Modeling and optimization of Nd:YAG laser micro-weld process using Taguchi Method and a neural network

被引：0
|
作者：
Lin, Hsuan-Liang [1 ]
Chou, Chang-Pin [2 ]
机构：
[1] Department of Vehicle Engineering, Army Academy, R.O.C., 113, Jungshan E. Rd., Jungli, Taoyuan, 320, Taiwan
[2] Department of Mechanical Engineering, National Chiao Tung University, Hsinchu 300, Taiwan
来源：
International Journal of Advanced Manufacturing Technology | 2008年 / 37卷 / 5-6期
关键词：
The use of a pulsed Nd:YAG laser in the 0.1 mm- thick aluminum alloy lap micro-weld process was optimized. The welding parameters that influence the quality of the pulsed Nd:YAG laser lap micro-weld were evaluated by measuring of the tensile-shear strength. In this work; the Taguchi method was adopted to perform the initial optimization of the pulsed Nd:YAG laser micro-weld process parameters. A neural network with a Levenberg-Marquardt back-propagation (LMBP) algorithm was then adopted to develop the relationships between the welding process parameters and the tensile-shear strength of each weldment. The optimal parameters of the pulsed Nd:YAG laser micro-weld process were determined by simulating parameters using a well-trained back-propagation neural network model. Experimental results illustrate the proposed approach. © 2007 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：513 / 522
相关论文
共 50 条
  • [21] Prediction of Crack for Drilling Process on Alumina Using Neural Network and Taguchi Method
    Lee, Kingsun
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015, 2015
  • [22] Neural network design by using Taguchi method
    Yang, SM
    Lee, GS
    JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 1999, 121 (03): : 560 - 563
  • [23] Optimization of Nd:YAG laser welding onto magnesium alloy via Taguchi analysis
    Pan, LK
    Wang, CC
    Hsiao, YC
    Ho, KC
    OPTICS AND LASER TECHNOLOGY, 2005, 37 (01): : 33 - 42
  • [24] Process Optimization in Titanium Welding with Pulsed Nd:YAG Laser
    Torkamany, M. J.
    Ghaini, F. Malek
    Papan, E.
    Dadras, S.
    SCIENCE OF ADVANCED MATERIALS, 2012, 4 (3-4) : 489 - 496
  • [25] From statistical analysis to process optimization during cladding using a Nd:YAG laser
    亚伟
    Pathiraj B.
    于兴华
    China Welding, 2022, 31 (04) : 7 - 22
  • [26] OPTIMIZATION OF WELD BEAD GEOMETRY IN TIG WELDING PROCESS USING GREY RELATION ANALYSIS AND TAGUCHI METHOD
    Esme, Ugur
    Bayramoglu, Melih
    Kazancoglu, Yugut
    Ozgun, Sueda
    MATERIALI IN TEHNOLOGIJE, 2009, 43 (03): : 143 - 149
  • [27] Optimization and Modelling of Resistance Spot Welding Process Parameters for Quality Improvement Using Taguchi Method and Artificial Neural Network
    Soomro, Imtiaz Ali
    Pedapati, Srinivasa Rao
    Awang, Mokhtar
    Soomro, Afzal Ahmed
    Alam, Mohammad Azad
    Bhayo, Bilawal Ahmed
    IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING, 2022, 19 (04) : 1 - 10
  • [28] EFFECT OF PROCESS PARAMETERS ON WELD PENETRATION DURING PULSED ND:YAG LASER WELDING
    Hudon, Mathew
    Saigal, Anil
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2B, 2014,
  • [29] Taguchi method for 304 Stainless Steel Nd-YAG Laser Beam Welding
    Kuo, Tsung-Yuan
    Lin, Huan-Chang
    Liao, Tze-Yuan
    Kuo, Chih-Hua
    Han, Tsung-Jen
    APPLICATIONS OF ENGINEERING MATERIALS, PTS 1-4, 2011, 287-290 : 3112 - +
  • [30] Optimization of hybrid aluminum composites wear using Taguchi method and artificial neural network
    Stojanovic, Blaza
    Blagojevic, Jasmina
    Babic, Miroslav
    Velickovic, Sandra
    Miladinovic, Slavica
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2017, 69 (06) : 1005 - 1015
12345