Cooperative effect of molecular orientation and β-form on toughening injection-molded isotactic polypropylene with β-nucleating agent

被引：0
|
作者：
机构：
[1] Lv, Ruihua
[2] Li, Zhujun
[3] Na, Bing
[4] Zou, Shufen
[5] Pan, Huayan
来源：
Na, B. (bingnash@163.com) | 1600年 / John Wiley and Sons Inc卷 / 125期
关键词：
The toughness of conventional injection-molded isotactic polypropylene bars has been investigated with respect to the notch location and β-nucleating agent. Superior toughness is achieved in the β-nucleated bars with notches near the gate; but is absent in the near-gate bars without β-nucleating agent or in the β-nucleated ones far from the gate. With detailed structural analysis across the sample thickness; it is indicated that in these tough bars; extensive flow close to the surface suppresses the formation of β-form to a large extent but favors the generation of oriented α-form; whereas toward inner region; an opposite tendency is presented with the decay of flow strength and the activation of β-nucleating agent. Allowing that this peculiar hierarchical structure is absent in other two kinds of bars; it is deduced that the cooperative effect of molecular orientation of α-form in the skin layer and rich β-form in the inner region is responsible for the significant toughness enhancement in the β-nucleated bars near the gate. © 2012 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
相关论文
共 50 条
  • [21] Self-toughening and self-reinforcing injection-molded isotactic polypropylene via midfrequency vibration field
    Li, Youbing
    Zhan, Jie
    Deng, Ming
    Huang, Hong
    Shen, Kaizhi
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2006, 45 (05): : 911 - 922
  • [22] Crystal orientation distributions in injection-molded polypropylene compounds
    Chen, Z.
    Finet, M.C.
    Liddell, K.
    Thompson, D.P.
    White, J.R.
    Journal of Applied Polymer Science, 1992, 46 (08): : 1429 - 1437
  • [23] CRYSTAL ORIENTATION DISTRIBUTIONS IN INJECTION-MOLDED POLYPROPYLENE COMPOUNDS
    CHEN, Z
    FINET, MC
    LIDDELL, K
    THOMPSON, DP
    WHITE, JR
    JOURNAL OF APPLIED POLYMER SCIENCE, 1992, 46 (08) : 1429 - 1437
  • [24] MEASUREMENT OF MOLECULAR ORIENTATION IN INJECTION-MOLDED POLYPROPYLENE BY MICRO-RAMAN SPECTROSCOPY
    Akashige, Etsushi
    Usami, Takao
    ANALYTICAL SCIENCES, 1991, 7 : 1655 - 1656
  • [25] Study of the Molecular Orientation Heterogeneity in Polypropylene Injection-Molded Parts by Raman Spectroscopy
    Martin, J.
    Margueron, S.
    Fontana, M.
    Cochez, M.
    Bourson, P.
    POLYMER ENGINEERING AND SCIENCE, 2010, 50 (01): : 138 - 143
  • [26] MOLECULAR-ORIENTATION IN INJECTION-MOLDED POLYPROPYLENE COPOLYMERS WITH ETHYLENE - ANALYSIS OF MOLECULAR-ORIENTATION PROCESS
    FUJIYAMA, M
    WAKINO, T
    INTERNATIONAL POLYMER PROCESSING, 1992, 7 (02) : 159 - 164
  • [27] Mechanical properties of injection-molded isotactic polypropylene/roselle fiber composites
    Junkasem, Jirawut
    Menges, James
    Supaphol, Pitt
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 101 (05) : 3291 - 3300
  • [28] Injection-Molded Isotactic Polypropylene Colored with Green Transparent and Opaque Pigments
    Janostik, Vaclav
    Senkerik, Vojtech
    Manas, Lukas
    Stanek, Michal
    Cvek, Martin
    INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES, 2023, 24 (12)
  • [29] The synergistic effects of β-nucleating agent and ethylene octene copolymer on toughening isotactic polypropylene
    Wang, Feifei
    Du, Hainan
    Liu, Hong
    Zhang, Yu
    Zhang, Xiongwei
    Zhang, Jie
    POLYMER TESTING, 2015, 45 : 1 - 11
  • [30] Effect of polystyrenes with different architectures on the -nucleating efficiency and toughening of isotactic polypropylene
    Liu, Jingru
    Li, Chen
    Hu, Fangming
    POLYMER INTERNATIONAL, 2018, 67 (05) : 506 - 514
12345