A-TIG welding in all-position welding for mild steel pipe

被引：0

作者：

Zhang, Ruihua ^{[1
]}

Wang, Haitao ^{[1
]}

Wang, Rong ^{[2
]}

Pan, Qiangang ^{[3
]}

机构：

[1] State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, China

[2] Suzhou Industrial Park A-hand Technology Co., Ltd., Suzhou 215021, Jiangsu, China

[3] Dong Fang Boiler Group Co., Ltd., Zigong 643001, Sichuan, China

来源：

Hanjie Xuebao/Transactions of the China Welding Institution | 2010年 / 31卷 / 06期

关键词：

Chemical activation - Efficiency - Inert gas welding - Low carbon steel - Gas welding;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

A-TIG welding is a novel and efficient method of welding. It is characterised with higher penetration than ordinary TIG welding, less heat-affected zone, narrow weld, and less amount of deformation. Besides, it has a high welding efficiency and so on. The application of A-TIG welding in all-position welding for the mild steel pipe was studied. After the activating fluxes was deposed on the metal surface by a brusher before welding, the forced state of the weld pool at different area of the pipe was analyzed during the weld process, and the regulation of welding with activating fluxes for tube was provided. All-position welding machine was used in pipe welding. The full penetration can be got in a single pass without groove preparation for the mild steel pipes of 6 mm thickness, compared with 2 mm in conventional TIG welding process. By this process, the application range of the all-position welding machine can be extended. The efficiency of pipe welding has been improved.

引用

页码：13 / 16

共 50 条

[21] Intelligent control system of all-position welding robot
Jiao, X.D.
Jiong, L.P.
Xue, L.
Chen, Q.
Sun, Z.G.
Wang, J.B.
2000, Harbin Research Institute of Welding (21):
[22] Pipeworks welding in orbital A-TIG process
Cortial, F
Richard, JY
ADVANCED MARINE MATERIALS: TECHNOLOGY AND APPLICATIONS, INTERNATIONAL CONFERENCE, 2003, : 151 - 157
[23] Optimization of the A-TIG welding for stainless steels
Jurica, M.
Kozuh, Z.
Garasic, I.
Busic, M.
E-MRS FALL SYMPOSIUM I: SOLUTIONS FOR CRITICAL RAW MATERIALS UNDER EXTREME CONDITIONS, 2018, 329
[24] The mechanism of penetration increase in A-TIG welding
Zhang, Rui-Hua
Pan, Ji-Luan
Katayama, Seiji
FRONTIERS OF MATERIALS SCIENCE, 2011, 5 (02) : 109 - 118
[25] The mechanism of penetration increase in A-TIG welding
Rui-Hua Zhang
Ji-Luan Pan
Seiji Katayama
Frontiers of Materials Science, 2011, 5
[26] Evaluation of welding-induced residual stress and distortion in A-TIG welding of duplex stainless steel
Siyavoshi, A.
Shakhesi, S.
Afshar, M. Reza
Hashemzadeh, M.
Noghabi, M.
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2023, 17 (01) : 9324 - 9337
[27] ALL-POSITION FLUX-CORED ARC-WELDING
HARRIS, RL
METAL PROGRESS, 1979, 115 (02): : 52 - 54
[28] Mechanism of increasing A-TIG welding penetration
Liu, FY
Yang, CL
Lin, SB
Wu, L
Zhang, QT
ACTA METALLURGICA SINICA, 2003, 39 (06) : 661 - 665
[29] Deep Learning Detection Method of All-position Welding Pool
Ma X.
Xia P.
Liu H.
Shi T.
Wang Z.
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2023, 59 (12): : 272 - 283
[30] Type and dimension synthesis of a portable all-position welding robot
Liu, Yu
Zhao, Jing
Chen, Shu-Jun
Lu, Zhen-Yang
INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION, 2010, 37 (03): : 293 - 301

← 1 2 3 4 5 →