Dynamic behaviour improvement for a torus milling cutter using balance of the transversal cutting force

被引：0
|
作者：
Gilles, Patrick [1 ]
Cohen, Guillaume [1 ]
Monies, Frederic [1 ]
Rubio, Walter [1 ]
机构：
[1] Laboratoire de Génie Mécanique, Filière de Génie Mécanique, Bât. 3PN, 118 route de Narbonne, Toulouse Cedex 4 31062, France
来源：
International Journal of Advanced Manufacturing Technology | 2009年 / 40卷 / 7-8期
关键词：
This article deals with five-axis machining of free-form surfaces with torus cutters and round inserts. An orientation of the tool axis to make a dynamic tool behaviour as stable as possible is presented in this work. With this new method an improvement of 50% on different roughness criteria can be obtained. For that; tool axis inclination will be towards the back of the tool compared to the feed direction that will allows to all inserts to machine simultaneously. The global cutting phenomenon is then continuous and it is thus possible to find a tool axis inclination that decreases its vibrations. It will be shown that this calculated tool axis inclination allows on the one hand to reduce the transversal tool deflections and in the other hand to stabilize the dynamic tool behaviour. A better quality on the finished workpiece is then obtained. © 2008 Springer-Verlag London Limited;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：669 / 675
相关论文
共 50 条
  • [41] Accurate cutting force prediction of helical milling operations considering the cutter runout effect
    Zhou-Long Li
    Ye Ding
    Li-Min Zhu
    The International Journal of Advanced Manufacturing Technology, 2017, 92 : 4133 - 4144
  • [42] Improvement of dynamic properties in milling by integrated stepped cutting
    Karpuschewski, B.
    Batt, S.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (01) : 85 - 88
  • [43] Analysis of cutting force and wear area during the wear-out of a milling cutter
    Li, Xiwen
    Du, Runsheng
    Yang, Shuzi
    Huazhong Ligong Daxue Xuebao/Journal Huazhong (Central China) University of Science and Technology, 1998, 26 (02): : 45 - 48
  • [44] Cutting force modelling for peripheral milling with a disk cutter considering the instantaneously engaged area
    Liu, Xinfeng
    Liu, Riliang
    Feng, Jiaming
    INTERNATIONAL JOURNAL OF MANUFACTURING RESEARCH, 2024, 19 (01) : 1 - 19
  • [45] Accurate cutting force prediction of helical milling operations considering the cutter runout effect
    Li, Zhou-Long
    Ding, Ye
    Zhu, Li-Min
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 92 (9-12): : 4133 - 4144
  • [46] Influence of Cutter Orientations on Cutting Force in Ball End Milling of TC17
    Yao, Chang-Feng
    Lin, Jian-Nan
    Xie, Shao-Hua
    Tan, Liang
    2016 INTERNATIONAL CONFERENCE ON MECHANICS DESIGN, MANUFACTURING AND AUTOMATION (MDM 2016), 2016, : 396 - 402
  • [47] Research on Instantaneous Cutting Force of High Speed Ball-end Milling Cutter
    Qi, C. X.
    Jiang, B.
    Zheng, M. L.
    Yang, Y. J.
    Sun, P.
    HIGH SPEED MACHINING, 2011, 188 : 277 - +
  • [48] Evaluation of the dynamic cutting force coefficients under dynamic behaviour
    Benmohammed, B.
    Lapujoulade, F.
    Moisan, A.
    Mazouz, H.
    Assas, M.
    MATERIAUX & TECHNIQUES, 2005, 93 (9-12): : 369 - 373
  • [49] Adaptive Dynamic Cutting Force Control Analysis for Peripheral Milling
    Slimani, Abdesselem
    Kherraf, Allaoua
    Zidani, Kamel
    ENGINEERING TECHNOLOGY & APPLIED SCIENCE RESEARCH, 2023, 13 (02) : 10228 - 10231
  • [50] Mechanistic cutting force model parameters evaluation in milling taking cutter radial runout into account
    Riviere-Lorphevre, Edouard
    Filippi, Enrico
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 45 (1-2): : 8 - 15
12345