Synthesis of Ti-Fe alloys by mechanical alloying

被引：0
|
作者：
Hotta, Hideki [1 ]
Abe, Masatake [2 ]
Kuji, Toshiro [2 ]
Uchida, Hirohisa [1 ]
机构：
[1] Graduate School of Engineering, Tokai University, 1117 Kitakaname, Hiratsuka City, Kanagawa, 259-1292, Japan
[2] Course of Science and Technology, Graduate School of Science and Technology, Unified Graduate School, 317 Nishino, Numazu City, Shizuoka, 410-0395, Japan
来源：
Journal of Alloys and Compounds | 2007年 / 439卷 / 1-2期
关键词：
In this work; the TiFe single phase alloy with CsCl-type structure was synthesized after 20 h of ball milling (mechanical alloying). Alloying process of mixture of Ti and Fe powders to the TiFe phase was discussed. It was found that synthesis of the CsCl-type TiFe phase followed the amorphous phase formation. Hydrogenation properties of obtained TiFe alloy were studied. It was found that the hydrogenation properties of TiFe synthesized by mechanical alloying were different from those of previously reported. The first plateau pressure was found at 0.5 MPa which is slightly higher than the value previously reported. However; the second plateau pressure was found at 25 MPa; which is much higher than the literature value. The maximum amount of hydrogen absorbed in the TiFe alloy was about 1.3 wt.% at 298 K. © 2006 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：221 / 226
相关论文
共 50 条
  • [1] Synthesis of Ti-Fe alloys by mechanical alloying
    Hotta, Hideki
    Abe, Masatake
    Kuji, Toshiro
    Uchida, Hirohisa
    JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 439 (1-2) : 221 - 226
  • [2] FORMATION OF AMORPHOUS TI-FE ALLOYS BY MECHANICAL ALLOYING
    CHU, BL
    LEE, SM
    PERNG, TP
    JOURNAL OF APPLIED PHYSICS, 1991, 69 (08) : 4211 - 4215
  • [3] Structures and hydrogenation properties of Ti-Fe alloys produced by mechanical alloying
    Ikeuchi, Toshiyuki
    Saito, Tetsuji
    Kobayashi, Masanobu
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2002, 49 (10): : 861 - 867
  • [4] Hydrogen sorption and electrochemical properties of Ti-Fe based alloys synthesized by mechanical alloying
    Abrashev, B.
    Spassov, T.
    Pandev, M.
    Vassilev, S.
    Popov, A.
    BULGARIAN CHEMICAL COMMUNICATIONS, 2017, 49 : 247 - 253
  • [5] Hydrogen inducing amorphization of Ti-Fe system in mechanical alloying
    Jinshu Xuebao/Acta Metallurgica Sinica, 1998, 34 (04): : 373 - 377
  • [6] HEAT TREATMENT AND MECHANICAL PROPERTIES OF TI-FE ALLOYS
    HOLDEN, FC
    OGDEN, HR
    JAFFEE, RI
    TRANSACTIONS OF THE AMERICAN INSTITUTE OF MINING AND METALLURGICAL ENGINEERS, 1956, 206 (05): : 521 - 528
  • [7] Mechanical Alloying of Ti-Fe Alloys Using Severe Plastic Deformation by High-Pressure Torsion
    Dobromyslov, A. V.
    Taluts, N. I.
    PHYSICS OF METALS AND METALLOGRAPHY, 2018, 119 (11): : 1127 - 1132
  • [8] Mechanical properties and microstructures of cast dental Ti-Fe alloys
    Yamaguchi, Hirofumi
    Takahashi, Masatoshi
    Sasaki, Keiichi
    Takada, Yukyo
    DENTAL MATERIALS JOURNAL, 2021, 40 (01) : 61 - 67
  • [9] Diffusion of iron in β Ti-Fe alloys
    Iwate Univ, Morioka, Japan
    Scripta Mater, 6 (949-953):
  • [10] Improved Electrochemical Performances of Ti-Fe Based Alloys by Mechanical Milling
    Han, Zhong-gang
    Zhai, Ting-ting
    Yuan, Ze-ming
    Liu, Fu-chen
    Feng, Dian-chen
    Sun, Hao
    Zhang, Yang-huan
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2022, 17 (12):
12345