A-TIG welding in all-position welding for mild steel pipe

被引：0

作者：

Zhang, Ruihua ^{[1
]}

Wang, Haitao ^{[1
]}

Wang, Rong ^{[2
]}

Pan, Qiangang ^{[3
]}

机构：

[1] State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China

[2] Suzhou Industrial Park A-hand Technology Co., Ltd., Suzhou 215021, Jiangsu, China

[3] Dong Fang Boiler Group Co., Ltd., Zigong 643001, Sichuan, China

来源：

Hanjie Xuebao/Transactions of the China Welding Institution | 2010年 / 31卷 / 06期

关键词：

Chemical activation - Efficiency - Inert gas welding - Low carbon steel - Gas welding;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A-TIG welding is a novel and efficient method of welding. It is characterised with higher penetration than ordinary TIG welding, less heat-affected zone, narrow weld, and less amount of deformation. Besides, it has a high welding efficiency and so on. The application of A-TIG welding in all-position welding for the mild steel pipe was studied. After the activating fluxes was deposed on the metal surface by a brusher before welding, the forced state of the weld pool at different area of the pipe was analyzed during the weld process, and the regulation of welding with activating fluxes for tube was provided. All-position welding machine was used in pipe welding. The full penetration can be got in a single pass without groove preparation for the mild steel pipes of 6 mm thickness, compared with 2 mm in conventional TIG welding process. By this process, the application range of the all-position welding machine can be extended. The efficiency of pipe welding has been improved.

引用

页码：13 / 16

共 50 条

[31] Process Parameter Optimization of A-TIG Welding on P22 Steel
Pavan, A. R.
Arivazhagan, B.
Vasudevan, M.
STRUCTURAL INTEGRITY ASSESSMENT, ICONS 2018, 2020, : 99 - 113
[32] Studies on A-TIG welding of Low Activation Ferritic/Martensitic (LAFM) steel
Vasantharaja, P.
Vasudevan, M.
JOURNAL OF NUCLEAR MATERIALS, 2012, 421 (1-3) : 117 - 123
[33] EXPERIMENTAL STUDIES AND MATHEMATICAL MODELLING OF PENETRATION IN TIG AND A-TIG STATIONARY ARC WELDING OF STAINLESS STEEL
Yushchenko, K. A.
Kovalenko, D. V.
Krivtsun, I. V.
Demchenko, V. F.
Kovalenko, I. V.
Lesnoy, A. B.
WELDING IN THE WORLD, 2009, 53 (9-10) : R253 - R263
[34] Intelligent Modeling for Optimization of A-TIG Welding Process
Chandrasekhar, N.
Vasudevan, M.
MATERIALS AND MANUFACTURING PROCESSES, 2010, 25 (11) : 1341 - 1350
[35] ATTACHMENT OF THERMOCOUPLE INSTRUMENTATION TO TEST COMPONENTS BY ALL-POSITION PERCUSSION WELDING
THOMPSON, EG
WELDING JOURNAL, 1982, 61 (06) : 31 - 33
[36] Spectral distribution characteristics of A-TIG welding arc
Liu, FY
Yang, CL
Lin, SB
Wu, L
Zhang, QT
ACTA METALLURGICA SINICA, 2003, 39 (08) : 875 - 878
[37] Experimental Studies and Mathematical Modelling of Penetration in TIG and A-TIG Stationary Arc Welding of Stainless Steel
Konstantin A. Yushchenko
Dmitry V. Kovalenko
Igor V. Krivtsun
Vladimyr F. Demchenko
Igor V. Kovalenko
Aleksey B. Lesnoy
Welding in the World, 2009, 53 : R253 - R263
[38] Microstructural Aspects of TIG and A-TIG Welding Process of Dissimilar Steel Grades and Correlation to Mechanical Behavior
Vishvesh J. Badheka
Ritwik Basu
Joseph Omale
Jerzy Szpunar
Transactions of the Indian Institute of Metals, 2016, 69 : 1765 - 1773
[39] Comparison of Thermal Efficiency between A-TIG and Conventional TIG Welding
Donega, Thiago Jose
Costa, Thonson Ferreira
Arencibia, Rosenda Valdes
Vilarinho, Louriel Oliveira
SOLDAGEM & INSPECAO, 2014, 19 (01): : 28 - 41
[40] Special basic flux cored wire for all-position pulsed welding
French, IE
Bosworth, MR
WELDING JOURNAL, 1997, 76 (03) : S120 - S124

← 1 2 3 4 5 →