge radius in nanoscale ductile mode cutting of silicon wafer
    Xiaoping Li
    Minbo Cai
    M. Rahman
    Steven Liang
    The International Journal of Advanced Manufacturing Technology, 2010, 48 : 993 - 999
  • [7] The upper bound of tool edge radius for nanoscale ductile mode cutting of silicon wafer
    S. Arefin
    X. P. Li
    M. Rahman
    K. Liu
    The International Journal of Advanced Manufacturing Technology, 2007, 31 : 655 - 662
  • [8] The upper bound of tool edge radius for nanoscale ductile mode cutting of silicon wafer
    Arefin, S.
    Li, X. P.
    Rahman, M.
    Liu, K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 31 (7-8): : 655 - 662
  • [9] Machined surface and subsurface in relation to cutting edge radius in nanoscale ductile cutting of silicon
    Arefin, S
    Li, XP
    Rahman, M
    He, T
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME 2005, VOL 33, 2005, 2005, 33 : 113 - 119
  • [10] Study of surface topography in nanometric ductile cutting of silicon wafers
    Liu, K
    Li, XP
    Rahman, M
    Liu, XD
    Lee, LC
    PROCEEDINGS OF THE 4TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC 2002), 2002, : 200 - 205
12345