Effect of alloy composition on heat resistance and castability of Mg-Al2Ca(Mg) quasi-binary alloys

被引：1
|
作者：
Kawabata H. [1 ]
Nishino N. [1 ]
Aikawa T. [2 ]
Ohtake K. [3 ]
Genma Y. [3 ]
机构：
[1] Toyota Central R and D Labs. Inc., Nagakute, Nagakute-cho, Aichi-gun, Aichi 480-1192
[2] Aisin Seiki Co., Ltd., Kariya-shi, Aichi
[3] Toyota Motor Corporation, Toyota-shi, Aichi
来源：
Keikinzoku/Journal of Japan Institute of Light Metals | 2010年 / 60卷 / 11期
关键词：
Castability; Diecasting; Heat resistance; Magnesium alloy;
D O I：
10.2464/jilm.60.596
中图分类号：
学科分类号：
摘要：
The effects of the amount of the Al2Ca(Mg) compound on heat resistance and castability of the Mg-Al2Ca(Mg) quasi-binary alloys, the composition ratio of aluminum and calcium of which was 2:1, were investigated. The heat resistance of the Mg-Al2Ca(Mg) quasi-binary alloys was improved by the covering of α-Mg grain boundaries with the Al2Ca(Mg) compound, and more improved by increasing of the amount of the Al2Ca(Mg) compound. The Mg-Al2Ca(Mg) quasi-binary alloys, the compositions of which were close to eutectic one, showed the alloy solidification of the skin-formation type. The duration of the transferred pressure of those molten alloys was long, and the alloys showed the high transfer ability of alloy solidification. It improved the heat resistance and the castability of the Mg-Al2Ca(Mg) quasi-binary alloys for the compositions of aluminum and calcium to be closer to eutectic.
引用
收藏
页码：596 / 601
页数：5
相关论文
共 50 条
  • [21] Effect of Heat Treatment on the Corrosion Resistance of Cast Mg-7.3Al Alloy
    Jia, Suqiu
    Liu, Guojun
    Chen, Qishuang
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 585 - +
  • [22] Effect of alloy composition on hot deformation behavior of some Al-Mg-Si alloys
    Odoh, Daniel
    Mahmoodkhani, Yahya
    Wells, Mary
    VACUUM, 2018, 149 : 248 - 255
  • [23] ROOM AND ELEVATED-TEMPERATURE TENSILE PROPERTIES OF A UNIDIRECTIONALLY SOLIDIFIED QUASI-BINARY AL-S (CU2MG2AL5) EUTECTIC COMPOSITE ALLOY
    OCHIAI, S
    MIZUHARA, M
    KAWASAKI, M
    MURAKAMI, Y
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1974, 15 (01): : 66 - 74
  • [24] Effect of Rapid Solidification on the Structure and Phase Composition of Mg–Al–Zn, Mg–Nd–Zr, and Mg–Li–Al Alloys
    S. Ya. Betsofen
    R. Wu
    M. M. Serov
    I. A. Grushin
    I. I. Voskresenskaya
    Russian Metallurgy (Metally), 2021, 2021 : 653 - 659
  • [25] The effect of time dependent native oxide surface conditions on the electrochemical corrosion resistance of Mg and Mg-Al-Ca alloys
    Felten, Markus
    Nowak, Jakub
    Beyss, Oliver
    Gruenewald, Patrick
    Motz, Christian
    Zander, Daniela
    CORROSION SCIENCE, 2023, 212
  • [26] Effect of Addition of Al & Ca and Heat Treatment on the Cast Mg-6Zn Alloy
    Joshi, S. S.
    Mohan, M. S.
    Seshan, S.
    Kumar, S.
    Suwas, S.
    LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 33 - +
  • [27] The effect of Ca on corrosion behavior of heat-treated Mg-Al-Zn alloy
    Wang, Y-Q
    Li, M-Z
    Li, C.
    Li, X-Y
    Fan, L-Q
    Jia, T.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2012, 63 (06): : 497 - 504
  • [28] Role of Ca on the corrosion resistance of Mg-9Al and Mg-9Al-0.5Mn alloys
    Mingo, B.
    Mohedano, M.
    Blawert, C.
    del Olmo, R.
    Hort, N.
    Arrabal, R.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 811
  • [29] Effect of Ultrasonic Treatment on Microstructures of Mg-Ca Binary Alloy
    Zhang, Zhiqiang
    Le, Qichi
    Cui, Jianzhong
    MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 677 - 680
  • [30] Heat effect of grain boundary wetting in Al–Mg alloys
    O. A. Kogtenkova
    S. G. Protasova
    A. A. Mazilkin
    B. B. Straumal
    P. Zięba
    T. Czeppe
    B. Baretzky
    Journal of Materials Science, 2012, 47 : 8367 - 8371
12345