Cooperative effect of molecular orientation and β-form on toughening injection-molded isotactic polypropylene with β-nucleating agent

被引：0
|
作者：
机构：
[1] Lv, Ruihua
[2] Li, Zhujun
[3] Na, Bing
[4] Zou, Shufen
[5] Pan, Huayan
来源：
Na, B. (bingnash@163.com) | 1600年 / John Wiley and Sons Inc卷 / 125期
关键词：
The toughness of conventional injection-molded isotactic polypropylene bars has been investigated with respect to the notch location and β-nucleating agent. Superior toughness is achieved in the β-nucleated bars with notches near the gate; but is absent in the near-gate bars without β-nucleating agent or in the β-nucleated ones far from the gate. With detailed structural analysis across the sample thickness; it is indicated that in these tough bars; extensive flow close to the surface suppresses the formation of β-form to a large extent but favors the generation of oriented α-form; whereas toward inner region; an opposite tendency is presented with the decay of flow strength and the activation of β-nucleating agent. Allowing that this peculiar hierarchical structure is absent in other two kinds of bars; it is deduced that the cooperative effect of molecular orientation of α-form in the skin layer and rich β-form in the inner region is responsible for the significant toughness enhancement in the β-nucleated bars near the gate. © 2012 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [31] Effect of a nucleating agent on the fracture toughness of isotactic polypropylene
    Ouederni, M
    Phillips, PJ
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 2312 - 2316
  • [32] Effect of nucleating agent addition on crystallization of isotactic polypropylene
    Feng, Y
    Jin, X
    Hay, JN
    JOURNAL OF APPLIED POLYMER SCIENCE, 1998, 69 (10) : 2089 - 2095
  • [33] Crystallization and phase morphology of injection-molded isotactic polypropylene (iPP)/Syndiotactic polypropylene (sPP) blends
    Zou, Xiao-Xuan
    Yang, Wei
    Zheng, Guo-Qiang
    Xie, Bang-Hu
    Yang, Ming-Bo
    JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 2007, 45 (21) : 2948 - 2955
  • [34] Study on thermal expansion in injection-molded isotactic polypropylene and thermoplastic elastomer blends
    Ono, Michio
    Nakajima, Ken
    Nishi, Toshio
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 107 (05) : 2930 - 2943
  • [35] The Morphology and Mechanical Properties of Isotactic Polypropylene Injection-Molded Samples with the Presence of β-Nucleation Agent and Periodical Shear Field
    Li, Xinpeng
    Guo, Chao
    Zhang, Yu
    Liu, Kejun
    Zhang, Jie
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2015, 54 (02): : 215 - 229
  • [36] EFFECT OF SOME MOLECULAR-PARAMETERS ON FLEXURAL PROPERTIES OF INJECTION-MOLDED POLYPROPYLENE
    FUJIYAMA, M
    KIMURA, S
    JOURNAL OF APPLIED POLYMER SCIENCE, 1977, 21 (08) : 2283 - 2288
  • [37] Unusual hierarchical structures of micro-injection molded isotactic polypropylene in presence of an in situ microfibrillar network and a β-nucleating agent
    Zhao, Zhongguo
    Yang, Qi
    Kong, Miqiu
    Tang, Dahang
    Chen, Qianying
    Liu, Ying
    Lou, Fangli
    Huang, Yajiang
    Liao, Xia
    RSC ADVANCES, 2015, 5 (54): : 43571 - 43580
  • [38] Toughness profile in injection-molded polypropylene:: The effect of the β-modification
    Raab, M
    Kotek, J
    Baldrian, J
    Grellmann, W
    JOURNAL OF APPLIED POLYMER SCIENCE, 1998, 69 (11) : 2255 - 2259
  • [39] The orientation of the dispersed phase and crystals in an injection-molded impact polypropylene copolymer
    Liu, Xuanbo
    Miao, Xiaopei
    Cai, Xiaoguang
    Shao, Jingbo
    Zou, Fasheng
    Song, Wenbo
    Qiao, Jinliang
    Wu, Changjiang
    POLYMER TESTING, 2020, 90
  • [40] The effect of β-nucleating agent on the self-nucleation of isotactic polypropylene
    Yue, Yang
    Sha, Xuan
    Wang, Fushan
    Gao, Yan
    Zhang, Liangliang
    Wang, Xinxin
    Feng, Jiachun
    POLYMER, 2021, 229
12345