Synthesis of Ti-Fe alloys by mechanical alloying

被引：0
|
作者：
Hotta, Hideki [1 ]
Abe, Masatake [2 ]
Kuji, Toshiro [2 ]
Uchida, Hirohisa [1 ]
机构：
[1] Graduate School of Engineering, Tokai University, 1117 Kitakaname, Hiratsuka City, Kanagawa, 259-1292, Japan
[2] Course of Science and Technology, Graduate School of Science and Technology, Unified Graduate School, 317 Nishino, Numazu City, Shizuoka, 410-0395, Japan
来源：
Journal of Alloys and Compounds | 2007年 / 439卷 / 1-2期
关键词：
In this work; the TiFe single phase alloy with CsCl-type structure was synthesized after 20 h of ball milling (mechanical alloying). Alloying process of mixture of Ti and Fe powders to the TiFe phase was discussed. It was found that synthesis of the CsCl-type TiFe phase followed the amorphous phase formation. Hydrogenation properties of obtained TiFe alloy were studied. It was found that the hydrogenation properties of TiFe synthesized by mechanical alloying were different from those of previously reported. The first plateau pressure was found at 0.5 MPa which is slightly higher than the value previously reported. However; the second plateau pressure was found at 25 MPa; which is much higher than the literature value. The maximum amount of hydrogen absorbed in the TiFe alloy was about 1.3 wt.% at 298 K. © 2006 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：221 / 226
相关论文
共 50 条
  • [41] X-RAY SPECTRANALYSIS OF ENERGY SPECTRUM OF TI-FE ALLOYS
    NEMNONOV, SA
    KOLOBOVA, KM
    PHYSICS OF METALS AND METALLOGRAPHY-USSR, 1967, 23 (03): : 66 - &
  • [42] MICROSTRUCTURES AND TENSILE PROPERTIES OF HOT ISOSTATICALLY PRESSED TI-FE ALLOYS
    MAJIMA, K
    HIRATA, T
    YAMAMOTO, M
    NAGAI, H
    SHOUJI, K
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1988, 52 (11) : 1113 - 1120
  • [43] The Structural Properties of Fe-Ti-B Based Alloys Produced by Mechanical Alloying
    Kon, O.
    Sen, U.
    ACTA PHYSICA POLONICA A, 2015, 127 (04) : 1214 - 1217
  • [44] Grain Boundary Wetting by a Second Solid Phase in Ti-Fe Alloys
    A. S. Gornakova
    B. B. Straumal
    A. N. Nekrasov
    A. Kilmametov
    N. S. Afonikova
    Journal of Materials Engineering and Performance, 2018, 27 : 4989 - 4992
  • [45] Sintering behavior and microstructure evolution of blended elemental Ti-Fe alloys
    Wei, Weifeng
    Liu, Yong
    Tang, Huiping
    Chen, Lifang
    Zhou, Kechao
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2004, 33 (11): : 1143 - 1148
  • [46] Corrosion Resistance of Ti-Fe Binary Alloys Fabricated by Powder Metallurgy
    Xu Wei
    Lu Xin
    Du Yanxia
    Meng Qingyu
    Li Ming
    Qu Xuanhui
    ACTA METALLURGICA SINICA, 2017, 53 (01) : 38 - 46
  • [47] Grain Boundary Wetting by a Second Solid Phase in Ti-Fe Alloys
    Gornakova, A. S.
    Straumal, B. B.
    Nekrasov, A. N.
    Kilmametov, A.
    Afonikova, N. S.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (10) : 4989 - 4992
  • [48] Magnetic properties of Sm-Fe(Ti)-C(N)/α-Fe alloys prepared by mechanical alloying
    Geng, DY
    Zhang, ZD
    Liu, W
    Zhao, XG
    Yu, MH
    Ren, WJ
    Xiao, QF
    Grössinger, R
    Hauser, R
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2003, 36 (04) : 375 - 379
  • [49] Synthesis of amorphous Ti-Al alloys by mechanical alloying of elemental powders
    张俊红
    黄伯云
    贺跃辉
    周科朝
    刘咏
    Transactions of Nonferrous Metals Society of China, 2002, (04) : 610 - 614
  • [50] Synthesis of amorphous Ti-Al alloys by mechanical alloying of elemental powders
    Zhang, JH
    Huang, BY
    He, YH
    Zhou, KC
    Liu, Y
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2002, 12 (04) : 610 - 614
12345