Modeling and optimization of Nd:YAG laser micro-weld process using Taguchi Method and a neural network

被引：0
|
作者：
Lin, Hsuan-Liang [1 ]
Chou, Chang-Pin [2 ]
机构：
[1] Department of Vehicle Engineering, Army Academy, R.O.C., 113, Jungshan E. Rd., Jungli, Taoyuan, 320, Taiwan
[2] Department of Mechanical Engineering, National Chiao Tung University, Hsinchu 300, Taiwan
来源：
International Journal of Advanced Manufacturing Technology | 2008年 / 37卷 / 5-6期
关键词：
The use of a pulsed Nd:YAG laser in the 0.1 mm- thick aluminum alloy lap micro-weld process was optimized. The welding parameters that influence the quality of the pulsed Nd:YAG laser lap micro-weld were evaluated by measuring of the tensile-shear strength. In this work; the Taguchi method was adopted to perform the initial optimization of the pulsed Nd:YAG laser micro-weld process parameters. A neural network with a Levenberg-Marquardt back-propagation (LMBP) algorithm was then adopted to develop the relationships between the welding process parameters and the tensile-shear strength of each weldment. The optimal parameters of the pulsed Nd:YAG laser micro-weld process were determined by simulating parameters using a well-trained back-propagation neural network model. Experimental results illustrate the proposed approach. © 2007 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：513 / 522
相关论文
共 50 条
  • [41] Optimization of Fusing Process Conditions Using the Taguchi Method
    Yoon, Soon Young
    Park, Chang Kyu
    Kim, Hyeong-Seok
    Kim, Sungmin
    TEXTILE RESEARCH JOURNAL, 2010, 80 (11) : 1016 - 1026
  • [42] Modeling and Multiresponse Optimization for Anaerobic Codigestion of Oil Refinery Wastewater and Chicken Manure by Using Artificial Neural Network and the Taguchi Method
    Mehryar, Esmaeil
    Ding, Weimin
    Hemmat, Abbas
    Hassan, Muhammad
    Talha, Zahir
    Kafashan, Jalal
    Huang, Hongying
    BIOMED RESEARCH INTERNATIONAL, 2017, 2017
  • [43] Modeling of Laser assisted machining process using Artificial Neural Network
    Shashank, V
    Saradhi, V. Pardha
    Jagadesh, T.
    INTERNATIONAL CONFERENCE ON APPLIED PHYSICS, POWER AND MATERIAL SCIENCE, 2019, 1172
  • [44] Pulsed Nd:YAG Laser Micro-turning Process of Alumina Ceramics
    Kibria, G.
    Doloi, B.
    Bhattacharyya, B.
    LASERS BASED MANUFACTURING, 2015, : 343 - 380
  • [45] Taguchi method modelling of Nd:YAG laser ablation of microchannels on cyclic olefin polymer film
    McCann, Ronan
    Bagga, Komal
    Duaux, Gabriel
    Stalcup, Apryll
    Vazquez, Mercedes
    Brabazon, Dermot
    OPTICS AND LASER TECHNOLOGY, 2018, 106 : 265 - 271
  • [46] Laser wafer dicing process optimization using the Taguchi approach
    Yang, Chih-Fu
    Chang, Chih-Tsung
    Wang, Rui-Teng
    Kao, Jin-Yih
    Hsu, Chun-Yao
    JOURNAL OF LASER APPLICATIONS, 2024, 36 (03)
  • [47] Application of Taguchi method in Nd-YAG laser welding of super duplex stainless steel
    Yip, WM
    Man, HC
    Ip, WH
    ICALEO'96 - PROCEEDINGS OF THE LASER MATERIALS PROCESSING CONFERENCE, 1996, 81 : D74 - D83
  • [48] Optimization of the GTA Welding Process Using Combination of the Taguchi Method and a Neural-Genetic Approach
    Lin, Hsuan-Liang
    Chou, Chang-Pin
    MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (07) : 631 - 636
  • [49] Modeling and Simulation of Apple Drying, Using Artificial Neural Network and Neuro -Taguchi's Method
    Mousavi, M.
    Javan, S.
    JOURNAL OF AGRICULTURAL SCIENCE AND TECHNOLOGY, 2009, 11 (05): : 559 - 571
  • [50] Automated inspection of micro laser spot weld quality using optical sensing and neural network techniques
    Shao, Jiaqing
    Yan, Yong
    2006 IEEE INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE PROCEEDINGS, VOLS 1-5, 2006, : 606 - +
12345